INTELLINET 560993 16 Port Gigabit Ethernet PoE Plus Switch Instructions
- June 8, 2024
- INTELLINET
Table of Contents
INTELLINET 560993 16 Port Gigabit Ethernet PoE Plus Switch
For additional benefits:
Scan to register your product warranty or go to: register.intellinet-
network.com/r/560993
Connections & Indicators
LEDs
The LED indicators — Power, PoE, Link/Activity — make it easier to monitor the
switch and its connections. NOTE: All ports provide power to a connected
device, and all connected devices should comply with IEEE 802.3af.
Ports
All ports on the switch support Auto-MDI/ Green MDI-X functionality, so crossover cables and uplink ports are not needed for connections to PCs, routers, hubs, other switches, etc. Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
| LED | COLOR | STATUS | STATUS DESCRIPTION |
|---|---|---|---|
| PWR | Green | Off | PWR Off |
| On | PWR On | ||
| Link/ Act/ Speed | __ |
Yellow
| Off| No device is connected to the port
On| A device is connected to the
port at 10/100 Mbps speed
Flashing| Sending or receiving data
__
Green
| On| A device is connected to the
port at 1000 Mbps speeds
Flashing| Sending or receiving data
__
PoE
| __
Yellow
| Off| No device is connected to the port
On| The connected device is receiving PWR
Power
Use the included power cord to connect the device (on the rear panel) to an AC outlet. Confirm that the power LED on the front panel is lit.
Installation
Prior to use, it is recommended that the switch be placed/positioned:
- on a level surface that can support the weight of the switch
- with at least 25 mm (approx. 1”) of clearance for ventilation;
- away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
- within 100 m (approx. 328’) of network devices it’s to be connected to.
Chassis Ground Column (Rear Panel)
Wire the grounding terminal to an earth-grounding object to prevent power
spikes.
Rackmount
The switch includes brackets and screws for optional rack mounting.
- Disconnect any cables from the switch.
- Position a bracket over the mounting holes on one side of the switch and secure it in place with screws.
- Repeat Step 2 on the other side of the switch.
- Position the switch in the rack and screw the brackets to the rack. 5 Reconnect any cables.
For specifications, visit intellinetnetwork.com. Register your
product at register.intellinet-network.com/r/560993 or scan the QR code on the cover.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DISPOSAL OF ELECTRIC AND ELECTRONIC
EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate
Collection Systems)
This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.
WARRANTY INFORMATION
REGULATORY STATEMENTS
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment to an outlet on a circuit different from the receiver; or consult the dealer or an experienced radio/TV technician for help.
This device complies with the requirements of CE 2014/30/EU and/ or
2014/35/EU. The Declaration of Conformity for is available at:
support.intellinet-network.com/barcode/560993
- North America IC Intracom America 550 Commerce Blvd. Oldsmar, FL 34677 USA
- Asia & Africa IC Intracom Asia 4-F, No. 77, Sec. 1, Xintai 5th Rd. Xizhi Dist., New Taipei City 221 Taiwan
- Europe IC Intracom Europe Löhbacher Str. 7, D-58553 Halver Germany
All trademarks and trade names are the property of their respective owners.
All trademarks and trade names are the property of their respective owners. ©
IC Intracom. All rights reserved.
Intellinet Network Solutions is a trademark of IC Intracom, registered in the
U.S. and other countries.
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product – Intellinet Solutions
- DropCatch.com
- Intellinet Network Solutions Account and Product Registration