PROAIM BMP60 R Pro Long Blimp Microphone Windscreen Instruction Manual
- June 5, 2024
- PROAIM
Table of Contents
PROAIM BMP60 R Pro Long Blimp Microphone Windscreen
Assembly Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Blimp Assembly
-
Loosen & tighten the ratchet knob to adjust the blimp handle as per your requirement.
-
Next, rotate and open the end cap.
-
Open the locking clips at both the ends of the blimp cage and slide out the mic holder rod.
-
Insert different holder clamps in the insertion slots to use other mics with different diameters.
-
Insert Mic into the suspension system and connect it to a connector cable. Then, re-attach the blimp cage.
-
While using the blimp extension, attach the extension to the blimp and close the blimp windscreen with the end cap.
-
Once the end cap is attached to the blimp windscreen, you can cover it using the fur cover.
NOTE: The fur cover serves the purpose of further minimizing the noise. You can use 60cm or 40cm fur cover depending on whether the blimp is with or without the extension.
YOUR PROAIM BMP60 R PRO LONG BLIMP MICROPHONE WINDSCREEN ALL DRESSED UP
AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of
purchase. Within this period of time, we will repair it without charge for
labor or parts. Warranty doesn’t cover transportation costs nor does it cover
a product subjected to misuse or accidental damage. Warranty repairs are
subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>