GLEDOPTO GL-RC-009 2.4G RF RGB CCT Remote Light Switch User Manual
- June 10, 2024
- GLEDOPTO
Table of Contents
GLEDOPTO GL-RC-009 2.4G RF RGB CCT Remote Light Switch
Product Feature
This remote control has the worldwide universal 2.4Gh frequency and GFSK control mode. It’s obvious advanced in low power consumption, long transmission distance, strong anti-interference and fast communication rate. It can dim the light color, color temperature, saturation and brightness for the smart light.
Product Presentation Diagram
Product Parameter
- Model NO.: GL-RC-009
- N.W : 63.3g
- Programs: 9 kinds
- Size : 157×53×18mm
- Transmitting Power : 6dBm
- Modulation Method : GFSK
- Material: PC
- G. W: 76.0g
- Standby Power: 15uA
- Control Distance: 30m
- Working Temperature: -20°C-60°C
- Input Voltage: 3V (2*AAA Battery)
Key Function Description:
- Color ring: Touch the color ring to change the light color.
- Color temperature / saturation bar: Change the color temperature in CCT mode; Adjust the color saturation in RGB mode.
- Brightness bar: slide on the brightness bar to dim the brightness.
- W: Press this button to switch into CCT mode.
- Master Turn-on: turn on all the connected device.
- Master Turn-off: turn off all the connected device.
- M: Mode switching button.
- S+: Speed up the dynamic mode of the M mode.
- S-: Speed down the dynamic mode of the M mode.
Pairing & Un-pairing
The light must be paired with the remote control before controlling.
Pairing method
Power off the light more than 10s, then power on. Ensure that the light is completely powered off.
- Short press button ON from 1~8 groups within 35 when light powers on, (RF series: light turning white and flickering 3 times means paring successfully; PRO series:and the LED light turns green, indicating the Pairing successfully.)
- If it fails to pair, follow the above steps again.
Note:
- One light can be paired by four remote controls at max. When the fifth remote control is paired successfully, the first paired remote control will automatically fail.
- One lamp can be paired with any group among the 1-8 groups in the remote control. When it’s paired with one of them, it can not be paired with the other group in the remote control.
Un-pairing method
Power off the light more than 10s, then power on. Ensure that the light is completely powered off.
PRO series:
- If the LED is connected to ZigBee hub, short press 5 times the button ON of the remote within 3 seconds after the light is powered on, and the LED will blink 3 times under the existing color.
- If the LED not connected to the ZigBee hub, short press 5 times the button ON of the remote within 3 seconds after the light is powered on, and the LED will blink 3 times until fully bright.
RE series:
Within 3 seconds after the light powered on, short press 5 times the button ON
of the zone paired on the remote. light turning white and flickering 9 times
means un-pairing successfully.
Attention
- If the indicator light flashes quickly when using, please replace the battery. Do not use poor quality batteries to avoid the battery liquid leakage to damage the remote control.
- This 2.4G remote control is a precision electronic product. Keep away from the damp, high temperature, dust, and high-pressure environment. Please use in dry without static electricity indoors.
- Do not use the remote control in an area full with metal or strong electromagnetic waves, otherwise, it seriously affects the control distance.
Disclaimers
- This manual may contain inaccuracies or discrepancies of the product operations, or typographical errors. Our company will update the contents of this manual according to the improvements and changes of product functions, and regularly improve and update the software and hardware of products described in this manual. The updates will be shown in the latest edition of this manual without further notice.
- Due to the continuous adoption of new technologies by our company, the product parameters will be changed without any notice in prior.
- This manual is only for reference and guidance for customers. It does not guarantee that it is completely consistent with the actual product. The actual application is subject to the actual product.
- The parts, components and accessories mentioned in this manual do not represent the standard configuration of the product. The detailed configuration is subject to the packing list.
- All texts, tables and pictures in this manual are protected by the relevant national laws, and may not be used without permission by the supplier.
- The copyright and right of the final interpretation of this manual are reserved by our company.
LED-Trading Tobias Ebert
Schoeneicher Str. 42, Schoeneiche b. Berlin, Germany, 15566 0049 30 641 689 17
info@led-trading.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>