FIXED 100000 mAh Power Bank with Wireless Charging User Manual

June 3, 2024
FIXED

FIXED 100000 mAh Power Bank with Wireless Charging

OVERVIEW

  1. Information LCD display
  2. microUSB input for charging the power bank
  3. USB-A output
  4. USB-C input/output
  5. Start button
  6. Coil for wireless charging

Specifications

  • Capacity: 10,000 mAh
  • Battery type:Li-Pol
  • microUSB input: 5V/3A, 9V/2 A
  • USB-C input:5V/3A, 9V/2.2A, 12V/1.54, 20W max
  • Wireless charging output: 7.5 W, 10 W
  • USB-C output: 5V/3A, 9V/2.2A, 12V/1.5A 20W max
  • USB-A output: 5V/3A, 9V/2A, 12V/1.5A 18W max., 0C 3.0 support
  • Dimensions:140 x 67 x 14 mm
  • Weight:180 g
  • Operating temperature: 0-40″C
  • Charging time: max. 5 hours according to the adapter type
  • Efficiency: min. 90 % (at 1A)
    Number of charging cycles of the battery:min. 500p

Package content
MAGZEN power bank, power bank charging cable

Battery features
Built-in short circuit, overcharge and reverse polarity protection Comfortable use thanks to “suction pads”

Use
Before using the power bank for the first time, it is necessary to charge it. Plug the connector of the supplied cable to the charging port (4) of the power bank and plug the cable into the mains charger or USB port on your computer. The charging status is indicated by the built-in LCD display (1). When fully charged, “100” will appear on the display.

Checking the power bank charging status
Press the button (5) to check the charging status. The LCD display will show the charging status of the power bank.

Charging of a phone or another device using the cable
Use the cable and connect the device you wish to charge to the power bank. You can use the USB-C(4)or USB-A (3) outputs for charging. Charging starts automatically, the LCD display shows the charging status of the power bank and “0UT”. When fast charging, the display also shows “FAST”. The charging status of the device is indicated on the screen of the connected device.

Charging of a phone or another device that supports wireless charging
Power bank allows wireless charging of all devices supporting this type of charging. It also supports devices with MagSafe technology. Place the device on the wireless charging coil of the power bank (6). The power bank has built- in magnets for devices with MagSafe support, which automatically attach these devices to the correct position. Press the button (5) to start charging. The power bank allows you to charge the connected device and the power bank itself at the same time.

Product care and maintenance
If you do not use the device for longer period of time, it is necessary to charge the battery every two or three months to prevent reduction in device power. Use fine fabric to clean the body of the power bank.

Important note
Do not expose the power bank to the effects of water or other liquids and do not use it in rain.

Service and warranty
The product is warranted in accordance with the regulations in force in the countries where it is sold. In case of service problems, contact the dealer from which you have purchased the product.

Safety precautions

  • Do not expose the device to rain or snow and do not dip it into water.
  • Do not leave the power bank on sun in car.
  • Do not expose the device to direct sunlight or leave it near heat sources.
  • Do not use the power bank in case of a strong impact, if it has been dropped or damaged in any way. Do not dismantle the power bank, there is a danger of electric shock and/or burn. Do not modify the power cable.
  • Keep the power bank out of reach of children. Unauthorized opening or modification of parts of the product will result in the warranty void.

Disposal

(Applies in countries with separate collection systems for recyclable materials.) Old products must not be disposed of with household waste! If the product no longer works, dispose of it in accordance with applicable regulations of your country. This ensures that old productts are recycled in a professional way and also eliminates negative consequences to the environment. For this reason, the electrical device is marked with the symbol shown here. This product is CE marked in accordance with EMC directive 2014/35/EU and RoHS 2011/65/EU. FIXED.zone a.s. declares that this product is in compliance with essential requirements and other relevant provisions of EMC directives 2014/35/EU and 201/65/EU.

FIXED.zone a.s. Kubatova 6 Ceské Budějovice 37004 Czech Republic

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals