MAXX AIR HVPF 30 YOKE Pedestal Fan Owner’s Manual
- June 5, 2024
- MAXX AIR
Table of Contents
MAXX AIR HVPF 30 YOKE Pedestal Fan
SAFETY
This safety alert symbol is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
- Danger indicates an imminently hazardous situation, which,
- DANGER if not avoided, will result in death or serious injury.
- Warning indicates a potentially hazardous situation, which,
- WARNING if not avoided, could result in death or serious injury.
SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
- CAUTION Caution indicates a potentially hazardous situation, which,if not avoided, may result in minor or moderate injury.
- ELECTRICAL Used to indicate an electrical shock or electrocution hazard.
ASSEMBLY AND OPERATING INSTRUCTIONS
CONGRATULATIONS ON YOUR MAXX AIR FAN PURCHASE. With proper care and
maintenance your fan will give
you many years of use.
CAUTION: READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING FAN.
IMPORTANT SAFETY INSTRUCTIONS – READ AND SAVE THESE INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
- Disconnect fan when moving from one location to another.
- Disconnect fan when removing guards for cleaning.
- Make sure fan is on a stable, flat surface when in operation.
- Rain and moisture may create an electrical hazard.
- This appliance has a 3-prong plug. To reduce the risk of electrical shock, this plug is intended to fit in an outlet one way. If this plug does not fit in the outlet, contact a qualified electrician.
- WARNING: Do not use this fan with any solid-state speed control device.
- CAUTION: For general ventilating use only. Do not use to exhaust hazardous or explosive materials or vapors.
- CAUTION: Disconnect the power to the fan before cleaning.
- DO NOT insert fingers or any objects through the grille guard when fan is in operation.
- DO NOT operate fan if any part is damaged or missing.
ASSEMBLY INSTRUCTIONS STAND AND BASE ASSEMBLY
- Remove 5 screws from the base frame (1).
- Place standpipe (3) on the base frame (1) and align holes in the bottom of standpipe (3) with holes in base frame (1).
- Insert screws removed in Step 1 and tighten securely.
- Slide base collar (2) down over the bottom of the standpipe (3).
STAND AND YOKE ASSEMBLY
- Remove bolt and nut (4) from the bottom of the yoke frame.
- Align the upper hole on standpipe (3) with a lower hole in the yoke assembly.
- Insert the bolt and replace nut (4) removed in Step 1.
ADJUSTING THE AIRFLOW
Unplug the unit. Loosen the pivot knobs on both sides of the fan head. Tilt fan heads to the desired angle and tighten pivot knobs. Reconnect unit to the power supply.
USER SERVICING INSTRUCTIONS
- CAUTION: Disconnect the power to the fan before cleaning.
- Use a soft, damp cloth to clean the fan. Remove any residual moisture with a dry cloth.
- Do not use any chemical solution that is harmful to paint or plastic.
- Do not bend the blades when cleaning.
- If the power cord is damaged, it must be replaced by the manufacturer, its agent or authorized service personnel.
- PLEASE NOTE: The motor bearings for this Maxx Air fan are permanently sealed and do not require additional lubrication.
- If you have any questions regarding the operation of your fan, contact us at 800-433-1626.
LIMITED WARRANTY STATEMENT VENTAMATIC, Ltd.
This warranty is underwritten by Falco Insurance Company and is extended to
the original
retail purchaser of this model or, if this unit is purchased and requires
installation by a building contractor, to the original owner of the home. No
subsequent purchaser of the unit or of a home in which it is installed is
entitled to any of the benefits of this warranty.
This product is warranted against defects in materials and workmanship for a
period of two (2) years from the date of original retail purchase. No other
parts or components are warranted. There is no warranty for defects caused by
abuse, faulty installation, or the like.
Repairs or replacement parts supplied under this warranty are warranted only
for the period of this warranty; that is, two (2) years from the date of the
original retail purchase of the unit.
In the event of a defect or malfunction, we will replace or repair the defective part or component only and return the new or repaired part to you freight prepaid.
You must bear all other expenses incurred in obtaining repairs, including
labor required for field repair or replacement, and the cost of shipping the
defective part to us. You must also bear the cost of repair to or replacement
of any part or component and the shipping charges incurred for the repair or
replacement and return to you of any part or component not covered by this
warranty, including parts or components damaged by you.
The company reserves the right to demand and receive written evidence of the
date of purchase before undertaking its obligations under this warranty. The
right to demand and receive written evidence of the date of purchase extends
to all licensed dealers of Ventamatic, Ltd. products.
You should, therefore, retain your sales slip and attach a copy of it to the
warranty claim.
To start a warranty claim you must: Contact Ventamatic, Ltd.
An RGA (Returned Goods Authorization) form is required for returns to the
factory to ensure your return can be processed efficiently and quickly. Please
contact Ventamatic, Ltd. toll-free at
800-433-1626 or via the web at
www.bvc.com to obtain an RGA and follow the instructions
given.
There is no informal dispute settling mechanism available in the event of a
controversy involving this warranty.
Any and all implied warranties which may exist terminate upon the expiration
of this warranty two (2) years from the date of the original retail purchase.
Some states do not allow limitations on how long an implied warranty lasts, so
this limitation may not apply to you.
Ventamatic, Ltd. is not liable to you for incidental or consequential damages
arising out of defect or malfunction of a unit or its installation or out of
any alleged breach of this warranty. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so this limitation may not
apply to you.
This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state. rev. 04/19
Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: 940.325.9311 www.BVC.com