JBL Quantum 810 Wireless Over-Ear Performance Gaming Headset User Guide
- June 5, 2024
- JBL
Table of Contents
JBL Quantum 810 Wireless Over-Ear Performance Gaming Headset User Guide
JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine
Software requirements
Platform: Windows 10 (64 bit only) / Windows 11 500MB of free hard drive space for installation.
- Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE
- JBL QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation required
WHAT’S IN THE BOX
Requirements
JBL QuantumENGINE SOFTWARE REQUIREMENTS
Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC | VR
CONNECTIVITY| PC| PS4/PS5| XBOX™| NINTENDO SWITCH™|
MOBILE| MAC| VR
---|---|---|---|---|---|---|---
3.5 mm Audio Cable| Stereo| Stereo| Stereo| Stereo| Stereo| Stereo| Stereo
2.4G Wireless| | Stereo| Not Compatible| Stereo| Not Compatible| Stereo|
Stereo
Bluetooth| Stereo| Not Compatible| Not Compatible| Stereo| Stereo| Stereo| Not
Compatible
OVERVIEW
- ANC / TALKTHRU LED
- ANC / TALKTHRU button
- Game audio-chat balance dial
- Volume Control
- Detachable Windshield foam
-
- Notification LED for mic mute / unmute
-
- Microphone Mute / unMute
- CHARGING LED
- 3.5mm Audio Jack
- USB-C port
- Voice Focus Boom Microphone
- Bluetooth pairing button
- POWER ON / OFF slider
- POWER / 2.4G / Bluetooth LED
- RGB Lighting Zones
- Flat-fold ear cup
- 2.4G PAIRING BUTTON
- Volume Control
- MIC MUTE BUTTON
POWER ON & CONNECT
Bluetooth
SETUP
BUTTON COMMAND
First time setup
- Connect the headset to your PC via 2.4G USB wireless connection.
- Go to “Sound Settings” -> “Sound Control Panel”.
- Under “Playback” highlight “JBL QUANTUM810 WIRELESS GAME” and select “Set Default” -> “Default Device”.
- Highlight “JBL QUANTUM810 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
- Under “Recording” highlight “JBL QUANTUM810 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
- In your chat application select “JBL QUANTUM810 WIRELESS CHAT” as the default audio device.
- Follow the onscreen instructions to personalize your sound settings.
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
Driver size: 50 mm Dynamic drivers
Frequency response (Passive): 20 Hz – 40 kHz
Frequency response (Active): 20 Hz – 20 kHz
Microphone frequency response: 100 Hz -10 kHz Max input power 30 mW
Sensitivity: 95 dB SPL @1 kHz / 1 mW
Maximum SPL: 93 dB
Microphone sensitivity: -38 dBV / Pa@1 kHz
Impedance: 32 ohm
2.4G Wireless transmitter power: <13 dBm
2.4G Wireless modulation: GFSK, π/4 DQPSK
2.4G Wireless carrier frequency: 2400 MHz – 2483.5 MHz
Bluetooth transmitted power: <12 dBm
Bluetooth transmitted modulation: GFSK, π/4 DQPSK
Bluetooth frequency: 2400 MHz – 2483.5 MHz
Bluetooth profile version: A2DP 1.3, HFP 1.8
Bluetooth version: V5.2
Battery type: Li-ion battery (3.7 V / 1300 mAh)
Power supply: 5V 2 A
Charging time: 3.5 hrs
Music play time with RGB lighting o: 43 hrs
Microphone pickup pattern: Unidirectional
Weight: 418g
FCC Statements
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLQ810WL) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.002 W/Kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user›s
head and the back of the headset.
The use of belt clips, holsters and similar accessories shall not contain
metal parts in its assembly. Use of accessories that do not meet these
requirements may not comply with IC RF exposure requirements and should be
avoided.
IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ810WLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.106W/Kg.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user›s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLQ810WL
Body operation
The device was tested for typical bodily operations where the product was kept
with 5 mm distance attaching away from the body. Noncompliance with the above
restrictions may result in violation of IC RF exposure guidelines. Use only
the supplied or approved antenna.
IC: 6132A-JBLQ810WLTM
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>