musicozy B09Y4HCRLM White Noise Sleep Headphones User Manual

musicozy B09Y4HCRLM White Noise Sleep Headphones

Product Information

Product Specifications:

• Bluetooth Name: BJ21-10
• Version: Bluetooth 5.2
• Charging: DC5V/2A
• Charging Port: Type C
• Charging Time: 2 Hours
• Continuous Play Time:
  • Plays up to 10 hours at maximum volume
  • Plays up to 13 hours at medium volume

Product Usage Instructions

TURN ON/OFF

1. Press and hold the ON/OFF button for 1.5 seconds to turn it on, the blue light flashes quickly, and it enters the pairing mode.
2. Press and hold the ON/OFF button for 3 seconds to turn off, accompanied by a beep.

CONNECT BLUETOOTH DEVICES
Turn on the product and turn on the phone’s Bluetooth, find BJ21-10 on the Bluetooth list, and select the device to complete  Bluetooth pairing.

CALLING

1. Answer a call/hang up a call: Single Click the ON/OFF button.
2. Decline a call: Press the ON/OFF button for 2 seconds.
3. Cancel dialing: Single click the ON/OFF button to cancel dialing before the call was answered.
4. Answer a third party call:
   • a. When the third call comes, single click the ON/OFF button tohang up the current call and answer the third call.
   • b. Double-click the ON/OFF button to pause the current call to answer the third call. Click the ON/OFF button to hang up the third call to go back to the previous call.
   • c. Long press to hang up the third call and keep the current call.

AUTO OFF TIME

4 Modes: 30 minutes/ 90 minutes/ 120 minutes/ cancel the timer
Setting Method: Three click the + button

Bluetooth Music

• Playing Music Play / Pause: Click the ON/OFF button
• Volume Up: Short click the + button
• Volume Down: Short click the – button
• Next Song: Long press the + button
• Last Song: Long press the – button

WHITE NOISE PLAYING (NATURE MODEL)

1. Turn On: Three click the – button with the prompt tone Naturemode
2. Turn Off: Three click the – button with the prompt tone Bluetooth mode, and return to the normal Bluetooth mode.
3. Volume Up: Short click the + button
4. Volume Down: Short click the – button
5. Next Song: Long press the + button
6. Last Song: Long press the – button

How To Disassemble And Wash The Sleep Mask?

The Bluetooth module is not washable! Please wash the sleep mask only after removing the Bluetooth module. Disassembly steps are shown in the figure.
Install: Be sure to install the Bluetooth module into the eye mask bag.

WHITE NOISE SLEEP HEADPHONES USE STEPS

1. Step 1: Connect the charging cable to the sleep headphones charging port.
2. Step 2: When fully charged, put the charging cable into the sleep headphones.
3. Step 3: Press and hold the ON/OFF button for 1.5 seconds to turn it on, the blue light flashes quickly, and enters pairing mode.

BUTTON FUNCTION

PRODUCT SPECIFICATIONS

• Bluetooth Name: BJ21-10
• Version: Bluetooth 5.2
• Charging: DC5V/2A
• Charging Port: Type C
• Charging Time: 2 Hours
• Continuous Play Time:
  • Plays up to 10 hours at maximum volume
  • Plays up to 13 hours at medium volume

TURN ON/OFF

1. Press and hold the ON/OFF button for 1.5 seconds to turn it on, the blue light flashes quickly, and it enters the pairing mode.
2. Press and hold the ON/OFF button for 3 seconds to turn off, accompanied by a beep.

CONNECT BLUETOOTH DEVICES: Turn on the product and turn on the phone’s Bluetooth, find “BJ21-10” on the Bluetooth list, and select the device to complete Bluetooth pairing.

CALLING

1. Answer a call/hang up a call: Single Click the ON/OFF button

2. Decline a call: Press the ON/OFF button for 2 seconds

3. Cancel dialing: Single-click the ON/OFF button to cancel dialing before the call was answered.

4. Answer a third-party call

   • a. When the third call comes, single-click the ON/OFF button to hang up the current call and answer the third call.
   • b. Double-click the ON/OFF button to pause the current call to answer the third call, if you want to end the third call. Click the ON/OFF button to hang up the third call to back to the previous call.
   • c. Long press to hang up the third call and keep the current call.

AUTO OFF TIME

4 Modes: 30 minutes/ 90 minutes/ 120 minutes/ cancel the timer Setting Method: Three click the “+” button
Bluetooth Music Playing

• Music Play / Pause: Click the ON/OFF button
• Volume Up: Short click the “+” button
• Volume Down: Short click the “_” button
• Next Song: Long press the “+” button
• Last Song: Long press the “-” button

WHITE NOISE PLAYING (NATURE MODEL)

1. Turn On: Three click the “_” button with the prompt tone “Nature mode”
2. Turn OFF: Three click the “_” button with the prompt tone “Bluetooth mode”, and return to the normal Bluetooth mode.
3. Volume Up: Short click the “+” button
4. Volume Down: Short click the “_” button
5. Next Song: Long press the “+” button
6. Last Song: Long press the “-” button

Nature model performance Default single loop

LIGHT STATUS

• Full Charged: Blue light lights on
• Charging: Red light lights on
• In Low Battery: Red light flash once a minute
• Battery Run Out: Red Light Flash 3 times then power off

How To Disassemble And Wash The Sleep Mask?

• The Bluetooth module is not washable!
• Please wash the sleep mask only after removing the Bluetooth module.
• Disassembly steps are shown in the figure.

Install

Be sure to the Bluetooth module into the eye mask bag.

WHITE NOISE SLEEP HEADPHONES USE STEPS

• Step 1
  Connect the charging cable to the sleep headphones charging port.

• Step 2
  When fully charged, put the charging cable into the sleep headphones

• Step 3
  Press and hold the ON/OFF button for 1.5 seconds to turn it on, the blue light flashes quickly, and enter pairing mode.

• Step 4
  Remove the Bluetooth module before cleaning/washing.

QA

• Q1: How long is the warranty?
  A1: We provide a one-year warranty for every product sold.

• Q2: The battery cannot be charged.
  A2: Please try to change a charging cable to see if it can be charged. If it still does not work, please contact us and we will send you a replacement.

• Q3: The speakers are broken, or one speaker has sound but the other one does not.
  A3: Please remove the speakers during washing. You can try to disassemble it to see if it is damaged. If it is a product quality problem, please contact us and we will send you a replacement.

• Q4: The playing time is not long enough and the battery will soon run out.
  A4: Please confirm how long it has been used. If it exceeds three months, the battery life will be shortened.

• Q5: The Bluetooth cannot be connected.
  A5: Please try to turn off all the Bluetooth on your phone first, then long press the switch button of the Bluetooth eye mask, and turn on the Bluetooth of your phone, find the Bluetooth named “BJ21-10” and connect it.

• Q6: Why does my Bluetooth sleep mask fade?
  A6: Few parts have this problem. Please wash it after you receive the sleep eye mask, which can avoid the problem of fading to a certain extent.

Bluetooth Qualification

• Brand Name: MUSICOZY
• Model / Type Reference: GH01
• Design Model Number: FAAH-200213
• Declaration ID: D055885
• QDID: 157025

Manufacturer:

• Shenzhen Longhua Tianwangzhi Technology
• Manufacturer Address: 5th Floor, Building 2, Phase 3, 1980 Cultural and Creative Park, Minzhi Street, Longhua New District, Shenzhen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>