ZEBRONICS Zeb- Vita Pro Bluetooth Soundbar User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS Zeb- Vita Pro Bluetooth Soundbar
Thank you for purchasing ZEB-VITA PRO BT speaker. Please read this user manual
carefully before operation & save it for future reference.
Note:
- Avoid the use of this product at the high temperature and high humidity environment.
- Avoid self-disassemble of product, or it will result in the failure of warranty.
- Please charge the product with power adapter output rated voltage DC SV.
Features
- Wireless BT
- Supports USB & mSD card Built-in FM Radio
- AUX Input
- Call Function
- Media/ Volume control Built-in Rechargeable battery Dual Passive Radiators
- LED Display
- TWS Function
- Wall Mountable
Specifications
- Output power (RMS) : 24W (12W +12W)
- BT version : 5.0
- Driver size : 52mm x 2
- Speaker Impedance :40
- Frequency response : 1 00Hz-18kHz
- S/N ratio : 70dB
- Max. supported
- USB/mSD memory size : 32GB Supported
- audio formats : MP3, WAV, WMA
- Charging time : 3.5 H
- Playback time : 10 H*
- Product dimension (W x D x H) : 474×65 x 65 mm
- Net. weight : 913g
Package Contents
- Speaker : 1 unit
- Charging cable : 1 unit
Button Description
- Power/Mode Button
- Play/Pause, Scan Button
- Next I Volume+ Button
- Prev. / Volume- Button
- USB port
- Microphone
- Micro USB Charging Port
- Micro SD card Port
- AUX port
Button functions
- Press the MODE button to change the input mode of the speaker. Long press the MODE button to power ON/OFF the speaker.
- Short press the button to change the Next track or channel when in BT/USB mode or FM mode respectively. Long press the button to Increase the speaker volume.
- Short press the button to go to the Previous track or channel in BT/USB mode or FM mode respectively. Long press the button to decrease the speaker volume.
- Press the button to Play/Pause the track being played. Long press the same button to scan for FM channels in FM mode.
- During calls, press the button to attend/end a call. Long press the button to reject an incoming call.
Instructions for Use
Charging the Speaker
- Connect the USB charging cable to the Micro USB Charging port of the speaker and insert the other end into a USB Power source/adapter.
- Red LED glows indicating that the battery is being charged. The Red LED will turn off once it is fully charged.
Pairing your device with Bluetooth Speaker
- Power ON the speaker until you hear the indication tone for Bluetooth mode.
- Switch ON BT in your phone or tablet and search for nearby BT devices.
- Search for the BT name ”ZEB-VITA PRO” and tap to connect it.
Micro SD I use mode
Insert the Micro SD card / USB device to the respective ports of ZEB-VITA PRO
and the speaker would automatically start playing songs from the Micro SD
card/USB device.
AUX mode
Connect the speaker to an audio source (Phone/Laptop) using a 3.5mm to 3.5mm
AUX cable. Once connected, speaker automatically changes to AUX mode and there
after audio can be streamed via the speaker from the connected source.
FM mode
Switch the speaker into FM mode. Long press the button, to start scanning, for
FM channels. Once scanning is complete, press the button to change the
channels.
TWS function (requires two speakers)
- Keep both speaker in Bluetooth mode.
- Press play/pause button for 2 secs on either of the speakers and a notification tone for the TWS function can be heard.
- Now switch ON the phone Bluetooth to search for “ZEB-VITA PRO” and tap to pair it.
- If you would like to disconnect the two speaker, press play/pause button for 2 secs.
ISO 9001:2015 Certified Company www.zebronics.com