GOOLOO GT1500 Turbo Series Jump Starter User Manual

June 5, 2024
GOOLOO

GT1500 Turbo Series Jump Starter
User Manual

SUPERSAFE is a safety protection technology by GOOLOO

Thank you for choosing the GOOLOO jump starter. To ensure a good user experience, personal safety, and property security, please read all of the instructions carefully before using this product, please keep this manual for easy reference.

Charge It First !

While reading through the manual, you can begin to charge up your GT1500 with your mobile phone charger and a type-c cable provided.

GOOLOO GT1500 Turbo Series Jump Starter - QR codehttp://www.gooloo.com/
Scan to more information about GOOLOO product

Parts and Functional Description

GOOLOO GT1500 Turbo Series Jump Starter - Fig 2

1. Indicator 5. Quick Charge Output
2. Power Switch 6. USB-C 5V/3A In/Out
3. DC 15V/10A Output (5521) 7. LED Flashlight
4. 5V/2.4A Output 8. Jumper Cable Socket

Operation Instructions

Battery Indicator:
Press the power switch to check the battery power:

Indicator Unlit 1 solid 2 solid 3 solid 4 solid
Battery power 0% 25% 50% 75% 100%

The indicator will blink one by one during the period of charging. Different numbers of solid indicators show different battery power. All indicators will be turned off automatically when the charging process was finished.

How to Charge the GT1500

This unit can be charged with a type-c cable provided and a 5V wall charger (phone charger) or a car charger ( Note: 5V wall charger is not included).
(Only via the QC3.0 wall charger or car charger can achieve the quick charge input function. These two accessories can be purchased separately. )

GOOLOO GT1500 Turbo Series Jump Starter - Fig 3

How to Start a 12V Vehicle

Make sure the unit is over 50% charged (check the battery indicator> 2 bars). If the unit has not been used in more than two months, you should charge it first.

GOOLOO GT1500 Turbo Series Jump Starter - Fig 4

  1. Connect the smart jumper cable fully into this unit and make sure the two indicators on the jumper cable is off.

  2. Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (-) battery terminal.

  3. Check the indicator lights on the jumper cable and operate following the instructions below:
    GEEN UGHT on and solid: Indicates the connection is correct and the circuit is working, you can start the vehicle directly.|
    ---|---
    RED UGHT on and solid with beeping:
    Indicates the connection is wrong, you need to correct the battery clamps as step 2 mentioned, wait for the GREEN UGHT on and solid, then start the vehicle directly.|
    GREEN UGHT Blinks: Indicates the vehicle battery voltage is too low, press the “BOOST ” button on the jumper cable, and the GREEN LIGHT will be on and solid, then start the vehicle immediately within the 30s.|
    No Lights on, No beeping: Indicates that the vehicle battery may be damaged. First of all, make sure the correct connection, then press the “BOOST “button on the jumper cable, the GREEN LIGHT will be on and solid, then start the vehicle immediately within the 30s.|

  4. Start the vehicle when the GREEN LIGHT is on and solid.

  5. When the vehicle has been started, remove the jumper cable from the jump starter and vehicle battery.

15V/10A DC Output (12-16.8V,150W Max)

  • Cigarette Lighter Socket Output
    Connect the 12V devices that need to be powered by a cigarette lighter socket (the Cigarette A lighter Socket Adapter is included).

  • *52.1mm DC Output
    * You can connect the 12V devices that need to be powered by the DC 12V. Please check if the devices support 12V DC input ( the diameter of the DC port is 5.52.1mm) .  If not, you will not be able to use this DC output.

How to Charge Your Phone or Tablet

  1. Plug the charging cable into the USB-A port and your devices.
  2. Press the power switch, the unit can identify your device and charge it automatically. The battery indicators will be lit up when charging.

GOOLOO GT1500 Turbo Series Jump Starter - Fig 10How To Turn On/Off The LED Flashlight

Long press the power switch for 3 seconds to turn on the LED light. There are 3 modes of LED light that appear in order (Normal, Strobe, SOS, Off ) if you press slightly.

Water-Resistant

It doesn’t matter when the unit is touched with small splashes, you just need to wipe it off. It can prevent splashing water in your daily life, but it is not allowed to be immersed in water.

Package Content

# Part Name Quantity
1 Host 1
2 Carrying Bag 1
3 USB-A to Type-C Cable 1
4 Smart Jumper Cable 1
5 Car Charger 1
6 Cigarette Lighter Socket Adapter 1
7 User Manual 1

Technical Specification

Input: Type-C 15W(5V/3A)
Output: Type-C 15W (5V/3A),

Quick Charge (5V/3A,9V/2A, 12V/1.5A), 5V/2.4A, 15V/10A
Capacity:| 55.5Wh
Starting Current| 400A (3s)
Peak Current:| 1500A
Size| 1889335.5mm
Weight:| 570g
Operating Temp.| -20°C 60°C/-4°F-140°F
Lifetime| >1000 cycles
Full Charging Time:| About 5 hours

Trouble Shooting

TROUBLE REASON REMEDIES

It has changed for a long time, but the fourth battery indicator is still blinking.| Battery. power recognition
problem.| Disconnect the charging cable and plug it in again, try to continue charging for hours.
No response when pressing the power
switch| Low voltage protection is started.| Try to charge the unit with a wall charger to activate it.
This unit can not be charged, the first battery indicator blinks all the time| The unit is over-discharged or g e defective| Please contact us at contact@gooloo.corn
This unit is overheated or swelled| The unit is over-discharged or defective| Please contact us at contact@gooloo.com

If there is any other problem with this unit, please contact us directly at contact@gooloo.com , we will do our best to solve the problem within 24 hours.

Toxic and Harmful Substances

Composition and amount of toxic or harmful substance in this product

Pb Hg Cd Cr(Vi) PBB PBDE
0 0 0 0 0 0

0: Indicate that the content of harmful substances in all homogeneous materials is all lower than the prescribed limit of MCV (the standard 2002/95/EC/RoHS)

FAQ

Q1: What is the operating temperature of this unit and how to store it?
A: This unit is a lithium polymer battery, the operating temp is -20-60 °C/ -4-140°F. If the ambient temperature is higher than 60°C/140°F, the internal construction of the polymer lithium-ion cells will be damaged, it may swell and become unsafe. So don’t store the device in a vehicle parked in hot weather for long periods of time.
Q12: Why it shut off in the 30s when charging for other devices?
A. This product may not be able to charge for the devices that need weak current like iPhone 6 series, headphones, smartwatches,etc. Because this unit has a minimum load current (200mA). it will be automatically off after 30s if the load current is less than 200mA.

Warning

  1. Read this instruction manual carefully before using this unit.

  2. Use caution while using this unit. Injury to self, or damage to the unit or the vehicle battery if precautions are not followed.

  3. Do Not allow use by persons who do not have the proper knowledge or ability to operate the device without supervision.

  4. Do Not use it as a toy. Keep the unit away from children to avoid accidents.

  5. 5. This unit is for 12V vehicles only, it may not be suitable for other vehicles. It is forbidden to use for other machines such as aircraft, boats, etc.

  6. Do Not use this unit if any cable, clamp, or cord is damaged or if the unit is overheated or swelled or leaking fluid.

  7. Do Not use in place of a vehicle battery or as a vehicle battery charger.

  8. Do Not use the unit to start a vehicle while charging the internal battery.

  9. Use the jumper cable provided and use the correct and qualified charger to charge this unit

  10. Do Not let this unit over-discharge (do not let the battery run to empty), please charge it regularly; it would be best to recharge it every 3 months.

  11. Make sure the blue plug of the jumper cable is plugged fully into the jumper socket; otherwise, the blue plug could melt.

  12. Make sure the battery terminal is clean before starting and make sure the battery clamps are well connected. If the battery terminals on the vehicle are dirty or corroded, the output power of the unit will be lessened.

  13. Do Not start the vehicle continuously more than four times within 10mins, if the vehicle can’t be started at one time, please wait at least 30s to restart it.

  14. Do Not connect the two clamps together.

  15. Do Not connect the jump starter’s clamps to the battery reversely while pressing the “BOOST” button to avoid an accident.

  16. Use this unit to start the vehicle when the battery indicator is more than 2 bars.

  17. Do Not keep the unit connected to the vehicle battery after successfully starting the engine. Remove the product from the vehicle battery after starting the engine. If not, it could lead to damage.

  18. Do Not recharge this product immediately after using it to start the vehicle, please cool it down for 30 minutes before charging.

  19. Do Not allow the product to become wet and Do Not immerse in water.

  20. Do Not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.

  21. Do Not modify or disassemble the unit. Only a repair technician may repair this unit.

  22. Do Not expose the product to extreme heat or fire.

  23. Do Not drop or crush the unit. If the unit has received a sharp blow or is damaged in any other way, a qualified battery technician should check it.

  24. Do Not store in locations where the temperature may exceed 60°C/ 140°F.

  25. Charge only at ambient temperature between -10-45°C/ 14-113°F. 26. Under extreme conditions, the battery may leak. If a liquid is leaking from the unit Do Not handle it with bare hands. In case of skin, contact wash with soap and water immediately.
    If the liquid contacts to eyes, rinse the eyes with cold running water for at least 10 minutes and get medical treatment immediately.

  26. The unit contains lithium-based batteries. At end of the product life, or if the unit is leaking liquid, dispose of the unit according to local regulation.

Your Warranty Includes

12+6 Months Online After-Sales Service
Within 12 months, we will provide timely and effective online after-sales service after your purchase, if you are our member customer, you will get an extra 6 months of service, a total of 18 months.

30 Days Money Back Guarantee
Within the first 30 days after your purchase, you can apply to return it through Amazon when you have any issues.

30 Days to 12 Months ( 18 Months for Member Customers)
We will replace the defective unit due to manufacturing issues with a new one within 12 months; if you are our member customer, within 18 months.

http://www.gooloo.com/account.php?module=create
Sign-up to be our member and get an extra 6 months warranty

Disclaimer

A. The warranty is valid upon presentation of the original receipt ( Order ID )by the original purchaser with the product that need to be repaired or replaced.
B. The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification, or repairs by unauthorized third parties.
C. We are not liable for any incidental or consequential damage that arises from incorrect use or misuse of this product.
D. All warranty claims are limited to repair or replacement of the defective product and at the sole discretion of GOOLOO.

Attention

GOOLOO GT1500 Turbo Series Jump Starter - Fig 11

Customer Service

| 12+6 Months Limited Warranty Service
---|---
|  Lifetime Technical Service
| Feel Free to Contact Us at contact@gooloo.com (recommend)
| For FAQ and More Information www.gooloo.com
| 1-888-886-1805
Mon.-Fri. PST 9:00a.m.-5:00p.m.
| @gooloofans
| @GoolooOfficial

Thank you For choosing
GOOLOO GT1500 Turbo Series Jump Starter - icon 8
Made In Chaina

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals