TOZO T12 Pro Wireless Earbuds User Manual
- June 3, 2024
- TOZO
Table of Contents
TOZO T12 Wireless Earbuds
Product diagrammatic sketch
Wearing diagrammatic sketch
Wearing Steps
- Step 1: Ensure the earbud tip facing downwards, then place earbuds into ear.
- Step 2: Rotate earbuds back to auricle side to fit snugly.
Operation of earbuds
How to pair
- Take out the two earbuds from charging case, they will turn on automatically and link to each other within 10 seconds.
- The two earbuds flash alternately in red and blue (pairing mode).
- Search for pairing name [TOZO-T12] and select it in your mobile.
Another method ofturning on & turning off
Turn on:
Press and hold the touch button for about 3 seconds to turn on (the headset is
turned off without the charging case)
Turn off:
When the headset is not playing music, press and hold the touch button for
about 5 seconds to turn off.
Clearpairing list
In the pairing mode of the left and right earbuds, double-click both MFB
button quickly.
Reset
Automatic reset when charging.
Charging
Charging the Earbuds
- Put the earbuds into the charging case, they will power off & be charged automatically. When the red LED lights up, it means that earbuds are being charged from charging case.
- When the Bluetooth headset is fully charged, the charging case will automatically enter the sleep low power consumption state.
Charging the Charging Case
Please use the 5V/1A adapter to charge the charging case which can be charged
with a computer USB or other USB interface charger
Box wireless charging
Specially designed for modern life, without charging cables enjoy the
convenience of unplugged charging and instant charging.
Charging warning
Don’t tap the earbuds touch button while in charge otherwise it will be fail
to pair. Then you should follow the reset to factory settings.
Button operation
- Put the earbuds into the charging box, and the charging box will charge the earphones automatically. The corresponding left / right earplug display light on the charging box flashes, indicating that the earphone is charging. The charging box light shows the current power supply, and the battery indicator light goes out after 5 seconds.
- When the battery power of the charging box is 5 100%, the digital screen will be on for 5 seconds to display the current power. When the power drops to 0-5%, the digital screen will flash for 5 seconds to display the power level. The digital display goes out when it is not charged.
Discharge (charge the paired Bluetooth headset) Instructions for use:
Discharge: The charging case charges the Bluetooth headset. After the
Bluetooth headset is fully charged, the charging stand will automatically
enter the sleep state, and the power consumption is less than 200uA at this
time.
Specification
Waterproof
Waterproof for daily use (sweating, rain, washing face, showering. having a bath, etc, but not for swimming under water) Please note that the phone’s Bluetooth signal can not be transmitted underwater.
Warning
- Do not dismantle or refit the product.
- Keep away from corrosive liquids.
- Keep away from extreme ambient temperatures below-10’C or above 60’C.
- Keep away from children and pets.
- Do not touch the earbuds with sharp objects.
- Do not use the product in thunderstorm weather.
- if it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.
- Since the Bluetooth signal cannot be transmitted underwater, swimming, diving will caused the signal to disconnected or intermittent.
SPECIAL REMINDER:
Wipe the hardware contacts of the headset and charging box when the headset is
not charging
Note:
If your problem is not answered above, please contact us via email, we will
respond within 24 hours.
Battery Warning!
This product has builtin lithium battery. Do not expose the product to strong
sunlight, fire or throw it into the fire to avoid explosion.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>