Anmossi TY-DMD-8PCS Solar Ground Lights Instruction Manual
- June 17, 2024
- Anmossi
Table of Contents
Anmossi TY-DMD-8PCS Solar Ground Lights Instruction Manual
Specification:
Material: PP,PC,Stainless steel
Size: 11.5×13.5cm
LED: 12 LEDs
Battery: Ni-MH
Product Contents:
- Solar light
- Split ground stake (short)
- Sharp end ground stake (long)
Installation:
- Push the button once to activate the light.
- Align the 2 pins of the split ground stake to the 2 holes on the back of the solar light and then push the split ground stake firmly onto the solar light.
- Align the 2 pins of the sharp end ground stake to the 2 remaining holes on the back of the solar light. Push the sharp end ground stake through the slot of the split ground stake onto the solar light.
- Flip the solar light so that its solar panel side faces up.
- In your garden, find a soft ground where the solar panel can receive direct sunlight.
- Insert the combined ground stakes into the soil to fix the light.
- The solar light turns on at dusk and off at dawn automatically.
Note: If you will not use the product for a long period of time, pull it up, push the button again to deactivate it, disassemble it and then store it.
Read User Manual Online (PDF format)
Loading......