BERG X1 Pro Neochrome Scooters Proxus Owner’s Manual

: June 6, 2024
: BERG

Table of Contents

BERG X1 Pro Neochrome Scooters Proxus
UNPACKING
INSTALLATION
USE MAINTAIN
User guidelines
Maintenance
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BERG X1 Pro Neochrome Scooters Proxus

Specifications

Model: PROXUS X1
Compression System: IHC Compression
Warranty: 3 years from the purchase date

Unpacking

Make sure you have received the following items:

1x Scooter
1x Manual
1x Warranty Information

Installation

Follow these steps to install your scooter:

Refer to the manual for detailed installation instructions.
Ensure all parts are securely attached.
Check the compression system if necessary.

How to Use and Maintain:

Important information on usage and maintenance:

Always use the scooter as intended and follow safety guidelines.
Supervise children when they are using the scooter.
Regularly clean the scooter with a damp cloth after each use. Avoid abrasive cleaning solutions.
Store the scooter in a dry and dust-free area when not in use.

This BERG will HI BERGER make you jump, ride and fly the outdoors. Feel confident, even when the road ahead is bumpy. Shred the streets, keep pushing and never ever give up! Feel at home, the moment you step outside. Because you know the sky is yours. And you are about to touch it.

Register your new BERG Pro Scooter, unlock free extras and become a true BERGER.

UNPACKING

$BERG-X1 Pro-Neochrome-Scooters-Proxus- $3$$

INSTALLATION

$BERG-X1 Pro-Neochrome-Scooters-Proxus- $4$$
$BERG-X1 Pro-Neochrome-Scooters-Proxus- $5$$

USE MAINTAIN

Warnings!

Maximum user weight 100 kg.
Wear personal protective equipment.
Adult supervision required.
It’s the parents decision to allow his or her child to ride this product. It’s also their responsibility to judge if the child’s maturity, skill and ability is suitable and safe to use this product.
Scooter riding can be a hazardous activity and it is possible to get into dangerous situations.

User guidelines

BERG or the dealer cannot be held responsible for improper use of this product. Read these guidelines before use to properly and safely use this product. BERG cannot be held responsible for any omissions in this manual.
safety

•Product must be installed by an adult.
Not suitable for children under 5 years old.
Obey all local traffic and scooter riding laws and regulations.
Watch out for pedestrians.
Remove all packaging before giving the product to your child.

User instructions

Keep these instructions for future reference.
Users must always inform themselves of the limits of use in accordance with road safety regulations.
Only use your BERG product as instructed below. Any unauthorized use could result in serious injuries to the user and/or the product.
Always wear safety equipment such as helmet, kneepads and elbowpads. Always wear a helmet when riding your scooter and keep the chinstrap securely buckled. Always wear shoes.

Before use

Ensure all locking devices are engaged. Ensure there are no broken components.
Check and secure all fasteners before every ride.
Turn the handelbar to the left and right to make sure it works properly and smoothly. Also check if the handlebar is fixed sturdily before riding the scooter.
Make sure the handlebar, brake and wheels are functioning correctly.
Replace worn or broken parts immediately.

During use

Ride on smooth, paved surfaces away from motor vehicles.
Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.
Avoid streets and surfaces with water, sand, gravel, dirt, leaves and other debris. Wet weather impairs traction, braking and visibility.
Practice foot positioning at slower speed untill you build skill and experience. Shifting your foot position, or lifting or placing your feet while travelling affects the stability of the scooter. You have to learn to maintain control while you move your feet on and off the deck
of the scooter.
The scooter should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
Ride at a suitable speed where you have control.

Braking

Always brake using the rear brake.
To brake, just step on the pedal at the end of the deck with your heel. The pedal should be touching the rear wheel to brake.
The brake will get hot from continuous use. Do not touch after braking.
Avoid excessive speed associated with downhill rides. The brake is not designed to decelerate from high downhill speeds.

Restrictions for use

Do not ride backwards at great speeds. Doing this could make you lose control.
Do not allow more than one person to ride the scooter at the same time.
Do not ride the scooter with only one hand. Keep two hands on the handlebars at all times.
Avoid contact with moving parts while riding the product.
Do not ride at night.

Accessories

Only use accessories approved by BERG and that are specifically developed for this product.
For correct use and installation of an accessory please refer to the accompanying manual.
All accessories should be assembled by an adult and supervised by an adult during use.

Maintenance

Some maintenance is necessary in order to use the BERG product and have fun with it for a long time. This chapter describes how, how often, and which maintenance must be carried out.

Maintenance scheme
See page 7, for explanatory images.

Daily

Handlebar (2)

Check it is still tightly connected to the deck.\

Wheels (3)

Check if the wheels rotate smoothly.
Clean bearings if necessary.

Brake (7)

Check if the brake still functions properly.

Weekly
Wheels (3 )

Check for wear.
Check if the axles are still tightly connected.

Handlebar (4)

Check if handlebar is wobbly/loose, tighten compression system if necessary. See image.

Deck (6)

Check griptape for wear.

Monthly
Handlebar (1)

Check handgrips for wear.

Deck (5)

Check for wear and tear.

Maintenance activities
Clean the scooter with a damp, soft cloth every time when you have finished using it. Never use abrasive or solvent-based cleaning solutions to clean the product. Store the product preferably in a dry and dust-free space.

Wheels

The wheels wear down with time and can be damaged if used frequently on rough surfaces. The rear wheel on which the brake is applied is particularly affected after several hours of braking. In the interest of safety, both wheels should be checked regularly and changed if necessary.
The wheels might not rotate smoothly anymore when the bearings are affected by sand, water or filthiness. Clean the bearings or replace them if necessary.
To change the wheels, remove the axle bolts with two allen keys and slide the wheels off its fork. Place the new wheels and use new bolts to tighten everything back in place. For the rear wheel, make sure the two spacer rings are still positioned correctly. Only 100mm or 110mm wheels can be used on the scooter.
Axles regularly need to be checked as vibration from use can loosen them.

Handlebar

If the handlebar is not fixed tightly, use an allen key to tighten the bolts inside the clamp properly. Use firm pressure but avoid overtightening.
To change the grips, the handlebar end caps need to be removed with force. Use hot water and/or soap to replace the grips. Insert new handlebar end caps inside the handlebar and push the handlebar against a hard surface to tighten the handlebar end cap.
When the handlebar feels wobbly/loose it is necessary to tighten the IHC compression system with an allen key. Remove the handlebar in order to do so. After tightening, the fork should still be able to spin freely, however if over tightened, movement can be restricted and the compression or headset can be damaged.

Warranty

Warranty period
We believe that quality is the basis for a great product. That is why BERG offers you a 3-year warranty from the date of purchase (receipt required) against manufacturing defects. We will repair or replace any BERG product that shows defects in material or workmanship free of charge. Please refer to the information below for the terms of this warranty.
The warranty only applies to the aluminum deck and steel steering tube. Other parts (brakes, wheels, handles, covers, etc.) are considered wear and tear components and are not covered by this warranty. Due to the foreseeable use of this product, we can of course provide you with spare parts for these wear components.

Warranty regulations
The owner of the product can only claim a warranty by presenting the original bill of the purchase. The warranty only applies to material and construction faults and with respect to this product or parts thereof. The warranty lapses if:

The product is incorrectly and/or carelessly used;
Use of the product is not in accordance with its purpose;
The product is not assembled and maintained in conformance with the user manual;
Technical repairs to the product are not carried out in a professional way;
Parts mounted afterwards do not meet technical specifications of the product involved or have not been mounted correctly;
Added parts or replaced parts are no official BERG spare parts or accessories;
Deficiencies arise as a result of climate influences, such as rust or normal weathering of the paint work;
The product has been used for rental purposes or in any other way made available to several unspecified persons.

Under no circumstances can BERG be held responsible for damage to the products (of parts thereof) as a result of replacement of parts not being carried out in time.
During the warranty period, all material and construction faults assessed by BERG will be repaired or replaced at the discretion of BERG.
The owner of the product can only lay claim under this warranty by returning to the company where the product was bought. Besides the complaint, take the product serial number and original purchase receipt with you. You can find the serial number on the deck of the product.
If the claim under the warranty is refused, all costs incurred must be paid by the owner.
The warranty is not transferable to third parties.

BERG
Stevinlaan 2
6716 WB Ede

The Netherlands