FIXED FIXGRA-BK Graphite Active Stylus for iPads User Manual
- June 5, 2024
- FIXED
Table of Contents
FIXED FIXGRA-BK Graphite Active Stylus for iPads User Manual
Thank you for purchasing the FIXED Graphite active stylus. The active touch
stylus is designed for Apple iPad tablets of the 6th generation and later. The
stylus is extremely accurate to one pixel and has zero delay response. The
Graphite perfectly simulates writing and drawing on paper and you can
naturally rest the palm of your hand on the touch screen without the display
responding to it. The FIXED Graphite Stylus contains magnets for better
attachment to the tablet body. Thanks to the intelligent tip of the stylus you
only need to tilt the tip in order to create a stronger or a weaker line. The
battery life of the stylus is up to 20 hours of operation. To turn the stylus
on, just gently touch the upper contact surface and you can immediately start
using it.
Read this manual before use.
PRODUCT DESCRIPTION
- Contact surface for turning the stylus on
- USB-C charging connector
- LED indicating that the stylus is turned on
- Replaceable tip
COMPATIBILITY
The FIXED Graphite Stylus is compatible with the following Apple iPad tablet models.
- iPad 2018 (6th gen) A1893 A1954
- iPad mini (5th gen) A2133 A2124 A2126 A2125
- iPad Air 2019 (3rd gen) A2152 A2123 A2153 A2154
- iPad Pro 11 (3rd and 4th gen) A1980 A2013 A1934 A1979 A2228/A2068/A2230/A2231
- iPad 2019 (version7) A2197 A2200 A2198
- iPad Pro 12.9 inches(3rd and 4rd gen) A1983/ A2014/ A1895/ A1876/ A2229/ A2069/ A2232/ A2233
Make sure that your Apple iPad model is one of the above.
USE
- iPad OS 12.2 and higher.
- Turn off the Apple Pencil in the settings.
- Turn off the “Write using only the Apple Pencil” option in the settings of the Notepad.
- Gently tap the stylus to turn it on. Turning on is indicated by a blue LED. The stylus automatically turns off when not in use for 5 minutes.
- Thanks to the magnets, you can attach the stylus to the body of your tablet, just like the original Apple Pencil stylus.
- The stylus has a replaceable tip. To replace it, unscrew the tip and screw on a new one. The package contains 2 pcs.
CHARGING
- Use the cable included in the package to charge the stylus.
- Connect the cable to the USB port (5V) of the computer, wall charger or power bank.
- The indicator LED lights up red during charging. When the stylus is fully charged (usually after 120 minutes), the LED turns off.
Blue LED is on – stylus is on
Red LED on – stylus is charging
Green LED is on – stylus is fully charged
Blue LED flashing – battery capacity has dropped below 30%, stylus needs
to be charged.
PRODUCT DETAIL
- Material: aluminium alloy
- Input: 5 V 0,2 A
ACKAGE CONTENT
- 1x FIXED Graphite stylus
- 2x Replaceable tip
- 1x USB-C charging cable
- 1x User manual
PROBLEM SOLVING
In case of problems with the product, you can contact our support at www.fixed.zone/podpora
This product is CE marked in accordance with EMC Directive EMC 2014/30/EU and RoHS 2011/65/EU. FIXED.zone a.s. hereby declares that this product is in compliance with essential requirements and other relevant provisions of EMC Directives EMC 2014/30/EU and RoHS 2011/65/EU.
FIXED.zone a.s.
Kubatova 6
České Budějovice 37004
Czech Republic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>