pulsar 4K Hz Wireless Mouse Dongle Instructions

pulsar 4K Hz Wireless Mouse Dongle

Product Information

Specifications

• Maximum Dongle Distance for Stable Performance: 50cm
• USB Compatibility: USB 3.0

Product Usage Instructions

Dongle Pairing
Position the dongle within 50cm of the mouse, ensuring no obstacles are in between.

Dongle LED ON/OFF
To turn the LED on/off, press and hold the specified buttons for the indicated duration depending on the language setting.

Debounce Time Setting
To adjust the Debounce Time, follow the steps provided based on your language setting.

DPI Setting
Adjust the DPI setting by pressing the DPI button as per the steps provided for your language.

Polling Rate Setting
Set the Polling Rate by following the steps mentioned for your language setting.

LOD (Lift off Distance) Setting
Configure the LOD setting using the steps outlined for your language.

Motion Sync Setting
Adjust the Motion Sync setting by following the instructions provided for your language.

FAQ

• How do I replace the side buttons?
  Refer to the user manual for detailed instructions on replacing the side buttons.

• Where can I find information on battery removal for recycling?
  Please visit our website for instructions on battery removal and recycling.

• Where can I find more information on warranty?
  For further details on warranty, visit www.pulsar.gg/warranty

• How can I get help with my product?
  If you have any questions or need assistance with your product, please contact us at Pulsar for support.

Instructions

• A USB-C Port
• B Left Mouse Button
• C Right Mouse Button
• D Scroll Wheel
• E Forward Button
• F Back Button
• G LED Indicator
• H PTFE Skates
• I Power On/Off Switch
• J DPI Button
• K Optical Sensor
• L Polling Rate Button

Intel® Core TM i5 or Higher CPU
Requirement: AMD Ryzen™ 5 or Higher CPU
USB 3.0 or higher Port

LED INDICATOR

WIRELESS

RED BLINKING
[ENG] Low Battery-Battery level below 30%
YELLOW BLINKING
[ENG] Yellow Blinking – Mouse Pairing Mode

WIRED

• STEADY RED
  Charging

• STEADY BLUE
  Fully charged

Before Pairing Dongle

Maximum Dongle Distance for Stable Performance
Position the dongle within 50cm of the mouse, ensuring there are no obstacles in between.

Dongle Pairing Mode

Press and hold the buttons as shown in the image for 3 to 4 seconds; the LED indicator will then blink in a yellow color.

Dongle LED ON/OFF

Press and hold buttons 1, 2, and 3 for 5 seconds to adjust LED On/Off.

Debounce Time Setting

1. Hold the Polling rate button and click the DPI button to switch Debounce Time. At this time, OLED will only display the current set value, other set values will be hidden.
2. After the setting is complete, wait 1 second, OLED will display the current overall setting value
3. Wait another 3 second and the OLED will turn off

Debounce Time Setting – Step Levels

DPI Setting

1. Press the DPI button to activate the OLED display. The OLED screen will show the current configuration.
2. Press the switch again to adjust the DPI setting. The OLED screen will now exclusively display the DPI value, hiding other settings.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 3 seconds, and the OLED screen will automatically turn off.

DPI Setting – Step Levels

The DPI setting cycle in both direction.

Polling Rate Setting

1. Press the “Polling Rate” button to activate the OLED display. The OLED screen will show the current configuration.
2. Press the button again to adjust the polling rate setting. The OLED screen will now exclusively display the polling rate value, hiding other settings.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 3 seconds, and the OLED screen will automatically turn off.

Pollling Rate – Step Levels

The polling rate settings cycle back and forth.

LOD (Lift off Distance) Setting

1. Press the “Polling Rate” button to activate the OLED display. The OLED screen will show the current configuration.
2. While holding down the “Polling Rate Button,” adjust the LOD height value by pressing the right mouse button. During this process, the OLED screen will exclusively display the current LOD setting, concealing other settings.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 3 seconds, and the OLED screen will automatically turn off.

LOD (Lift-Off Distance) – Step Levels

Motion Sync Setting

1. Press the “Polling Rate” button to activate the OLED display. The OLED screen will show the current configuration.
2. To enable or disable “Motion Sync,” hold down the Polling Rate Button and press the left mouse button. The OLED will display only the current setting value, hiding others.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 3 seconds, and the OLED screen will automatically turn off.

Motion Sync – Step Levels

How to replace side buttons

2 WARR WARRANTY

Please visit our website for further information on warranty. www.pulsar.gg/warranty

Removal Instruction for Battery Recycling
Instruction de retrait pour le recyclage de la batterie

WASTE ELECTRICAL AND ELECTRONICS EQUIPMENT INFORMATION.
(WEEE) Correct Disposal of This Product. This marking shown in this product should not be disposed of with other household wastes. To prevent possible harm to the environment or human health, please separate this from other types of waste and recycle it responsibly. Household users should contact either the retailer where they purchase this product or their local government office, for details of recycling. Business users should contact the supplier. This product should not be mixed with other commercial waste for disposal.

BATTERY WARNING
Improperly replaced batteries may present a risk of leak or explosion and personal injury. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54° C (130°F). Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not short circuit. Battery life varies with usage. Keep batteries away from children.

NEED ANY HELP?
Thanks for choosing Pulsar.
If you have any questions or comments, if you need any help with your products, please do not hesitate to contact us.
www.pulsar.gg/support
Global: www.pulsar.gg/support
support@pulsargg.kr
support@pulsargg.jp

References

• Support : pulsar gaming gears
• warranty information – Pulsar Gaming Gears

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>