FIXED FIXBIA2 Bikee ALU Mobile Phone Holder for Bike User Manual
- June 5, 2024
- FIXED
Table of Contents
FIXED FIXBIA2 Bikee ALU Mobile Phone Holder for Bike User Manual
Thank you for purchasing the aluminium FIXED Bikee ALU mobile phone holder for
bike. Its installation is very easy, please follow the steps below:
Read this manual before use and keep it for future reference.
HOLDER ASSEMBLY
- First, attach the head of the holder to the base of the holder with the screw. Then insert the black screw into the screw hole in the head of the holder, place the base of the holder on the other side of the head and align the screw holes of each part. Rotate the holder to the desired vertical or horizontal position. Use the Allen key to screw the head of the holder to the base and you are done.
- Now attach the holder to the handlebars. Unscrew the screw and open the handlebar mounting mechanism. Insert one of the plastic diameter reducers into the mechanism, whichever fits better on the handlebars, and slide it onto the handlebars. Close the mechanism and screw it so that the holder is firmly secured and does not rotate.
- The holder is now assembled and attached to the handlebars now you can insert and secure the phone. First, use the screw on the right side of the head to unscrew the thread and thus increase the width of the holder. Then insert the phone and tighten the screw carefully to secure the phone in the holder.
PACKAGE CONTENT
- 1x head of the FIXED Bikee ALU holder
- 1x handlebar base of the FIXED Bikee ALU holder
- 1x screw for connecting the head to the base of the holder
- 1x screw for attaching the clamp to the handlebars
- 1x Allen key
- 2x plastic diameter reducer on the handlebars
PROBLEM SOLVING
In case of problems with the product, you can contact our support at
www.fixed.zone/podpora
FIXED. zone a.s. Kubatova 6 Ceské Budjovice 37004 Czech Republic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>