Pixio PS2DUAL Premium Dual Monitor Stand Installation Guide

: October 30, 2023
: Pixio

Table of Contents

Pixio PS2DUAL Premium Dual Monitor Stand
Product Information
Product Usage Instructions
MAINTENANCE
FEATURES
TOOLS
WHAT IN THE BOX
INSTALLATION INSTRUCTIONS
MOUNTING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pixio PS2DUAL Premium Dual Monitor Stand

Product Information

The product is a monitor mount that can hold up to two flat monitors weighing between 1-18kg each or two curved monitors weighing between 1-14kg each. The mount is compatible with various Pixio monitor models as well as non-Pixio brands that have VESA hole depths compatible with the screw sizes provided in the chart below.

Pixio Monitor Model	M-A	M-B	M-C	M-D	M-E	M-F
PX222	x	x	x
PX248 Pro	x	x	x
PX248 Prime	x	x	x
PX248 Prime S	x	x	x
PX248 Prime Advanced	x	x	x
PX243	x	x	x
PXC243S	x	x	x
PX257 Prime	x	x	x
PX259 Prime	x	x	x
PX259 Prime S	x	x	x
PX273	x	x	x	x	x	x
PX273 Prime	x	x	x	x	x	x
PX274 Prime	x	x	x	x	x	x
PX277 Prime	x	x	x
PX278	x	x	x
PX279 Prime	x	x	x
PX275C Prime	x	x	x
PX277 Pro	x	x	x	x	x	x
PXC273S*	x	x	x	x	x	x
PXC277*	x	x	x
PXC277 Advanced*	x	x	x	x	x	x
PXC279*	x	x	x
PXC325	x	x
PXC327	x	x
PXC327 Advanced	x	x
PXC348C	x	x	x	x	x	x

For PXC273S, PXC277, PXC277 Advanced, and PXC279, use the VESA plate adapter that comes with the monitor.

Product Usage Instructions

Determine the weight of your monitor(s) to ensure they are within the weight limit of the mount.
Check the VESA hole depth of your monitor and refer to the chart to determine which screw set is compatible with your monitor.
If you have a Pixio monitor model listed in the chart, use the corresponding screw set. If you have a non-Pixio brand monitor, use the proper screw size based on your monitor’s VESA hole depth.
If you have a PXC273S, PXC277, PXC277 Advanced, or PXC279 monitor, use the VESA plate adapter that comes with the monitor.
Attach the mount to a sturdy surface using the provided screws and anchors. Ensure that the mount is level and secure before attaching the monitors.
Attach the monitors to the mount using the screw set that corresponds to your monitor model or VESA hole depth. Follow the instructions provided with your monitor for attaching it to a VESA mount.
Adjust the position of the monitors as desired and tighten the screws to secure them in place.

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement.

MAINTENANCE

Check that the product is secure and safe to use at regular intervals (at least every three months).

FEATURES

Below is a chart that shows which screw sets are compatible with your monitor. For non-Pixio brands, please check your monitor’s VESA hole depth and use the proper screw size. For questions or comments, please contact us at [email protected]