TOZO HT1 Wireless Headsets Instruction Manual
- October 30, 2023
- TOZO
Table of Contents
TOZO HT1 Wireless Headsets
Safety Instructions
- This product contains magnetic material. Please consult your doctor as to whether it will affect implantable medical devices.
- Please keep this product away from sources of fire and heat. Do not place an exposed flame source (e.g. a lighted candle) on or near this product.
- Do not modify the product without authorization.
- Do not use this product in conjunction with an inverter.
- Only use this product with a power supply that has been approved by the relevant authorities and meets local regulatory requirements (e.g. UL, CSA, VDE, CCC).
- The batteries supplied with this product may pose a fire or chemical burn hazard if not handled properly.
- Do not overheat the product containing the batteries (e.g. keep out of direct sunlight and away from sources of fire etc.).
- If the speaker is exposed to salt or chlorinated water, wash it gently with clean water afterwards to remove any residue
- Make sure the connector port is completely dry before charging.
- Do not charge the speaker when it is wet.
Product description
Specifications
Key function guide
X1: Press once X2: Press twice Hold: Press and hold
TOZO app
Download the TOZO App for UI customization, EQ settings and more.
- UI customization: Most of the controls can be customized in the App.
- EQ settings: There’re lots of EQ settings you can choose in the App to optimize your experience while enjoying different music genres.
- Earbuds firmware update: The earbuds firmware can be updated in the App. You will be informed once the new version of firmware is detected when you connect the earbuds with the App.
TOZO app pairing
Step1:
TOZO APP can be downloaded from the TOZO website and Google Play and Apple APP
Store. 
Step 2:
Bluetooth pairing with your head phones.
Step 3:
Open the TOZO APP and pairing with your HT1.
Solutions to common problems
Disclaimers
TOZO reserves the right of final interpretation of this manual and the design
and specifications are subject to change without notice.
Thank you for purchasing the TOZO authentic product.
For more latest products, parts and accessories,
please visit: www.tozostore.com
For any assistance please contact Email: info@tozostore.com
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.