globe 65539 Smart Floor Lamp Instruction Manual

Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enjoyment.

SMART FLOOR LAMP
Check out the installation video on our website: globeelectric.com/smart

SAVE THESE INSTRUCTIONS

CAUTION IMPORTANT
SAFETY INSTRUCTIONS
Most electrical accidents are caused by carelessness or ignorance. If you combine a basic knowledge of electricity, a healthy respect for it, and a dose of common sense, you can safely tackle many household electrical repairs. Here are some basic guidelines for working with electricity:
Before working on a circuit, go to the main service panel and remove the fuse or trip the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
Before touching any wire, use a voltage tester to make sure it’s not live.
Whenever you check for voltage in a receptacle, check both outlets – each may be controlled by a separate wiring circuit.
When replacing fuses, turn off the main power first. Make sure your hands and feet are dry and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch a plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.
Use tools with insulated handles and ladders made of wood or fiberglass.
Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
Never disable grounding devices. Make sure that all appliances requiring grounding are properly grounded, and that the electrical system itself is properly grounded.
Meet or exceed all electrical code requirements that cover the work you are doing.
Always work with enough light to see what you are doing; it’s easy to make mistakes when you’re working in dim light.
When in doubt about the safety of any electrical repair or test, call in a professional.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE THE CORRECT BRANCH CIRCUIT CONDUCTOR.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (7) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator &your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt SS standard(s). Operation is subject to the following two conditions: (l) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance
20cm between the radiator &your body.
FCC RESPONSIBLE PARTY
Globe Electric
15301 Shoemaker Ave, Norwalk, CA 90650
www.globe-electric.com

Warranty: This product comes with a 2-year product warranty effective from the date of purchase. If the failure of this product is caused by defects in the material or workmanship, it will be repaired or replaced at no charge to you. You must supply a copy of your dated cash register receipt when you request warranty service. Return the product with your cash receipt as proof of purchase prepaid to Globe Electric Company Inc. Globe reserves the right to repair or replace the product at its option. Repair or replacement, as described above, shall be the sole remedy to the customer and there shall be no liability on the part of Globe for any special, indirect, incidental or consequential damages, including but not limited to any loss of business or profits, whether or not foreseeable. Some jurisdictions may not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any modification to this product or failure to comply with safety instructions will void the warranty.

FEATURES

• LED integrated. Dimmable
• RGB: Choose from a full spectrum of colors
• Tunable white (2000k-5000k): Choose from a focused bright white to a relaxed sunset glow
• On/ Off touch switch
• Manually or remotely control plugged in devices with the Globe Suite app
• Pair with Google Home or Amazon Alexa (sold separately) to control your plugged in devices through voice commands
• Set schedules and control your light from anywhere

SPECIFICATIONS

120 V· 60Hz

PRE-INSTALLATION

Planning Installation
Compare all parts with the “Hardware Included” section. If any part appears missing or damaged, do not install this product and contact the Customer Service team at l-888-543-1388 or e-mail to info@globe-electric.com.
Tools Required
None.
Hardware Included
NOTE: Hardware is not shown to actual size.

INSTALLATION

Stepl
Remove all content from the packaging.
Step2
Insert lamp pole B into the lamp base A and turn clockwise to tighten.

Step3
Insert lamp pole C into lamp pole B, then screw lamp pole D into C, E into D and Finto E. remember to turn clock­ wise to tighten.

Etape 4
Insert the Shade G into lamp pole F and turn clockwise to tighten

Etape 5
Connect the Polarized Plug into the outlet and turn on your floor lamp.

CONNECTING INSTRUCTIONS

Make sure your mobile device is running iOS 9.0/watchOS 2.0/Android 4.4 or higher.

1. Let’s get started!
   • Download the Globe Suite™ app from the App Store or Google Play to your mobile device.
   • Launch the Globe Suite” app.
   • To register, enter your email address. Create a password, then login to the app.
   OR
   • Login if you already have an account.

2. Verify your network
   • Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel.
   • Consult your router documentation for detailed instructions on how to change wireless settings.

3. Scan mode
   • Power on your device.
   • Select the “+” symbol on the top right-hand corner.
   • Follow instructions within the app.
   • If your device is flashing rapidly and fails, try using EZ Mode.
   EZ mode
   • Select the “+” symbol on the top right-hand corner.
   • Select “Manual”.
   • Select your product type and follow the instructions within the app.
   • If the connection fails, try using AP mode.
   AP mode
   • Select the “+” symbol on the top right-hand corner.
   • Select “Manual”.
   • Select your product type.
   • Open the menu on the top right-hand corner and select “AP mode”.
   • Follow the instructions within the app.
   • You’re good to go!

Did you know?
Most modern routers are dual-band meaning they support both 2.4 GHz and 5 GHz channels.
The most common wireless options are:

• Mixed: The router will broadcast both 2.4 GHz and 5 GHz simultaneously under the same SSID. The device will choose which to connect to based on multiple variables (congestion, distance to router etc.).
• 2.4 GHz: Broadcast only on this channel.
• 5 GHz: Broadcast only on this channel.
• Dual 2.4 and 5 GHz using Separate SSIDS: The router will broadcast both channels and user manually decides which to connect to

Since 1932, Globe has taken pride in offering products of the highest quality, and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to offer us your valuable feedback, you may contact us in the following ways:
Toll Free Telephone: 7-888-543-7388 (North America Only) /Toll Free Fax: 7-800-668-4562 (North America Only)
E-Mail: info@globe-electric.com
Mail: Globe Electric Customer Service Department
750 Oneida, Montreal, Quebec, Canada H9R 1A8
Please visit our website to discover other quality Globe products: http://www.globe-electric.com   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>