pixio PX277 PRO 27in IPS WQHD 165Hz Gaming Monitor User Manual

pixio PX277 PRO 27in IPS WQHD 165Hz Gaming Monitor

Before Using the Product.

Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Make sure to allow some space. Do not install near heater or any other high temperature product or humidifier.

• Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight for an extended period of time.
• Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging material will be the best method for successful delivery.
• Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents to clean the monitor. They may result in permanent damage to the panel and will void the warranty.
• Always check to make sure the power cord is unplugged before cleaning the monitor.
• Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components in the monitor.
• Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.
• Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries. When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider for best results.
• The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up. Avoid confined spaces like a bookcase for proper functionality.
• If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk of damage from lighting strikes or other abnormal voltage incidents.
• Do not overburden any socket to prevent risk of fire or shock.
• Do not stick any foreign objects into the monitor to prevent risk of fire or shock.
• Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the warranty as well. Contract Pixio directly for all RMA issues.
• Take note of elevation and temperature zone warnings on the adapters.
• The icon indicates that the adapter is suited for areas under 2000 meters.
• The icon indicates that the adapter is suited for non-tropical areas.

Cleaning the Product.

Take the following steps when cleaning.

1. Power off the product and computer.
2. Disconnect the power cord from the product. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.
3. Wipe the monitor with a clean, soft and dry cloth. Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor. Do not spray water or detergent directly on the product.
4.  Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5. Connect the power cord to the product when cleaning is finished.
6. Power on the product and computer.

Preperation.

Product Includes:

Product Assembly:

1. open the package, assemble the stand base to the stand stem with 3 pieces of M4*16mm screws. Screw as shown in the illustration.
2. Take out the product with foam still attached, and gently place it on a desktop or table. And insert the stand stem into the back of the monitor as shown in the illustration.
3. Stand assembly completed.

Dimension & Weight.

Monitor Inputs.

1. LAN
2. USB2
3. USB1
4. USB-B

1. DC
2. USB Firmware Update
3. HDMI HDMI 2.0, 144Hz, FreeSync Premium, HDR
4. DP DisplayPort 1.2, 165Hz, FreeSync Premium, HDR
5. Type C 165Hz, 65W Power Charge, FreeSync Premium
6. AUDIO OUT

Control Panel.

Menu Short Cut

Main OSD Navigation

How to Reconfigure

BACK

Right|

Move right on the OSD Menu / Enter

MOVE

Enter|

Press button to select

Press| Turn ON / OFF the OSD Menu

OSD Menu.

Display

• Brightness: Adjust the display brightness value from 0 to 100.
• Contrast: Adjust the display contrast value from 0 to 100.
• Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
• Preset: Select Preset from Standard, User, Movie, Photo, RTS, FPS1, and FPS2.
• Aspect Ratio: Select Aspect Ratio from Full, 16:9, and 4:3 [disabled when turn on the FreeSync]
• Sharpness: Adjust the Sharpness value from 0 to 100.

Color

• Color Temperature: Select Color Temperature from Warm, Normal, Cool, sRGB, and User.
• Gamma: Select Gamma from Off, 1.8, 2.0, 2.2, and 2.4.
• Hue: Adjust the Hue value from 0 to 100.
• Saturation: Adjust the Saturation value from 0 to 100.
• Low Blue Light: Adjust the Blue Light Filter value from 0 to 100.

Gaming Setup

•  FreeSync Premium: Turn FreeSync On or Off.
• Overdrive: Select Overdrive from Off, Low, Middle, and High.
• Game Plus: Select Game Plus from Time, Crosshair(LoS),
•  HDR: Turn HDR On or Off.
• DCR: Turn DCR On or Off.
• MPRT: Turn MPRT On or Off.
• RGB Light: Turn RGB Light On or Off.

Input

• Switch the signal input to Auto Select, Type C, DP [1.2], or HDMI [2.0].

System Setup

• Language: Change the OSD menu display language
•  OSD Setup: Select OSD Setup from H Position, V Position, OSD Timeout, Transparency.
  • H Position: Adjust 0-100
  • V-Position: Adjust 0-100 OSD
  • Timeout: Adjust 15-60
  • Transparency: Adjust 0-100
• Audio: Select Audio from Volume or Mute.
  • Mute: turn On or Off
  • Volume: Adjust 0-100
• KVM: Select KVM from Off, USB UP or Type C
• Reset: Select Reset from Cancel or Confirm.
• Firmware Update: Firmware Update from Cancel or Confirm.

User Data

• User Data: Load/Save Brightness, Contrast, Black Equalizer, Saturation, Preset, Color Temperature, Gamma, Overdrive, Volume, Mute, Low blue light settings on the monitor.

What is a KVM Switch?

A KVM switch allows a user to use one keyboard and mouse to control multiple PC setups. It is not limited to peripherals like mice or keyboards; you may also use them for USB flash drives for storage or other USB devices as well.

How do I set it up?

Let’s assume you have two monitors and two PC’s but you only want to use one keyboard and mouse for both setups. This is a perfect use-case for a KVM switch. Here are the steps to set up for this example. You will need almost everything plugged into your primary monitor. This will be the monitor where you will have your peripherals plugged into as well as for switching which PC you want to control.

Select a connection method suitable for each of your source device

1. Connect Monitor 1 to PC 1 with a USB-B to USB-A Cable.*
2. Connect Monitor 1 to PC 2 with a USB-C to USB-C cable or a USB-C to USB-A cable.
3. Connect your keyboard and mouse to USB1 and USB2 on Monitor 1.

To Use

What if I have two PC’s plugged into one monitor?

You can actually have one monitor with one keyboard and mouse connected to it and have that control two separate PC setups. However, you will have to switch the display input on your monitor from DisplayPort to HDMI or vice versa on top of changing the KVM input from USB-UP to Type C. Just keep in mind which PC and monitor is connected to which KVM input (Type C or USB UP}.

Things to note

• Type C will be disabled as a display input when the KVM switch is in use
• The KVM switch is only active on one input (USB UP or TYPE C} at a time
• If USB1 or USB2 are used for flash drives, do not switch KVM inputs while files are being transferred as this can corrupt files and destroy data
• If you are using the Ethernet port on Monitor 1 to connect to the internet, only one device will be connected to the internet at any given time

Adaptive-Sync. (AMD FreeSync or Nvidia G-Sync.)

FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and compatibility with the AMD graphics card.
Nvidia G-Sync
If you are using Nvidia GTX 10series or RTX20series graphic cards, you can use Adaptive-Sync (FreeSync) function. This requires Nvidia’s latest GPU updates. Please download and latest update if you are intend to use Adaptive-Sync (FreeSync) over your Nvidia GTX graphics cards. FYI, How to enable FreeSync on Nvidia GPU.

1.  Right-click on the Windows desktop and select Nvidia Control Panel
2.  Expand the Display section of the left-hand navigation pane and select Set up G-Sync
3. Check the “Enable G-Sync, G-Sync Compatible” box and select the Active Sync display you’d like to use if you have more than one monitor
4. Check the “Enable settings for the selected display model” box
5. Click “Apply” in the bottom-right

If the above isn’t available, or isn’t working, you may need to go to Manage 3D Settings, click the Global tab, scroll down to Monitor Technology, select G-SYNC Compatible in the drop-down, and then click ApplyEven though AMD Radeon GPUs and some FreeSync monitors support Adaptive Sync over HDMI, Nvidia says you’ll need to connect your GeForce GPU to your FreeSync monitor using a DisplayPort cable to activate variable refresh rates.(G-Sync monitors only work over DisplayPort as well.) Update.

References

• Official Pixio Store - Best Performance Gaming Monitors
• Support2 – Pixio Japan
• Pixio Gaming
• Reddit - Dive into anything

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>