void Arclite 15 Inch 3 Way Arrayable Point Source Loudspeaker 1000W User Guide

: June 6, 2024
: VOID

Table of Contents

void Arclite 15 Inch 3 Way Arrayable Point Source Loudspeaker 1000W
Safety and Regulations
Unpacking and Checking
About
Cable and Wiring
Mounting
Service
Appendix
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

void Arclite 15 Inch 3 Way Arrayable Point Source Loudspeaker 1000W

Specifications

Product Name: Arclite
Designed for: Touring
Manufacturer: Void Acoustics Research Ltd.
Trademark: Void Acoustics
Version: 1.0

Important Safety Instructions
Follow all safety instructions provided in the manual to prevent electric shock or other hazards.

EC Declaration of Conformity
Refer to the online EC Declaration of Conformity for compliance] information.

UK CA Marking
For details on UKCA marking, visit the provided link.

Warranty Statement
Read the warranty statement before using the product.

WEEE Directive
Recycle components when disposing of the product to conserve natural resources.

Unpacking and Checking
Ensure the product is in good condition upon delivery. Keep original packaging for potential returns or servicing.

About Arclite Welcome
Welcome to the Arclite user guide.

©2023 Void Acoustics Research Ltd.
This user guide is subject to change without notice.
For the latest online version, visit: www.voidacoustics.com
Void Acoustics and the Void logo are registered trademarks of Void Acoustics Research Ltd. in the United Kingdom, USA and other countries; all other Void trademarks are the property of Void Acoustics Research Ltd.

Safety and Regulations

Important safety instructions
The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Safety instructions – read this first

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat source such as radiators, heat registers, stoves, or other such apparatus that produce heat.
Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect power cords from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit the apparatus.
Only use attachments and accessories specified by Void Acoustics.
Only use with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Since the mains power supply cord attachment plug is used to disconnect the device, the plug should always be easily accessible.
Void loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage. Avoid prolonged exposure to the high sound levels from the loudspeaker.

Limitations
This guide is provided to help familiarise the user with the loudspeaker system and its accessories. It is not intended to provide comprehensive electrical, fire, mechanical and noise training and is not a substitute for industry-approved training. Nor does this guide absolve the user of their obligation to comply with all relevant safety legislation and codes of practice. While every care has been taken in creating this guide, safety is user-dependent and Void Acoustics Research Ltd cannot guarantee complete safety whenever the system is rigged and operated.

EC declaration of conformity
For EC Declaration of Conformity please go to: www.voidacoustics.com/eu- declaration-loudspeakers

UKCA marking
For details of the UKCA marking go to: www.voidacoustics.com/uk-declaration- loudspeakers

Warranty statement
For warranty statement go to: https://voidacoustics.com/terms-conditions/

WEEE directive
If the time arises to throw away your product, please recycle all the components possible.

This symbol indicates that when the end-user wishes to discard this product, it must be sent to separate collection facilities for recovery and recycling. By separating this product from other household-type waste, the volume of waste sent to incinerators or land-fills will be reduced and natural resources will thus be conserved.

The Waste Electrical and Electronic Equipment Directive (WEEE Directive) aims to minimise the impact of electrical and electronic goods on the environment. Void Acoustics Research Ltd complies with the Directive 2002/96/EC and 2003/108/EC of the European Parliament on waste electrical finance the cost of treatment and recovery of electronic equipment (WEEE) in order to reduce the amount of WEEE that is being disposed of in land-fill sites. All of our products are marked with the WEEE symbol; this indicates that this product must NOT be disposed of with other waste. Instead it is the user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved reprocessor, or by returning it to Void Acoustics Research Ltd for reprocessing. For more information about where you can send your waste equipment for recycling, please contact Void Acoustics Research Ltd or one of your local distributors.

Unpacking and Checking

All Void Acoustics products are carefully manufactured and thoroughly tested before being despatched. Your dealer will ensure that your Void products are in pristine condition before being forwarded to you but mistakes and accidents can happen.
Before signing for your delivery:

Inspect your shipment for any signs of contamination, abuse or transit damage as soon as you receive it
Check your Void Acoustics delivery fully against your order
If your shipment is incomplete or any of its contents are found to be damaged; inform the shipping company and inform your dealer.

When you are removing your Arclite loudspeaker from its original packaging:

Arclite loudspeakers come packaged in a lid and base carton that has a protective sleeve around it; avoid using sharp implements to remove the cardboard to protect the finish
If you need to place the loudspeaker on a flat surface make sure it is free from debris
When you have removed the Arclite loudspeaker from the packaging inspect it to ensure there is no damage and keep all original packaging in case it needs to be returned for any reason. See section 1 for warranty conditions and see section 7 if your product needs servicing.

About

Welcome
Many thanks for purchasing this Void Acoustics Arcline Series loudspeaker. We truly appreciate your support. At Void, we design, manufacture and distribute advanced professional audio systems for the installed and live sound market sectors. Like all Void products, our highly skilled and experienced engineers have successfully combined pioneering technologies with groundbreaking design aesthetics, to bring you superior sound quality and visual innovation. In buying this product, you are now part of the Void family and we hope using it brings you years of satisfaction. This guide will help you both use this product safely and ensure it performs to its full capability.

Arclite overview
Designed for pairing with Arcline 218 and 118 subwoofers, Arclite operates as a two-way active, three-way arrayable point source loudspeaker. Offering scalability with maximum output and coherence, to deliver a true point source alternative to the Arcline 8.
Tailored for audio integrators and sound engineers with a focus on touring, Arclite guarantees predictable behaviour even in the most demanding applications. An arrays dispersion and sound pressure levels can be configured precisely to best serve any demands. Arclite’s design also offers summation up to 20 kHz with minimal destructive interference.
Dual NL4 speakON™ connectors with link out and minimal rigging requirements for ground stacked deployments allows for very fast set-up times.

Key features

Two-way active, three-way arrayable point source
Ground stack or flying configurations available
Asymmetrical combination waveguide and horn optimised with FEA
Dual NL4 speakON™ connector with link out for quick and easy set up
Arrayable in vertical and horizontal configurations
Blanking plate for use without rigging

Arclite specifications

Frequency response	45 Hz – 18 kHz ±3 dB
Efficiency1	MHF: 113 dB 1 W / 1 m

LF: 98 dB 1 W / 1 m

1 Measured in half space 2 AES2 – 1984 compliant 3 Calculated

Arclite dimensions

Cable and Wiring

Electrical safety
To avoid electrical hazards please note the following:

Do not access the inside of any electrical equipment. Refer servicing to Void-approved service agents.

Cable considerations for fixed installations
We recommend specifying installation-grade Low Smoke Zero Halogen (LSZH) cables for permanent installations. The cables should use Oxygen Free Copper (OFC) of grade
C11000 or above. Cables for permanent installations should be compliant with the following standards:

IEC 60332.1 Fire retardancy of a single cable
IEC 60332.3C Fire retardancy of bunched cables
IEC 60754.1 Amount of Halogen Gas Emissions
IEC 60754.2 Degree of acidity of released gases
IEC 61034.2 Measurement of smoke density.

We suggest using the following maximum copper cable lengths to keep level losses below 0.6 dB.

Metric mm2	Imperial AWG	8 W load	4 W load	2 W load
2.50 mm2	13 AWG	36 m	18 m	9 m
4.00 mm2	11 AWG	60 m	30 m	15 m

Arclite wiring diagram

Bias D1/Q1/Q1.5/Q2 phoenix wiring

Bias D1/Q2	Output 1	Output 2

Output	LF (15”)	MHF (4”+2.5”)
Max parallel units	4 (2 W load to amplifier)*	8 (2 W load to amplifier)*

Recommended max parallel units 2 (4 Ω load to amplifier) due to the power rating of the amplifier.

Bias Q3/Q5 speakONTM wiring

Bias Q3/Q5	Output 1	Output 2
Output	LF (15”)	MHF (4”+2.5”)
Max quantity per channel	2 (4 W load to amplifier)	4 (4 W load to amplifier)

Mounting

Installation safety
To avoid mechanical hazards, please note the following:

Safety regulations vary in different regions. Full compliance with those regulations must be your priority
Installations must only be undertaken by fully qualified and experienced engineers/technicians who understand local regulations
This may include consulting a structural engineer before installation of wall brackets
Remember that all personnel have a duty of care to themselves, to their assistants, to the venue staff and to the public
Before lifting any part of the system above head height, check the whole rig for loose tools or other items that may fall and cause injury
Do not use a telephone (even if hands-free) whilst installing. Always concentrate fully on the installation operation
Do not install equipment that is worn, damaged, corroded, mishandled or overstressed in any way
Use only Void-approved mounting equipment and accessories
Secondary safeties should be provided in all instances where cabinets are flying or fixing overhead and should conform to local regulations

Horizontal Array
Parts required:
IT4310 – Arclite – Vertical Fly Bar Assembly – Black (recommended load no more than 90KG)
IT4165 – Arclite – Top and Bottom Rigging Assy – Black

Step 1:
Remove all four M6 bolts from the top or bottom infill panels.
Step 2:
Remove the infill panel and save it for future use
Step 3:
Fix the rigging assembly into place using all fourteen M6 bolts provided.
Step 4:
Place two Arclite together as shown and remove both quick release pins from the rigging assembly
Step 5:
Rotate the links into position as shown.
Step 6:
Reinsert the pins into the rigging assembly of the neighbouring cabinet through the links to fix the top rigging assemblies together.
Step 7:
Place the bracket into position as shown and fix with all four pins provided.
Step 8:
Remove the ‘R’ clip from the rear link assembly.
Step 9:
Remove the pin
Step 10:
Rotate the relink into position so the holes align
Step 11:
Reinsert the pin and ‘R’ clip so that the cabinets are linked together
Step 12:
Remove both quick release pins from the rigging assembly.
Step 13:
Rotate the links into position as shown.
Step 14:
Reinsert the pins into the rigging assembly of the neighbouring cabinet through the links to fix the top rigging assemblies together.

Service

Void Arcline loudspeakers should only be serviced by a fully-trained technician.
No user serviceable parts inside. Refer servicing to your dealer.

Return authorisation
Before returning your faulty product for repair, please remember to get an R.A.N. (Return Authorisation Number) from the Void dealer who supplied the system to you. Your dealer will handle the necessary paperwork and repair. Failure to go through this return authorisation procedure could delay the repair of your product.
Note that your dealer will need to see a copy of your sales receipt as proof of purchase so please have this to hand when applying for return authorisation.

Shipping and packing considerations

When sending a Void Arcline loudspeaker to an authorised service centre, please write a detailed description of the fault and list any other equipment used in conjunction with the faulty product.
Accessories will not be required. Do not send the instruction manual, cables or any other hardware unless your dealer asks you to.
Pack your unit in the original factory packaging if possible. Include a note of the fault description with the product. Do not send it separately.
Ensure safe transportation of your unit to the authorised service centre.

Appendix

Architectural specification
The loudspeaker shall be a two-way active, three-way arrayable point source, featuring an asymmetrical combination waveguide and horn, consisting of one high power reflex loaded 15” (381 mm) low frequency (LF) transducer, with a two way, mid-high (MHF) coaxial ring radiator compression driver.
The low frequency transducer shall be constructed on a rigid metal frame, featuring a 4”
(101 mm) voice coil, wound with copper wire on a high-quality voice coil former, for high power handling and long-term reliability. The high frequency coaxial ring radiator shall project its sound through a high precision proprietary waveguide with asymmetrical horn mouth.

Performance specifications for a typical production unit shall be as follows: the usable on-axis bandwidth shall be 45 Hz to 18 kHz (±3 dB) for a single enclosure; shall average 35° directivity pattern on the horizontal axis and 60° on the vertical one (25° up – 35° down)
(-6 dB down from on-axis level) from 1 kHz to 12 kHz.; maximum SPL of 139 dB peak measured at 1 m using IEC268-5 1/3 Oct pink noise. Power handling shall be 1000 W AES for the LF section at a rated impedance of 8 Ω and 190 W AES for the HF section at a rated impedance of 16 Ω. The wiring connection shall be via two Neutrik speakON™. One for input and one for loop-out to another speaker, to allow for pre-wiring of the connector before installation.
The enclosure shall be constructed from 15 mm multi laminate birch plywood, finished in a textured polyurea and shall contain fixing points so that rigging can be attached to array multiple units in horizontal or vertical configurations. External dimensions shall be (H) 793 mm x (W) 510 mm x (D) 559mm (31.3” x 20.1” x 22”) . The weight shall be 44 kg (97lbs).
The loudspeaker shall be a Void Acoustics Arclite.

NORTH AMERICA