GLEDOPTO GL-SN-002 Ambient TV Backlight Kit Instruction Manual

GLEDOPTO AMBIENT TV BACKLIGHT KIT

USER INSTRUCTION

PRODUCT DESCRIPTION

The gledopto ambient tv backlight kit processes the HDMI signal to make the connected LED strip to change color or brightness synchronously with the TV screen. The light strip can display different colors around the TV screen.

PRODUCT PARAMETER

PACKING LIST

1. 1M HDMI Cable x 1
2. 12V Power supply x 1
3. HDMI SYNC Box x 1
4. 12V 2m RGB strip x 2
5. User Instruction x 1

INSTALLATION DIAGRAM

INSTALLATION FLOW CHART

NOTICE:

1. The length of the light strip should not exceed the edge of the TV.
2. Need to cut off the excess light strips before powering on.

INSTALLATION DIAGRAM

FUNCTION DIAGRAM

1. RESET BUTTON
   Long presses the “RESET” button until the network indicator consistently flashes.

2. MICROPHONE
   Receive external audio and realize the color change of the light strip

3. WIFI SIGNAL LIGHT
   When you press and hold the reset button to enter the ‘reset” mode, the light starts to flash and you can start the setting.

4. MODE LIGHT
   Indicator color, default mode: red, sound mode: green, scene mode: blue.

5. POWER LIGHT
   Bright white light when power on

6. OUTPUT INTERFACE
   Connect the output interface to the TV, projector, or monitor screen with an HDMI cable.

7. INPUT INTERFACE
   Connect the output interface to the PS, Switch, and other games devices, computers, laptops, TV boxes, and other HDMI devices.

8. SIDE USB INTERFACE

9. BOTTOM USB INTERFACE

10. POWER CONNECTOR
    Just plugs the power cord into the interface.

DETAILED DESCRIPTION

STEP1

1. Download the “Smartlife” APP and log in to your account.
2. Click “+” in the upper right corner, then click ‘Lighting” in the list on the left, click “WIFI”, and follow the interface prompts to add light strips.

STEP2
Click “light strip’ to enter the setting interface. Select the corresponding mode according to the surrounding direction of the pasted light strip (the interface can slide left and right)

STEP3
After the selection is complete, click “DONE’ to complete the setting.
Note: If the color is not correct, you can try to unplug the backlight box and then plug it in again. MODE SWITCH
Click on ‘Video’ in the menu to select and set in the “Picture” and ‘Music” options.
Click on ‘Taste” in the menu to select the appropriate scene mode. SUPPLEMENT
If you want to reset the direction of the light strip, you can click ‘Setting’ in the menu, select the paired light strip, and click to enter the setting
NOTICE

1.  The sync box can support up to 4K/30P sources. If you need to use it to display higher-level sources, you can use a Selector Switch Boxes to convert it.
2. You can reset to restore to the factory setting to start again if there is any problem or failure in connection.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>