COSTWAY MU10072 Kid Drum Set User Manual
- June 5, 2024
- COSTWAY
Table of Contents
COSTWAY MU10072 Kid Drum Set User Manual
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
Follow Costway
Contact Us!
Do NOT retum this item.
Contact our friendly customer service department for help first.
Before You Start
Please read all instructions carefully and keep it for future reference.
WARNING
Attention: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materlals for this product away
from babies and children, otherwise they may pose a choking hazard.
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.
General Warnings:
- The product must be installed and used under the supervision of an adult.
- Read through each step carefully and follow the proper order.
- Remove all packaging, separate and count all parts and hardware.
- Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
- We recommend that, where posslble, all Items are assembled near to the area In which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Ensure a secure surface during construction, and place the product always on a flat, steady
and stable surface.
PARTS
- Bass Drum
- Bass Drum Heads
- Bass Drum Hoops
- Bass Drum Tension Rods
- Bass Drum Spur
- Bass Drum Pedal
- Tom Tom
- Snare Drum
- Tom Arms
- Cymbal Holder
- 20,5cm Cymbal
- Drum Throne Base
- Drum Throne Surface
- Drum Key & Spare Parts
- Drum Stick
Step 1: Place the Bass Drum(l) flat on the floor to attach the heads(2) and hoops(3). Place one of the hoops(3) over the top of the drum head so that the head is sandwiched between the hoop and the shell.
Step 2: Hand tighten the tension rod with drum key (14) into the lug; repeat all the way around the drum.
Step 3: Insert one bass drum spur (5) on each side and push it fully into the
leg bracket and lightly tighten the wing nut on bass drum to stop the leg from
falling out;repeat the other spur on the drum.
Step 4: Fit the pedal (6) to the hoop by slipping it over the trailing edge of
the hoop and tightening the wing nut that is underneath the footplate. The
beater should be pushed into the pedal and tightened so that the beater
strikes the drum head near its centre.
Step 5: The tom arms (9) need to be inserted into the tom arm bracket which is
on the top of the bass drum. Note:The longer one is for tom tom(7),and the
shorter one for snare drum(S). Make sure that the longest part of the arms fit
into the bass drum to avoid later difficulties with tom height adjustment.
Tighten the bracket’s nut with T-handle to ensure that they are locked and
safe. Use the drum key to tighten the lock above the bracket again.
Step 6: Insert the cymbal holder(lO) into the last hole.Tension the T-rod.
Step 7: Insert the tom tom (7) by sliding it onto the longer tom arm,and the
snare drum(8) sliding it onto the shorter tom arm.
Step 8: Place the cymbal (11) on top of one of the cymbal felts, then place
the second felt on top of the cymbal. Tighten them with the the wing screw.
Step 9: Expand the drum throne base (12) on the floor and tighten it with the
T-handle. You can change the location of the T-handle to different holes when
you need to adjust the height.
Step 10: Put the drum throne surface ( 13) on the drum throne base (12) you
have just assembled well. Tighten them with the T-handle and you are ready to
play!
Note: After the assembly is completed. there will be a small amount of
accessories left. Please keep them well to replace the broken parts in the
future.
Welcome to visit our website and purchase our quality products!
With your Inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fortana, California
UK office: lpswlch
We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>