GLEDOPTO GL-S-004P ZigBee Pro Indoor Lights Instructions
- October 30, 2023
- GLEDOPTO
Table of Contents
INDOOR PRODUCT PRO
User Instruction
GL-S-004P ZigBee Pro Indoor Lights
Features:
Gateways/hubs Gledopto zigbee products Directly work with: HUE, Amazon echo
plus, SmartThings, Homee etc Via Hue gateway, can work with google home, all
other alexa devices
App work with Hue gateway:
Hue, hue essential, hueparty, hue Disco, iConnectHue, Hue Widget, Light DJ,
etc
Work with Home Assistant:
http://bitly.ws/dELh
Work with Homekit:
http://bitly.ws/ejZY
Sync effect with screenbloom:
Sync your lights with movies, music, and games, Enjoy the lighting effect
which synchronizes with the plot of the picture immediately,and experience the
more delicate atmosphere lighting effect.
How to sync?
Please follow this website: http://www.screenbloom.com/
Sync Show Demo: https://youtube/zZjtJMy_774
Q&A or more info,please go to: www.gledopto.com or email to [email protected], or https://www.reddit.com/r/Gledopto_Support
RGB+CCT Remote Control (c1-Rc-006z)
This manual describes RGB+CCT remote control used for our RGB+CCT products Remote control can control the LED lights up to six different Zones, change the color, dim/brighten the lights, warm/cool white, different programs. In this manual, you will learn.
Battery Installation
Please take the remote control and carefully press the battery cover and
push it away in a downward motion. Install two AAA batteries, exactly match
the negative (- ) pole of each battery to the largest spring. Don’t touch the
color ring when you install the batteries. Place the battery cover back and
install tightly.
LED-Trading Tobias Ebert
Schoeneicher Str. 42, Schoeneiche b. Berlin, Germany, 15566
0049 30 64168917 [email protected]
How to link & use with remote control
- Within 3 seconds after the light power on, click the “on” button in the group to perform code matching. The LED light turns green means successful code matching.
- Long prees the “off” button of the remote control to enter the night mode, and the brightness and color can still be adjusted at this time.
- Long prees the small moon key to enter the 60 seconds delay shutdown state.
- Click the “M” key to enter automatic mode.
How to unlink
- Within 4s of powering on the light, press the “main on” button 5 times continuously, and the light flashes, indicating that the light is unpaired from all the remote controls that have been coded, and will not be controlled by any remote control.
- Within 4s of powering on the light, press the paired “group on” button 5 times continuously, and the light flashes, indicating that the light is unpaired from the remote control and will not be controlled by the remote control. Other paired remote controls can still be controlled.
Mode description
Mode 1: Static warm light (warm light alone)
Mode 2: Static white light (cold light and warm light are equally bright)
Mode 3: Static cold light (cold light alone)
Mode 4: Static red light
Mode 5: Static green light
Mode 6: Static blue light
Mode 7: RGB fade in fade out (Color fade in fade out from red to green, then
to blue, then to red, and so on, speed adjustable.)
Mode 8: RGB flash (Color flash from red to green, then to blue, then to red,
and so on, speed adjustable.)
Mode 9: Color breathing (In this mode, the brightness of current color will
cycle from from 100%-0%, then from 0%-100%. At the same time, you can switch
the color and have a cycle repeatedly. Pressing switch /mode button to exit
this mode.)
How to link & use with zigbee hub
These devices works with many ZigBee Light Link /ZigBee 3.0 Gateways like
Philips Hue, Amazon Echo Plus or SmartThings.
Installation:
- Turn off the Power.
- Plug in the Bulb.
- Now you can connect it with the gateway.
Connection with Gateway:
- Start the device searching on the ZigBee Light Link/ZigBee 3.0 Gateway, it could take some time.If the Gateway does not find the device, plug power off/on or make a reset.
- After finding the device, the light will turn green,then you can save it to the rooms/groups.
- Now you can use the device.
Reset:
- Switch on your device.
- Now switch off and on within 2 seconds.
- Repeat off/on five times.
- Reset is done when the device is switched on in the fifth time and the LED light will be fully bright and flashing for 4 times.
Compability Chart
①②③④⑤⑥ are already tested by GLEDOPTO, ⑦⑧ are from our customers, just for your information, not verified by GLEDOPTO.
RGB+CCT Spotlight
Parameter
| Product model | GL-S-004P | GL-S-006P |
|---|---|---|
| Input voltage | AC/DC12V(MR16) | AC100ri240V(GU10) |
| Power | 4W | 5W |
| Color temperature | 2200-6500K | |
| Luminous Flux | 250—’300LM | 300-450LM |
| Beam angle | 25° | 30° |
| Housing | Aluminum+Plastic | |
| Working Temp | -20°C-60°C | |
| CRI | >80 | |
| LED Quantity | 1.5W RGB 5050 2pcs | |
| 1.0W 3030 6pcs | 1.5W RGB 3030 2pcs |
1.0W 3030 8pcs
Features:
- Compatible with ZIGBEE hub,APP control,Voice control.
- Wireless 6-Zone touch remote control,control distance at least 20 meters.
- 16 million colors change,dimmable from 1% to 100%.
- Color temperature from 2200K to 6500K.
- Saturation control——Whhite and RGB.
- 60s off delay.
Attention:
- Link the lightbulb with the remote control or the smart phone App before use.
- Make sure the voltage is between AC100~240V or AD/DC12V.
- Avoid using under high temperature or moisture.
- Make sure the power is off before intallation.
RGB+CCT Bulb
Parameter
Power:6W
Baes:E27/E26/B22
Input Voltage: AC 100~240V
Color temperature:2200-6500K
Luminous Flux:500-550LM
Light Efficiency:90LM/W
Life span:50000h
Working Temp:-20~60 degrees
Material: Aluminum housing+PC Cover| Power:12W
Baes:E27/E26
Input Voltage: AC 100~240V
Color temperature:2200-6500K
Luminous Flux:900-1100LM
Light Efficiency:3OLM/W
Life span:50000h
Working Temp:-20~60 degrees
Material: Aluminum housing
---|---
Parameter
Power:4W
CRI:>80
PF:>0.5
Lifespan:50000 hours
Input voltage : AC100~240V
Color temperature:2200~6500K| Luminous Flux : 250~300LM
Working Temp : -20°C~60°C
Housing : Plastic + Aluminum
Size : ®37.5103.5mm(E12) ©37.5110mm(E14)
---|---
LED Filament Bulb
Parameter
Power: 7W
Shape: ST64
Model: GL-B-002P(S)
Size: 664x142mm
N.W.: 47.0g
G.W.:89.4g
Input Voltage: AC 220~240V
Input Current: 6@mMA Max 50Hz
Color Temperature: 1800k~6500k
Luminous Flux: 520LM~680LM
Working Temp: -20°C~45°C
Zigbee Distance: >50m
RF Distance: >30m
CRI: >80
Material: Aluminum+Glass| Parameter
Power: 7W
Shape: ST64
Model: GL-B-002P
Size: 064x142mm
N.W.: 45.3g
G.W.:87.7g
Input Voltage: AC 220~240V
Input Current: 6(0mA Max 50Hz
Color Temperature: 2200k~6500k
Luminous Flux: 800LM
Working Temp: -20°C~45°C
Zigbee Distance: >50m
RF Distance: >30m
CRI: >80
Material: Aluminum+Glass
---|---
| Parameter
Power: 7W
Shape: A60
Model: GL-B-003P(S)
Size: 060x105mm
N.W.: 37.4g
G.W.: 68.6g
Input Voltage: AC 220~240V
Input Current: 6(OmMA Max 50Hz
Color Temperature: 1800k~6500k
Luminous Flux: 520LM~680LM
Working Temp: -20°C~45°C
Zigbee Distance: >50m
RF Distance: >30m
CRI: >80
Material: Aluminum+Glass
---|---
| Parameter
Power: 7W
Shape: A60
Model: GL-B-003P
Size: ®60x105mm
N.W.: 35.7g
G.W.: 66.9g
Input Voltage: AC 220~240V
Input Current: 6(0mA Max 50Hz
Color Temperature: 2200k~6500k
Luminous Flux: 800LM
Working Temp: -20°C~45°C
Zigbee Distance: >50m
RF Distance: >30m
CRI: >80
Material: Aluminum+Glass
Parameter
Power: 7W
Shape: G95
Model: GL-B-004P(S)
Size: 095x142mm
N.W.: 61.2g
G.W.: 119.0g
Input Voltage: AC 220~240V
Input Current: (OMA Max 50Hz
Color Temperature: 1800k~6500k
Luminous Flux: 520LM~680LM
Working Temp: -20°C~45°C
Zigbee Distance: >50m
RF Distance: >30m
CRI: >80
Material: Aluminum+Glass| Parameter
Power: 7W
Shape: G95
Model: GL-B-004P
Size: 095x142mm
N.W.: 59.52g
G.W.: 117.3g
Input Voltage: AC 220~240V
Input Current: 6(0mMA Max 50Hz
Color Temperature: 2200k~6500k
Luminous Flux: 800LM
Working Temp: -20°C~45°C
Zigbee Distance: >50m
RF Distance: >30m
CRI: >80
Material: Aluminum+Glass
---|---
Power on status:
Power on and off for 3 times and the light will flash for 2 times, then the
light will remember the on/ off status. Repeat the operation again to cancel
this function, the light will be on by default when powered on.
This function only applies to Filament Bulb.
RGB+CCT Downlight
| Power: 6W
Hole Size: 100~110mm
Light efficiency: 95LM/W
Luminous Flux: 470~570LM
---|---
| Power: 9W
Hole Size: 100~110mm
Light efficiency: 85LM/W
Luminous Flux: 600~750LM
| Power: 12W
Hole Size: 140~150mm
Light efficiency: 1OOLM/W
Luminous Flux: 1000~1200LM
Parameter
CRI: >80
PF>0.5
Lifespan: 50000hours
Beam Angle: 120°| SDCM: <5
Input Voltage: AC 100~240V
Color temperature: 2200~6500K
Material: Aluminum+PC Cover
---|---
- Please open the hole on the ceiling according to the correct size of Diagram 1.
- Push in the two spring elements, make sure that they are deployed and anchored on the back of the ceiling Diagram 2 and 3.
- Connect the driver properly according to the wire connection Diagram 4.
RGB+CCT Downlight (IP54)
| Power: 6W
Hole Size: 80mm(3.15in)
Light efficiency: 60LM/W
Luminous Flux: 280~350LM
---|---
| Power: 12W
Hole Size: 95mm(3.74in)
Light efficiency: 67LM/W
Luminous Flux: 660~800LM
Parameter
CRI: >80
PF>0.5
Lifespan: 50000hours
Beam Angle: 60°| SDCM: <5
Input Voltage: AC 100~240V
Color temperature: 2200~6500K
Material: Aluminum+PC Cover
---|---
RGB+CCT Downlight (CRI>90)
| Power: 6w
Hole Size: 60mm(2.36in)
Light efficiency: 52LM/W
Luminous Flux: 270~370LM
---|---
Parameter
CRI: >90
PF>0.5
Lifespan: 50000hours
Beam Angle: 60°| SDCM: <5
Input Voltage: AC 100~240V
Color temperature: 2200~6500K
Material: Aluminum+PC Cover
---|---
- Please check whether the input voltage of the constant voltage power supply is in accordance with the Lamps, and please check the connection of both the cathode and anode.
- The working Voltage is AC100-240V, the Lamps will be broken if the voltage is higher than 240V.
- Non-professional user cannot dismantle the Lamps directly, otherwise, it may cause fire and electric shock.
- The working temperature is -20~45°C; Do not use the device to direct sunlight, moist and other high temperature area.
- Please do not use Lamps around the mental area and high magnetic field, otherwise, it will badly affect the Use effect.
Disclaimers
- This manual may contain inaccuracies or discrepancies of the product operations, or typographical errors. Our company will update the contents of this manual according to the improvements and changes of product functions, and regularly improve and update the software and hardware of products described in this manual. The updates will be shown in the latest edition of this manual without further notice.
- Due to the continuous adoption of new technologies by our company, the product parameters will be changed without any notice in prior.
- This manual is only for reference and guidance for customers. It does not guarantee that it is completely consistent with the actual product. The actual application is subject to the actual product.
- The parts, components and accessories mentioned in this manual do not represent the standard configuration of the product. The detailed configuration is subject to the packing list.
- All texts, tables and pictures in this manual are protected by the relevant national laws, and may not be used without permission by supplier.
- The copyright and right of the final interpretation of this manual are reserved by our company.
GL-IP-I-001 vi9