BERG 16.00.04.00 Baby Unisex Helmet Instructions
- June 2, 2024
- BERG
Table of Contents
BERG 16.00.04.00 Baby Unisex Helmet
This BERG will make you jump, ride and fly outdoors. With fresh air in your hair and this BERG at your side, you feel strong wherever you fly. Feel confident, even when the road ahead is bumpy. Feel at home, the moment you step outside. Because you know the sky is yours. And you are about to touch it.
Article number/ Size / Color
- 16.00.04.00 S Black
- 16.00.17.00 M Black
- 16.00.22.00 L Black
Warnings
- This helmet should not be used by children while climbing or doing other activities when there is a risk of strangulation/hanging if the child gets trapped with the helmet.
- The helmet can only protect if it fits well. Try different sizes and choose the size which feels secure and comfortable on the head. Please refer to the size chart in the manual to choose the right size helmet.
- A helmet cannot always protect against injury.
- Discard and destroy the helmet if it is subjected to a severe impact.
- Do not modify or remove any of the original parts of the helmet other than those recommended by BERG. Do not adopt the helmet for fitting accessories. This could lead to bad fitting of the helmet and dangerous situations.
User instructions
- Always check the helmet for wear or damage before each use.
- Adjust the helmet to fit the user, and position the straps so that they do not cover the ears. Position the buckle away from the jawbone.
- The helmet should be positioned on the head to ensure the intended protection is provided (e.g. it should be placed to protect the forehead and not to be pushed too far over the back of the head).
- Avoid harsh sunscreens, hair- and skin products on the head while wearing the helmet.
Storage and Maintenance
- After each use, allow the helmet to air dry and then store in a cool, dry place.
- Never leave the helmet in your car or anywhere near direct or indirect heat.
- When used and stored in a correct way the protectors will guarantee protection for 2 years. The warranty only applies to material and construction faults and concerning this product or parts thereof. Parts that are liable to wear and tear are excluded from warranty.
- It’s recommended to replace the helmet every 3 to 5 years from the date of purchase.
- It’s recommended to clean the helmet with mild soap, water and with a soft cloth or sponge.
Plastic parts, buckle, straps and padding
- Must be checked regularly for wear, damage and breakage.
- In the case of breakage, do not use the helmet but immediately replace the part concerned with an original part, in order to guarantee the safety of the user.
Shell
- The inner and outer shell must be checked regularly for damage and breakage.
- In the case of breakage, do not use the helmet but immediately discard it and replace with a new one, in order to guarantee the safety of the user.
Specifications
Model No. 16.00.04.00 & 16.00.17.00 & 16.00.22.00 Complies with
EN1078:2012+A1:2012 Helmet for pedal cyclists.
Materials
ABS, EPS, polyester, nylon
Manufacturer
BERG Toys B.V. Stevinlaan 2 6716 WB Ede – The Netherlands
Certified by
Telefication B.V. Wilmersdorf 50, 7327 AC Apeldoorn, Netherlands. NB No. 0560
ITS Testing Services UK Ltd Centre Court, Meridian Business Park, Leicester,
LE19 1WD, United Kingdom Approved Body AB0362
Regulatory information
This helmet is in conformity with regulation Personal Protective Equipment Regulation EU 2016/425 & regulation 2016/425 on personal protective equipment, as amended to apply in GB. The EU & UK declaration of conformity can be accessed from the following link: https://www.bergtoys.com/media/wysiwyg/products/ce/helmet-s.pdf https://www.bergtoys.com/media/wysiwyg/products/ce/helmet-m.pdf https://www.bergtoys.com/media/wysiwyg/products/ce/helmet-l.pdf
WARNING
Keep the user manual for future reference23
Specifications
- Model Numbers: 16.00.04.00, 16.00.17.00, 16.00.22.00
- Compliance: EN1078:2012+A1:2012 Helmet for pedal cyclists
- Materials: ABS, EPS, polyester, nylon
- Manufacturer: BERG Toys B.V.
- Manufacturer Address: Stevinlaan 2, 6716 WB Ede, The Netherlands
Frequently Asked Questions (FAQ)
Q: How should I clean my helmet?
A: Use a mild soap and water solution to clean the outer shell and padding
of the helmet. Avoid using harsh chemicals that may damage the materials.
Q: Can I customize my helmet with stickers or paint?
A: It is not recommended to alter the helmet’s surface with stickers or
paint as this can affect the integrity of the materials and compromise safety.
Q: How often should I replace my helmet?
A: Helmets should be replaced every 5 years or immediately after a
significant impact or accident, even if no visible damage is present.