Pixio PX277 PRO Gaming Monitor User Manual

Pixio PX277 PRO Gaming Monitor

Before Using the Product

Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Make sure to allow some space. Do not install a near a heater or any other high-temperature product or humidifier.

• Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight for an extended period of time.
• Make sure to keep the original packaging material. If there are any need to transport the monitor, the packaging material will be the best method for successful delivery.
• Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents to clean the monitor. They may result in permanent damage to the panel and will void the warranty.
• Always check to make sure the power cord is unplugged before cleaning the monitor.
• Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components in the monitor.
• Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.
• Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries. When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider for the best results.
• The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up. Avoid confined spaces like a bookcase for proper functionality.
• If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk of damage from lightning strikes or other abnormal voltage incidents.
• Do not overburden any socket to prevent risk of fire or shock.
• Do not stick any foreign objects into the monitor to prevent risk of fire or shock.
• Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the warranty as well. Contract Pixio directly for all RMA issues.
• Take note of elevation and temperature zone warnings on the adapters.
• The icon indicates that the adapter is suited for areas under 2000 meters.
• The icon indicates that the adapter is suited for non-tropical areas.

Cleaning the Product

Take the following steps when cleaning.

1. Power off the product and computer.
2. Disconnect the power cord from the product. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.
3. Wipe the monitor with a clean, soft and dry cloth. Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor. Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5. Connect the power cord to the product when cleaning is finished.
6. Power on the product and computer.

Characteristics of Crystal Display Monitors

When the following potential issues occur, please be aware that the monitor is functioning in accordance of manufacturing tolerances and does not mean the monitor has a defect.

• When first turning on the monitor, the screen may flicker. Please turn the monitor off and turn it back on.
• The brightness levels on different images may appear uneven.
• The effective pixel count should approximate 99.99%, but there may be a possible 0.01 % or less failure rate due to dead or stuck pixels.
• If the monitor displays a single static image for a long period of time, there may be an image burn that can be seen while viewing a different image. The burned image will gradually disappear and turning off the monitor for an extended period of time will speed up the process.
• If you notice extended, constant flickering or if the screen constantly goes to black, please contact Pixie directly and we will assess and have the unit repaired if necessary. Please do not attempt to repair the unit yourself as it will result in voiding the warranty.

Product Includes

Product Assembly

1. Open the package, assemble the stand base to the stand stem with 3 pieces of M4*16mm screws. Screw as shown in the illustration.
2. Take out the product with foam still attached, and gently place it on a desktop or table. And insert the stand stem into the back of the monitor as shown in the illustration
3. Stand assembly completed

Dimension & Weight

Monitor Inputs

1. LAN
2. USB1
3. USB2
4. USB-B

1. DC
2. HDMI HDMI 2.0, 144Hz, FreeSync Premium, HDR
3. USB Firmware Update
4. DP DisplayPort 1.2, 165Hz, FreeSync Premium, HDR
5. Type C 165Hz, 65W Power Charge, FreeSync Premium
6. AUDIO OUT

WARNING:
Always use the appropriate power cord

Control Panel

Menu Short Cut

Main OSD Navigation

How to Reconfigure

To turn ON/OFF the OSD Menu, Press Jog Button

OSD Menu

Display

• Brightness: Adjust the display brightness value from 0 to 100.
• Contrast: Adjust the display contrast value from 0 to 100.
• Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
• Preset: Select Preset from Standard, User, Movie, Photo, RTS, FPS1, and FPS2.
• spect Ratio: Select Aspect Ratio from Full, 16:9, and 4:3. [disabled when turning on the FreeSync]
• Sharpness: Adjust the Sharpness value from 0 to 100

Color

• Color Temperature: Select Color Temperature from Warm, Normal, Cool, sRGB, and User.
• Gamma: Select Gamma from Off, 1.8, 2.0, 2.2, and 2.4.
• Hue: Adjust the Hue value from 0 to 100.
• Saturation: Adjust the Saturation value from 0 to 100.
• Low Blue Light: Adjust the Blue Light Filter value from 0 to 100.

Gaming Setup

• FreeSync Premium: Turn FreeSync On or Off.

• Overdrive: Select Overdrive from Off, Low, Middle, and High.

• Game Plus: Select Game Plus from Time, Crosshair(LoS), and FPS Counter.

• Timer: Select Timer from Off, 15:00, 30:00, 45:00, 60:00 and 90:00

• Crosshair(LoS): Select Crosshair type.

• FPS Counter: Turn FPS Counter On or Off.

• HDR: Turn HDR On or Off.

• DCR: Turn DCR On or Off.

• MPRT: Turn MPRT On or Off.

• RGB Light: Turn RGB Light On or Off.

Input

• Switch the signal input to Auto Select, Type C, DP [1.2], or HDMI [2.0].

System Setup

• Language: Change the OSD menu display language
• OSD Setup: Select OSD Setup from H Position, V Position, OSD Timeout, Transparency.
• H Position: Adjust 0-100
• V-Position: Adjust 0-100
• OSD Timeout: Adjust 15-60
• Transparency: Adjust 0-100
• Audio: Select Audio from Volume or Mute.
• Mute: turn On or Off
• Volume: Adjust 0-100
• KVM: Select KVM from Off, USB UP or Type C
• Reset: Select Reset from Cancel or Confirm.
• Firmware Update: Firmware Update from Cancel or Confirm.

User Data

• User Data: Load/Save Brightness, Contrast, Black Equalizer, Saturation, Preset, Color Temperature, Gamma, Overdrive, Volume, Mute, Low blue light settings on the monitor.

Connection

Select a connection method suitable for each of your source device

PLEASE NOTE

When connecting, use the display cable that came with the components of the monitor. A Pixio branded cable is recommended.

1. Connect Monitor 1 to PC 1 with a USB-B to USB-A Cable.*
2. Connect Monitor 1 to PC 2 with a USB-C to USB-C cable or a USB-C to USB-A cable.
3. Connect your keyboard and mouse to USB1 and USB2 on Monitor 1.

Adaptive-Sync. (AMD FreeSync or Nvidia G-Sync.)

FreeSync technology is a solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during gameplay. Improve your gaming experience. The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and compatibility with the AMD graphics card.
Nvidia G-Sync
If you are using Nvidia GTX 10series or RTX20series graphic cards, you can use Adaptive-Sync (FreeSync) function. This requires Nvidia’s latest GPU updates.
Please download and latest update if you are intend to use Adaptive-Sync (FreeSync) over your Nvidia GTX graphics cards.
FYI, How to enable FreeSync on Nvidia GPU

1. Right-click on the Windows desktop and select Nvidia Control Panel
2. Expand the Display section of the left-hand navigation pane and select Set up G-Sync
3. Check the “Enable G-Sync, G-Sync Compatible” box and select the Active Sync display you’d like to use if you have more than one monitor
4. Check the “Enable settings for the selected display model” box
5. Click “Apply” in the bottom-right If the above isn’t available, or isn’t working, you may need to go to Manage 3D Settings, click the Global tab, scroll down to Monitor Technology, select G-SYNC Compatible in the drop-down, and then click Apply Even though AMD Radeon GPUs and some FreeSync monitors support Adaptive Sync over HDMI, Nvidia says you’ll need to connect your GeForce GPU to your FreeSync monitor using a DisplayPort cable to activate variable refresh rates.(G-Sync monitors only work over DisplayPort as well.) Update:

References

• Official Pixio Store - Best Performance Gaming Monitors
• Support2 – Pixio Japan
• Pixio Gaming
• Reddit - Dive into anything

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>