TOZO T12 True Wireless Stereo Earbuds User Manual

www.tozostore.com

T12 True Wireless Stereo Earbuds
User Manual

Product diagrammatic sketch

Wearing diagrammatic sketch

Wearing Steps

Step 1: Ensure the earbud tip facing downwards, then place earbuds into ear.
Step 2: Rotate earbuds back to auricle side to fit snugly.
With earbud tips facing upwards is an incorrect way to wear the earbuds.

Operation of earbuds

4.1 How to peir

1. Takeout the two earbuds from charging case they will turn on automatically and link to each other within 10 seconds.
2. The two earbuds flash alternately in red and blue (pairing mode).
3.  Search for pairing name (1020 7121 and select it in your mobile.

Insulating film
For the first use please pick up the headset and tear on the insulating film on the headset before using
4.2 Anothermothodoltuming on & turnIngoff
TUm on: ROSS and hold the touch button for about 3 seconds to turn on (the headset Is turned off without the charging easel
Turn off. When the headset is not playing music press and hold the touch button for about 5 seconds to turn off.
43 Clear paldnglist
In the pairing mode of the left and right earbuds, double-click both 1013 button quickly.
4.4 Reset
If only one earbud connect the phone/the two earbuds can not parr together, please try the below new reset steps:

1. Delete 8011020112) Bluetooth records on your phone, then turn off the Bluetooth
2. Fick up two earbuds from charging case, then press and hold both earbuds until) red lights on to turn off earbuds, and then release fingers(that means press and hold about 5s).
3. PfeSS and hold the both earbuds again, release fingers after blue light fast blink 3 seconds (that means press and hold about 10s).

Reset Is complete when one of earbuds flash red and blue alternately, turn on the Bluetooth to connect again.

Charging

5.1 Charging the Earbuds

1. Put the earbuds into the charging case they will power off & be charged automatically. When the red LED lights ug, it means that earbuds are being charged from charging case.
2. When the Bluetooth headset is fully charged, the charging case will automatically enter the sleep low power consumption state.

5.2 Charging the Charging Case
Please use the 5V/1A adapter to charge the charging case, which can be charged with a computer USB or other USB interface charger.
5.3 Box wireless charging
Specially designed for modern life, without charging cables, enjoy the convenience of unplugged charging and instant charging.
5.4 Charging warning
Don’t tap the earbuds touch button while in charge, otherwise it will be fail to pair.
Then you should follow the reset to factory settings.

Button operation

6.1 Earbuds LED indicator

and then goes out

6.2 Right Earbud

songs.
Answer Phone Call| Single touch MFB button to answer.
Hang Up Phone Call| Long touch the MFB button for 2 seconds to hang up the phone.
Reject Incoming Call| Long touch the MFB button for 2 seconds to reject the call.
Connect back state| Pick up the Bluetooth headset from the charging case, and the headset will automatically return to the connected state (about 20S) after being turned on.

6.3 Left Earbud

switch songs.
Answer Phone Call| Single touch MFB button to answer.
Hang Up Phone Call| Long touch the MFB button for 2 seconds to hang up the phone.
Reject Incoming Call| Long touch the MFB button for 2 seconds to reject the call.
Connect back state| Pick up the Bluetooth headset from the charging case, and the headset will automatically return to the connected state (about 20S) after being turned on.

Indicatordisplaydescription

Charging display (that is, the power display when charging the product with an external charger)| When the battery power is between 0% and 33%, the red light flashes
---|---
When the battery power is between 33-66%. The pink light was flashing
The blue indicator flashes when the battery is between 66% and 99%
The blue light is always on at 100% power
Discharge display (that is, the product indicates the effect when charging the matching Bluetooth headset)| When the battery power is between 0% and 33%, the red light flashes
---|---
When the battery power is between 33-66%. The pink light was flashing
The blue indicator flashes when the battery is between 66% and 99%
The blue light is always on at 100% power

1. Put the earbuds into the charging box, and the charging box will charge the earphones automatically. The corresponding left / right earplug display light on the charging box flashes, indicating that the earphone is charging. The charging box light shows the current power supply, and the battery indicator light goes out after 5 seconds.
2. When the battery power of the charging box is 5 – 100%, the digital screen will be on for 5 seconds to display the current power. When the power drops to 0-5%, the digital screen will flash for 5 seconds to display the power level. The digital display goes out when it is not charged.

Discharge (charge the paired Bluetooth headset) Instructions for use:

Discharge: The charging case charges the Bluetooth headset. After the Bluetooth headset is fully charged, the charging stand will automatically enter the sleep state, and the power consumption is less than 200uA at this time.
Specification:

Support Bluetooth profile| A2DP,AVRCP,AVDTP,AVCTP,HFP,SPP,HSP,TDS,MAP,PBAP,GAVDP,OPPV,RFCMM
---|---
Transmission Distance| 12m
Bluetooth working frequency| 2.402GHz-2.480GElz
Speaker type| Ø10mm2
Impedance| 32Ω2
Charging time of earbuds|  1.5 hours
Charging time of the charging case|  Type-C charging: 1.5 hours
Wireless charging: 2 hours

Waterproof

Waterproof for daily use (sweating, rain, washing face, showering, having a bath, etc, but not for swimming under water) Please note that the phone’s Bluetooth signal can not be transmitted underwater.

Notes for signal transmission distance (as show below)

TOZOApp

• Download the TOW App for UI customization, E0 settings and more.

• UI customization: Most of the controls can be customized In the App.
  

• E0 settings There’re lots of E0 settings you can choose In the App to optimize your experience while enjoying different music genres.

• Earbuds firmware update: The earbuds firmware can be updated In the App. You will be informed once the new version of firmware Is detected when you connect the earbuds with the App.

TOZOApp

Step 1: Download the TOZO App on your phone.
Step 2: Bluetooth pairing with your earbuds.
Step 3: TOW App pairing with your earbuds.
Warning!

1. Do not dismantle or refit the produce.
2. Keep away from corrosive liquids.
3. Keep away from extreme ambient temperatures belowint or above WC
4. Keep away from children and pets.
5. Do not touch the earbuds with sharp objects.
6. Do not use the product in thunderstorm weather.
7. If it has not been used for more than a month, please charge and maintain it In time to ensure that it is safe.
8. Since the Sluetooth signal cannot be transmitted underwater, swimming, diving will caused the signal disconnected or intermittent.

FAQ:

1.Q: Failed charging of the charging case
A Make sure the charging cable is Intact and plugged in property.
2.Q: Two devices named “T020 T12” are found.
A: Delete both names and search again.
3. Q. Sound is unclear.
A:Increase the volume slowly on your phone and earbuds and keep them close to each other.
4 Q: Whycannot heat voice?
A 1. Ensure both earbuds have been turned on.
2. TtIlll up the phone’s volume to maximum.
3. Ty to tap the touch control once to play music.

SPECIAL REMINDER:
Wipe the hardware contacts or the headset and charging box when the headset is not charging
Note:
if your problem is not answered above. please contact us via we will respond within 24 hours.
Email  [email protected]
Battery Warning!
This product has built-in lithlum battery. Do not expose the product to strong sunlight fired throw It into the fire toavold explosion.

Thank you for purchasing the TOZO authentic product.
For more latest products, parts and accessories, please visit: www.tozostore.com
For any assistance please contact Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>