MAXX AIR HVPF16 High Velocity Pedestal 16 Inch Turbo Fan Instruction Manual
- June 5, 2024
- MAXX AIR
Table of Contents
HVPF16 High-Velocity Pedestal 16 Inch Turbo Fan
Instruction Manual
Safety Instructions
This safety alert symbol is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER
Danger indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
WARNING
Warning indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
Caution indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
ELECTRICAL SHOCK
Used to indicate an electrical shock or electrocution hazard.
CAUTION
Read and follow all instructions before operating the fan.
DO not use a fan if any part is damaged or missing.
WARNING
Read and follow all instructions before operating the fan. DO not use a fan
if any part is damaged or missing. To reduce the risk of fire or electrical
shock, do not expose to water or rain. To reduce the risk of fire or
electrical shock, do not use this fan with any solid-state speed control
device. This appliance has a 3-prong plug. To reduce the risk of electrical
shock, this plug is intended to fit in an outlet only one way. If this does
not fit the outlet, contact a qualified electrician. Do not attempt to bypass
this procedure. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or a similarly qualified person in order to
avoid a hazard.
RULES FOR SAFE OPERATION:
Never insert fingers or any other objects through the grille guard when the
fan is in operation.
Disconnect the fan when moving from one location to another.
Disconnect the fan when removing guards for cleaning.
Be sure the fan is on a stable, flat surface when in operation.
DO NOT use a fan in windows. Rain and moisture may create an electrical
hazard.
CAUTION
Do not alter the fan’s assembly.
WARNING
Be sure FRONT and REAR GUARD screws are completely screwed down in locking
position before operation.
Assembly and Operation
MOUNTING THE FAN SUPPORT HOUSING ON A PEDESTAL
- Attach BRACKET POST (4) to BASE (1) with 4 screws and spring washers (2) as shown, tighten securely.
- Loosen the PLASTIC ROUND NUT (5) on the BRACKET POST (4) and extend the INNER TUBE (6) to the desired height.
- Slide the COVER RING (3) down onto the STAND POST (4) and lay it on top of the BASE (1).
CAUTION
THE PLASTIC ROUND NUT (5) must be fully tightened before assembling the
MOTOR (8) to the INNER TUBE (6).
ENGINE AND SUPPORT STATION MOUNTING INSTRUCTIONS
- Locate the MOTOR (8) and insert it into the INNER TUBE (6).
- Align hole in INNER TUBE (6), tighten screw and washer (7) SECURELY.
- Attach two 3-WING PLASTIC KNOBS (9) to the blower to adjust the airflow angle.
TO ADJUST AIRFLOW ANGLE:
Tilt the fan head to the desired angle by loosening THE
SPEED CONTROL:
Turn the SWITCH to OFF (0), HIGH (3), MEDIUM (2), and LOW (1) speeds for the
respective airspeed.
WARNING
CLEANING:
Unplug it from the power source before cleaning it.
- After maintenance, all safety devices (including previously installed.
- Use a soft, damp cloth to clean. Then clean it with a dry cloth.
- Do not use cleaning solutions that are harmful to paints or plastics.
- Do not bend the blades.
- The motor bearings are permanently sealed and do not require additional lubrication.
WARNING
This product is not intended for use by persons (including children) with
reduced physical, sensory or mental capacities, or lack of experience and
knowledge unless they have been supervised or instructed in the use of the
product by a person responsible for their safety. . Children should be
supervised to ensure that they do not play with the product.
If the power cord is damaged, it must be replaced by persons to avoid any
danger.
Parts List
| No. | PART NAME |
|---|---|
| 1 | KNOB |
| 2 | FRONT SWITCH BOX |
| 3 | SWITCH |
| 4 | CAPACITOR |
| 5 | REAR SWITCH BOX |
| 6 | POWER CORD |
| 7 | MOTOR |
| 8 | REAR GRILLE |
| 9 | METAL DRUM |
| 10 | HANDLE |
| 11 | FAN BLADE |
| 12 | FRONT GRILLE |
| 13 | WASHER |
| 14 | KNOB |
| 15 | U BRACKET |
| 16 | INNER TUBE |
| 17 | PLASTIC NUT |
| 18 | STAND POLE |
| 19 | COVER RING |
| 20 | BASE |
| 21 | CABLE |
| 22 | SHORT POLE |
VENTAMATIC, Ltd.
LIMITED WARRANTY STATEMENT
This warranty is underwritten by Falco Insurance Company and is extended to
the original retail
This product is warranted against defects in materials and workmanship for a
period of two (2) years from the date of original retail purchase. No other
parts or components are warranted. There is no warranty for defects caused by
abuse, faulty installation, or the like.
Repairs or replacement parts supplied under this warranty are warranted only
for the period of this warranty; that is, two (2) years from the date of the
original retail purchaser of the unit.
In the event of a defect or malfunction, we will replace or repair the
defective part or component only and return the new or repaired part to you
freight prepaid.
repair or replacement, and the cost of shipping the defective part to us. You
must also bear the cost of repair to or replacement of any part or component
and the shipping charges incurred for the repair or replacement and return to
you of any part or component not covered by this warranty, including parts or
components damaged by you.
The company reserves the right to demand and receive written evidence of the
date of purchase before undertaking its obligations under this warranty. The
right to demand and receive written evidence of the date of purchase extends
to all licensed dealers of Ventamatic, Ltd. products.
You should, therefore, retain your sales slip and attach a copy of it to the
warranty claim.
To start a warranty claim you must: Contact Ventamatic, Ltd.
An RGA (Returned Goods Authorization) form is required for returns to the
factory to ensure your return can be processed efficiently and quickly. Please
contact Ventamatic, Ltd. toll-free at
800-433-1626 or via the web at
www.bvc.com to obtain an RGA and follow the instructions
given.
There is no informal dispute settling mechanism available in the event of a
controversy involving this warranty.
Any and all implied warranties which may exist terminate upon the expiration
of this warranty two (2) years from the date of the original retail purchase.
Some states do not allow limitations on how long an implied warranty lasts, so
this limitation may not apply to you.
Ventamatic, Ltd. is not liable to you for incidental or consequential damages
arising out of defect or malfunction of a unit or its installation or out of
any alleged breach of this warranty. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so this limitation may not
apply to you.
This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
Ventamatic, Ltd.
P.O. Box 728, Mineral Wells,
TX 76068-0728 1-800-433-1626
Fax: 940.325.9311
www.BVC.com
©2021 VENTAMATIC, LTD. 2021 MA HVPF 16 TURBO INSMAN 0521/#1266
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>