Taizhou Huangyan Yixun Furnishings MEET Auto Self-Cleaning Litter Cabin User Manual
- June 5, 2024
- Taizhou Huangyan Yixun Furnishings
Table of Contents
MEET
MOME
Auto Self-Cleaning Litter Cabin
User’s Manual
This product will automatically sense your pet in and out, replace you to complete a complex litter is cleaned and the litter is automatically collected in the dustbin below. When the garbage can overflows, it will remind you to change the garbage bag. APP binding can be an anywhere remote operation, keep track of equipment status.
MEET
MOME
Thanks for your purchasing of our Auto Self-Cleaning Litter Cabin
First time of use
This product has been pre-installed
OPEN AND USE IT
Take out the garbage bin and hang up the garbage bag.
Take out the garbage bin and hang up the garbage bag.
Insert clasp to fix the garbage bag. Please put back the garbage smoothly when finished.
Pour in cat litter to make sure the surface is smooth. ( About 4.5L )
***** Be sure to pour in cat litter before starting the machine!
Plugin the power, and press 3s to turn it on.
TIPS
- Confirm for the first time whether the upper cover and inner barrel are installed in place because there is a safety power off switch on the right side of the upper cover. When the cover is not in place, the device will not be powered on. (the top cover may vibrate during transportation, or the cover may misplace when the user takes it out of the box.)
- Confirm whether the power cord is installed in place and whether the power supply voltage conforms to the product standard. Otherwise use the appropriate voltage converter.
- To eliminate these reasons, it still cannot start up normally. Please contact the official after-sales service directly. To provide you with professional help.
Download MEET APP
http://aliapp.open.uc.cn/qrcode/landing?code=Vl7EU2sATIXtAyagLF%2Bv%2FQ%3D%3D
TIPS
- For the first use, a small amount of used litter can be laid on the surface of the new litter to familiarize the cat with the smell.
- musgamoniisistimit itrilafflailagtgiraM310A. Operate the equipment in front of the cat to let them know this is not a threatening thing.
- Reward the cat by placing some snacks near the equipment.
- The new equipment can be placed with the old one. please do not clean the old one. Cats like clean toilets. They will use the new one after a period of time.
Component
You can learn more about our product by reading the Component
introduction.
1. Ballroom
2. Strainer
3. Anti sticking silica gel
4. Gravity sensor
5. Top cover ( removable )
6. Display panel| 7. Key panel
8. Base ( non-removable )
9. Top cover buckle
10. Garbage bin
11. Power connection
12. Lampshade
---|---
Direction for use
In order to let you and your pets enjoy our product faster, please read the instructions patiently.
| 
---|---
Cleaning
Clean up the cat litter cabin regularly to give your pets a clean environment.
Clean the garbage bin
When the dustbin overflows, the machine begins to alarm and pause. Meanwhile,
APP will push the notification to your phone at the same time. Now, Take out
of the garbage bin and change into a new garbage bag. Click the POWER button
once to clear the alarm after putting the garbage bin back.
Replace all cat litter
Cats like using clean toilets, we recommended that the whole cat litter need
to be replaced monthly.
Clean the ballroom
When it is necessary ro clean the inside of the ballroom, open the top cover
and take out the ballroom. There are no electrocircuits in the ballroom,
Please rest assured to clean up.
- Please make sure there is no water on the gear before putting it back on the base.
- Please make sure that the ballroom is dry enough to pour new cat litter into it.
Safety design
Safety design will make your pets safer
-
Running paused:
The machine will be paused if the cat (..?-1kg) jumps on it while it is working. -
To prevent the clip:
When the sand leak is blocked by bodies(crumbs or cat’s claws), the equipment will sense this situation and carry out the anti-clip rotation. -
Use 1 2V safety voltage to prevent pets get an electric shock.
CAUTION
- This equipment is suitable for small particles of cat litter, such as bentonite cat litter and tofu crushed s–and.
- The weight will be initialized when it the rebooted. Please complete the preparation before rebooting.
- Please place the equipment on dry, stable, and horizontal ground. The ground should not be too soft to avoid the wrong reading of the gravity sensor.
- To avoid gravity sensor damage, do not push the equipment directly when moving it.
- Before connecting the power, please check the marked voltage of the product is consistent with the local supply voltage. If not, please use the appropriate power converter. • Do not place the equipment in a high temperature or humid environment to avoid damaging the circuit.
- Do not place anything on the equipment to avoid incorrect readings of the gravity sensor.
- After cleaning the garbage bin, please make sure the installation is in place.
- If you have a question about our product, please co-next our official professional customer service.
Product Parameters
| name | MOME Auto Self- cleaning Litter Cabin | Material | PP |
|---|---|---|---|
| (Size) | 650.‘630.‘660 (mm) | Weight | 12kg |
| (voltage) | 12V | (Power) | 6W Standby Mode1W/ Operating Mode 6W |
| (Max weight) | 25kg | (Weight error range) | ±0.5kg |
| (Cat litter capacity) | 4.5L |
MEET
The MEET team is consist of young designers.
We are committed to satisfying the needs of Pets and owners.
BRAND
FCC statement
This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions:
- This device may not cause harmful interference and
- This device must accept any interference that is received, including any interference that may cause undesired
RF exposure warning :
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
a minimum distance of 20cm between the radiator & body.
This device is acting as a slave and operates in the 2.4 GHz (2412 —2462 MHz)
band. Ad Hoc function is supported but not able to operate on non-US
frequencies.
Do not use the device in an environment below a minimum of -30 °C or a maximum
over 50°C. NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
| 
---|---
http://weixin.qq.com/r/QUR6YrvEvObDrf8B9xFT|
https://u.wechat.com/EKZx5QO3hPX6yQw0uOoSM_g