CREDENCE ID M-ECO Reliable Biometric Verification Device User Manual
- June 3, 2024
- CREDENCE ID
Table of Contents
ID M-ECO
Reliable Biometric Verification Device
User Manual
V 2.0
M-ECO Reliable Biometric Verification Device
M-ECO is an economical next generation biometric and credential reading
identity platform that places the power of mobile authentication into the
hands of users in the most demanding environments.
This rugged platform features a 5.5-inch display, a 2.0GHz quad-core Single
Board Computer (SBC) with 4GB-RAM/16GB-eMMC and a stronger mechanical
enclosure that all work together to achieve MIL-STD-810H (formerly 810G)
United States Military Standard. M-ECO’s FAP-20 fingerprint sensor, dual
interface smartcard reader and 5MP optical camera seamlessly support all
enrollment and verification applications.
Technical Specification
High Performance computational system| – Mediatek Helio A22
MT6761 SoC Quad Core A53 @2.0GHz
---|---
OPEN yet Secure Operating System and Multi-Application Architecture| –
Google Certified Android Operating System (Android 11),
– Java SDK for biometric and credential (SmartCard) functionality
– Over-The-Air (OTA) updates for OS and SDK
High-Speed and Secure Memory| – Onboard storage: 16GB eMMC
– External SD Card slot: up to 128 GB SD Card (purchased separately) supported
– RAM: 4GB LPDDR4
Multiple Connectivity| – Wi-Fi: 8.11a/b/g/n/ac 2.4 + 5GHz
– Bluetooth: 5.0 BR/EDR/LE (Compatible with Bluetooth 1.x, 2.x, 3.x & 4.0)
– 3G-WCDMA: B1/2100;B2/1900;B5/850;B8/900
– 3G: TD/SCDMA:B34/B39
– LTE:
o USA: B2, B4, B5, B13, B17
o EU: B1, B3, B20
o Africa/South East Asia : B1, B2, B5, B8, B19.
– Dual SIM
– GPS: Standalone multi-GNSS engine with active antenna
Touchscreen Display| – Size: 5.5-inch diagonal
– Resolution: 720×1280 Pixels
– Type: Capacitive multi-touch panel
Integrated enrollment grade FAP 20 FBI and FIPS 201 PIV certified
fingerprint sensor| – Type: Thermal-Capacitive
– DPI: min 500dpi
– Classification: FAP 20
– Certification: FBI and FIPS 201 PIV
Contact and Contactless Smart Card Reader| Contactless Interface:
– Read/write mode supporting ISO/IEC 14443A/B MIFARE
– Read/write mode supporting MIFARE Contact Interface:
– Acceptor: Friction
– Insert/remove cycles: 100,000
– Cards supported: ISO 7816 T=0, T=1
Integrated Camera| – Resolution: 5 Megapixel (optional upgrade to 13
Megapixel)
– Autofocus: Continuous focus and Touch-to-focus
– Flash: LED
Easy to Expand| – USB-C port with USB-On-The-Go (USB-OTG) support.
Fast Charge and Full Day Battery Life| – 6,400 mAh Li-Ion battery
(largest in its class)
– Fast charging with Certified worldwide fast charger included
Environmental conditions| – Working Termp.: -15℃~50℃
– Working Voltage: 5V~9V
– IP Rating: IP65
– Shock resistance: MIL-STD-810H (formerly 810G) compliant
M-ECO at a glance
| 
---|---
Setting Up M-ECO
Basic M-ECO operation
To turn on M-ECO: Press and hold power button on the right side of M-ECO
for two seconds. After a few seconds, the display will turn on. Your battery
may require an initial charge. If so, plug the supplied USB
cable into the power port on M-ECO’s bottom side and the charger into a wall
outlet.|
---|---
To turn off M-ECO: Press and hold the power button on the device’s right
side and then select the action you want to take- Power Off, Reboot, Sleep.|
To charge M-ECO: Plug the supplied USB cable into the power port on M-ECO
bottom side and the charger into a wall outlet.|
To install SIM & SD Cards: To pop open the SIM tray, insert a paper clip
or a SIM-eject tool into the hole beside the tray. Push in, towards the
M-ECO. Place the new SIM card into the tray—it will fit only one way, because
of the notch. Then insert the tray into the device completely and in the same
orientation that you removed it. The tray also fits only one way.|
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Shielded cables must be used with this unit to ensure compliance with the
Class B FCC limits.
Specific Absorption Rate (SAR) information
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This
model (FCC ID: 2AMBZ-CE1-16-4G-11) has also been tested against this SAR
limited. The highest SAR value reported under this standard during product
certification for use at the ear is 0.42 W/kg and body is 1.28 W/kg.
The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly.
The device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>