Pixio PXC325 Curved Gaming Monitor User Manual
- June 5, 2024
- Pixio
Table of Contents
Pixio PXC325 Curved Gaming Monitor
Before Using the Product
Installation Space
Ensure some space around the product for ventilation. An internal temperature
rise may cause fire and damage the product. Make sure to allow some space. Do
not install near heater or any other high temperature product or humidifier.
- Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight for an extended period of time.
- Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging material will be the best method for successful delivery.
- Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents to clean the monitor. They may result in permanent damage to the panel and will void the warranty.
- Always check to make sure the power cord is unplugged before cleaning the monitor.
- Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components in the monitor.
- Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.
- Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries. When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging
- for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider for best results.
- The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up. Avoid confined spaces like a bookcase for proper functionality.
- If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk of damage from lighting strikes or other abnormal voltage incidents.
- Do not overburden any socket to prevent risk of fire or shock.
- Do not stick any foreign objects into the monitor to prevent risk of fire or shock.
- Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the warranty as well. Contract Pixio directly for all RMA issues.
- Take note of elevation and temperature zone warnings on the adapters.
Cleaning the Product
Take the following steps when cleaning.
-
Power off the product and computer.
-
Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. -
Wipe the monitor with a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
Do not spray water or detergent directly on the product. -
Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
-
Connect the power cord to the product when cleaning is finished.
-
Power on the product and computer.
Preparation
Product Includes
Product Assembly
1. Assemble the base to the stand with sets of M4 x 16mm screws as pictured.
Caution: Please do not put the monitor directly on a flat surface or
press down on the monitor. There is a risk of damaging the monitor.
Product Disassembly
To remove the whole base, do as above:
- Push the Slider on the back cover. Lift the base.
- Take it out in the arrow pointed direction.
Dimension & Weight
Monitor Inputs
Control Panel
Main OSD Navigation
| Up | Move up the OSD Menu / Increase Value |
|---|---|
| Down | Move down the OSD Menu / Decrease Value |
| Left | Move left on the OSD Menu / Back |
BACK
Right| Move right on the OSD Menu / Enter
ENTER
Press| Turn ON / OFF the OSD Menu
How to Reconfigure
- To turn ON/OFF the OSD Menu, Press Jog Button.
- To turn ON/OFF the Monitor, Press Jog Button for more than 2 seconds.
OSD Menu
Display
- Brightness: Adjust the display brightness value from 0 to 100.
- Contrast: Adjust the display contrast value from 0 to 100.
- Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
- Preset: Select Preset from Standard, User, Movie, Photo, RTS, FPS1, and FPS2.
- Aspect Ratio: Select Aspect Ratio from Full, 16:9, and 4:3. [disabled when turn on the FreeSync]
- Sharpness: Adjust the Sharpness value from 0 to 100.
- Ultra Vivid: Turn Ultra Vivid On or Off.
Color
- Color Temperature: Select Color Temperature from Warm, Normal, Cool, sRGB, and User.
- Gamma: Select Gamma from Off, 1.8, 2.0, 2.2, and 2.4.
- Hue: Adjust the Hue value from 0 to 100.
- Saturation: Adjust the Saturation value from 0 to 100.
- Low Blue Light: Adjust the Low Blue Light value from 0 to 100.
Gaming Setup
- FreeSync Premium: Turn AMD FreeSync Premium On or Off.
- Overdrive: Select Overdrive from Off, Low, Middle, and High.
- Game Assist: Select Game Assist from Timer, Crosshair(LoS), and FPS Counter.
- Timer: Select Timer from Off, 15:00, 30:00, 45:00, 60:00 and 90:00
- Crosshair(LoS): Select Crosshair type.
- FPS Counter: Turn FPS Counter On or Off.
- HDR: Turn HDR On or Off.
- DCR: Turn DCR On or Off.
- PRT: Turn MPRT On or Off.
Input
Switch the signal input to Auto Select, DP1(1.4), DP2(1.4), HDMI (2.0) & HDMI (2.0).
System Setup
- Language: Change the OSD menu display language
- OSD Setup: Select OSD Setup from H Position, V Position, OSD Timeout, Transparency.
- H Position: Adjust 0-100 V Position: Adjust 0-100 OSD Timeout: Adjust 15-60 Transparency: Adjust 0-100 Audio: Select Audio from Volume or Mute. Mute: turn On or Off Volume: Adjust 0-100 Reset: Select Reset from Cancel or Confirm.
User Data
User Data: Load/Save Brightness, Contrast, Black Equalizer, Saturation, Preset, Color Temperature, Gamma Overdrive, Volume, Mute, Low blue light settings on the monitor.
Adaptive-Sync. (AMD FreeSync or Nvidia G-Sync.)
FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and compatibility with the AMD graphics card.
Nvidia G-Sync
If you are using Nvidia GTX 10series or RTX20series graphic cards, you can use
Adaptive-Sync (FreeSync) function. This requires Nvidia’s latest GPU updates.
Please download and latest update if you are intend to use Adaptive-Sync
(FreeSync) over your Nvidia GTX graphics cards.
FYI, How to enable FreeSync on Nvidia GPU
- Right-click on the Windows desktop and select Nvidia Control Panel
- Expand the Display section of the left-hand navigation pane and select Set up G-Sync
- Check the “Enable G-Sync, G-Sync Compatible” box and select the Active Sync display you’d like to use if you have more than one monitor
- Check the “Enable settings for the selected display model” box
- Click “Apply” in the bottom-right
If the above isn’t available, or isn’t working, you may need to go to Manage 3D Settings, click the Global tab, scroll down to Monitor Technology, select G-SYNC Compatible in the drop-down, and then click Apply Even though AMD Radeon GPUs and some FreeSync monitors support Adaptive Sync over HDMI, Nvidia says you’ll need to connect your GeForce GPU to your FreeSync monitor using a DisplayPort cable to activate variable refresh rates.(G-Sync monitors only work over DisplayPort as well.) Update: