GOOLOO GE4500 Jump Starter 4500A Peak Car User Manual
- June 17, 2024
- GOOLOO
Table of Contents
User Manual
Jump Starter
ELITE SERIES
4500A UMP STARTE
Model :GE4500
SUPERSAFE is a safety protection technology by GOOLOO
Model No.: GE4500
Thank you for choosing GOOLOO jump starter. To ensure a good user experience,
personal safety, and property security, please read all of the instructions
carefully before using this product, please keep this manual for easy
reference.
Charge It First
While reading through the manual, you can begin to charge up your GE4500 with
your mobile phone charger and the type-c cable attached.
Parts and Functional Description
Operation Instructions
Battery Indicator:
Press the power switch to check the battery power:
The indicator will blink one by one during the period of charging. Different numbers of solid indicators show different battery power. All indicators will be turned off automatically when the charging process has finished.
How to Charge the GE4500
This unit can be charged with a type-c cable attached and a 5V wall
charger(phone charger) or car charger.
(Note: 5V wall charger and car charger is not included)
( Only via the QC3.0 wall charger or car charger can achieve the quick charge
input function, QC3.0 wall charger and car charger can be purchased
separately. )
Jump start 12V vehicle instruction:
- Connect the blue plug fully seated into the host, and make sure the Starting State Indicator is off.
- Connect battery clamps to car battery terminals correctly. Red Clamp to the positive(+) battery terminal, Black Clamp to the negative(-) battery terminal.
- Try the ignition to “Start” position
- Start engine successfully, remove the blue plug from the host
- Remove the battery clamps from the car battery terminals.
Green Light On: Telling the connection is correct and the circuit is
working, you can turn on the engine to jump-start directly.
Red Light On With Alarm Buzzer: Telling the connection is wrong, or
short-circuit happens.Check and correct the clamps till the GREEN LIGHT on,
then turn on the engine.Red Light On With Alarm Bleep:
Telling the load is short-circuit.Check and correct the connection till the
GREEN LIGHT on, then turn on the engine.
Red Light Blinking With Alarm Buzzer: Saying the vehicle battery is low voltagepress the “BOOST” button, wait GREEN LIGHT becomes solid, then turn on the engine within 30s.
No Light On: Saying the vehicle’s battery maybe damaged, after confirming the clamps connection is correct, press the “BOOST” button, wait GREEN LIGHT is on, and then turn on the engine within 30s.
Red Light And Green Light Blinking: Saying the host goes to Protection Situation after 4times continuously start, wait for 120s then turn on the engine.If it still can not start the car, please consult Professional persons, NOT make jump-start again.
How to Charge Your Phone or Tablet
- Plug the charging cable into USB-A port and your devices.
- Press the power switch, the unit can identify your device and charge it automatically. The battery indicators will be lit up when charging.
How To Turn On/Off The LED Flashlight
Long press the power switch 3 seconds to start the LED light. There are 3
modes of LED light appear in order (Normal, Strobe, SOS, Off ) if you press
slightly.
Package Content
| # | Part Name | Quanty |
|---|---|---|
| 1 | Host | 1 |
| 2 | Cloth bag | 1 |
| 3 | USB-A to Type-C Cable | 1 |
| 4 | Type-C to Type-C Cable | 1 |
| 5 | Smart Jumper Cable | 1 |
| 6 | User Manual | 1 |
Technical Specification
| USB-C Input: | 5V/2A,9V/2A |
|---|
USB-A Output:
5V :1A| 5V 2.1A
Capacity:| 5V 2.1Wh
Starting Current:| 550A
Peak Current:| 4500A
Size :| 2259134mm
Weight:| 750g
Trouble Shooting
| TROUBLE | REASON | REMEDIES |
|---|
It has charged for a long time, but the fourth battery indicator is still
blinking.| Battery power recognition problem.| Disconnect the charging cable
and plug it in again, try to continue charging for hours.
No response when pressing the power
switch.| Low voltage protection is started.| Try to charge the unit with wall
charger to activate it.
This unit can not be charged, the first battery indicator
blinks all the time.| The unit is over discharged or defective| Please contact
us karen@gooloo.com
This unit is over heated or swelled.| The unit is over discharged or
defective| Please contact us karen@gooloo.com
If there is any other problem with this unit, please contact us directly at karen@gooloo.com, we will do our best to solve the problem within 24 hours.
Toxic and Harmful Substances
Composition and amount of toxic or harmful substance in this product
0: Indicate that the content of harmful substances in all homogeneous materials is all lower than the prescribed limit of CV (the standard 2002/95/EC/RoHs)
FAQ
FAQ Q1: What is the operating temperature of this unit and how to store it?
A: This unit is lithium polymer battery, operating temp is -20-60 ºC/ -4-140ºF. If the ambient temperature is higher than 60ºC/140ºF, the internal construction of the polymer lithium-ion cells will be damaged, it may swell and become unsafe. So don’t store the device in vehicle which parked in hot weather for long periods of time.
Q2: How to start a vehicle with this unit?
A: Please refer to the instructions about “How to Start a 12V Vehicle.”
Q3: Why do Green and Red light on the jumper cable blink alternately?
A: The smart jumper cable has an Over-start Protection function. If you start the vehicle continuously for more than 4 times within 10 minutes, the jumper cable will turn into Over-start Protection (Green and Red light on the jumper cable will blink alternately), meanwhile, there will be no output of battery clamps. you can disconnect the jumper cable plug from the jumper starter, the Over-start Protection will be removed.
Q4: How do you know if this unit is connected to the vehicle correctly?
A: With the battery clamps connected to the vehicle battery, when the indicator on the jumper cable shines a steady green light, it means it's connected correctly. If red light is on and solid with beeping, it means it‘s reverse connection.
Q5: What should I do if this unit can’t start a vehicle?
Q6: What should I do if this unit can’t be charged?
Q7: What should I do if this unit can’t charge other devices?
Q8: How to turn off this unit ?
A: The unit will be turned off automatically in 30 seconds when it has no load.
Q9: Can this unit charge other devices while it is being charged?
A: Yes.
Q10: Can this unit charge other devices while starting a vehicle?
A: No.
Q11: How often does this unit need to recharge?
A: It would be best to be recharged every 3 months.
Q12: Why it shuts off in 30s when charging for other devices?
A: This product may not be able to charge for the devices that need weak current like iphone 6 series, headphone, smart watch,etc. Because this unit has a minimum load current (200mA). it will be automatically off after 30s if the load current is less than 200mA.
Warning
- Read this instruction manual carefully before using this unit.
- Use caution while using this unit. Injury to self, or damage to the unit or the vehicle battery if precautions are not followed.
- Do Not allow to use by persons who do not have proper knowledge or ability to operate the device without supervision.
- Do Not use as a toy. Keep the unit away from children to avoid accident.
- This unit is for 12V vehicles only, it may not be suitable for other vehicles. It is forbidden to use for other machines such as aircraft, boats, etc.
- Do Not use this unit if any cable, clamp, or cord is damaged or if the unit is overheated or swelled or leaking fluid.
- Do Not use in place of a vehicle battery or as a vehicle battery charger.
- Do Not use the unit to start a vehicle while charging the internal battery.
- Only use the jumper cable attached and use the correct and qualified charger to charge this unit.
- Do Not let this unit over-discharge (do not let the battery run to empty), please charge it regularly; it would be best to recharge it every 3 months.
- Make sure the blue plug of the jumper cable is plugged fully into the jumper socket; otherwise, the blue plug could melt.
- Make sure the battery terminal are clean before starting, and make sure the battery clamps are well connected. If the battery terminals on the vehicle are dirty or corroded, the output power of the unit will be lessened.
- Do Not start the vehicle continuously more than 4 times within 10minutes, if the vehicle can’t be started at one time, please wait at least 30seconds to restart it.
- Do Not connect the two clamps together.
- Do Not connect the jump starter’s clamps to the battery reversely while pressing the ”BOOST” button to avoid accident.
- Only use this unit to start the vehicle when the battery indicator is more than 2 bars.
- Do Not keep the unit connected to the vehicle battery after successfully starting the engine. Remove the product from the vehicle battery after starting the engine. If not, it could lead to damage.
- Do Not recharge this product immediately after using it to start the vehicle, please cool it down for 30 minutes before charging.
- Do Not allow the product to become wet and Do Not immerse in water.
- Do Not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Do Not modify or disassemble the unit. Only a repair technician may repair this unit.
- Do Not expose product to extreme heat or fire.
- Do Not drop or crush the unit. If the unit has received a sharp blow or is damaged in any other way, a qualified battery technician should check it.
- Do Not store in locations where the temperature may exceed 60ºC/ 140ºF.
- Charge only at ambient temperature between -10~45ºC / 14~113ºF.
- Under extreme conditions, the battery may leak. If a liquid is leaking from the unit, Do Not handle with bare hands. In case of skin contact wash with soap and water immediately. If the liquid contacts to eyes, rinse eyes with cold running water for at least 10 minutes and get medical treatment immediately.
- The unit contains the lithium-based batteries. At end of the product life, or if the unit is leaking liquid, dispose the unit according to local regulation.
Your Warranty Includes
-
18 Months Online After- Sales Service
Within 18 months, we will provide timely and effective online after- sales service after your purchase. -
30 Days Money Back Guarantee
Within the first 30 days after your purchase, you can apply return for it through Walmart when you have any issue. -
30 Days to 18 Months
We will replace the defective unit due to manufacturing issues with a new one within 18 months
Disclaimer
A. The warranty is valid upon presentation of the original receipt ( Order ID)
by the original purchaser with the product need to be repaired or replaced.
B. The warranty does not cover damage or product failure resulting from normal
wear and tear, physical abuse, improper installation, misuse, modification or
repairs by unauthorized third parties.
C. We are not liable for any incidental or consequential damage that arises
from incorrect use or misuse of this product.
D. All warranty claims are limited to repair or replacement of the defective
product and at the sole discretion of GOOLOO.
Attention
| Do Not Submerge In Water
---|---
| Do Not Disassemble
| Do Not Drop
| Avoid Extreme Temperatures
| Do Not Place Near or Into Fire
| |
---|---|---
Overcharge/ discharge
Protection| Fuse Protection| Against-reverse Plug
Customer Service
| 18 Months Limited Warranty Service
---|---
| Lifetime Technical Service
| Feel Free to Contact Us
karen@gooloo.com
| For FAQ and More Information
www.gooloo.com
| 1-888-886-1805
Mon.-Fri. PST 9:00a.m.-5:00p.m.
Thank You for Choosing
Documents / Resources
|
GOOLOO GE4500 Jump Starter 4500A Peak
Car
[pdf] User Manual
GE4500 Jump Starter 4500A Peak Car, GE4500, Jump Starter 4500A Peak Car,
Starter 4500A Peak Car, Peak Car
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>