global sources K1182683700 4K Ultra HD Camera User Manual

global sources K1182683700 4K Ultra HD Camera

Note

• Electric Safety
  Installation and operation must accord with the electric safety standards.

•   Use Caution to Transport
  Avoid stress, vibration or soakage in transport, storage and installation.

•   Careful Installation
  The product should be placed on a smooth desktop. The shell of the product is an organic material and is strictly prohibited from contact with any liquid, gas or solid material that may cause corrosion to the shell.

• Do not Unauthorized Disassemble
  This product has no parts which can be repaired by the user. The damage caused by the user’s own disassembly is not covered by the warranty. Specific frequencies of the electromagnetic field may affect the image of the camera!

Supplied Accessories

When you unpack, check that all the supplied accessories are included:

• Camera                    1
• USB Cable               1
• Remote Control       1
• User Manual            1

Quick Start

Please check the connections are correct before starting.

About Product

Features

• 4K Ultra High Definition
  Support 4K ultra-high definition, ultra-high definition with ultra high resolution, the maximum can provide 4K@30fps/25fps image output, while down compatible with 1080P, 720P and other resolutions.

• USB 3.0
  Full function USB 3.0 interface, power supply, video, audio in one, it also can support one channel of the USB video signal source.

• Wide Angle without Distortion Lens
  Wide-angle field of view up to
  84°(Support Auto Focus) / 120°, small lens, wide vision. At the same time, it supports EPTZ, with an unmovable brake, larger, more clear.

• Built-in Microphone
  With a built-in microphone array, you can pick up a full range of sounds, and pick up the sound distance up to six meters. The unique noise suppression algorithm makes your voice perfect.

• Low Light
  The application of 2D and 3D noise reduction algorithm greatly reduces the image noise. Even under the condition of ultra-low illumination, it still keeps the picture clean and clear, and the SNR of image is as high as 55dB.

• Easy Installation
  Standard damping rotary shaft support, suitable for market 100% monitor, easy installation, stable and reliable.

Product Specification

Camera

Sensor

| 1/2.5”, CMOS,

Effective Pixel: 8.29M

Scanning Mode| ****

Progressive

Lens Mount| M12

Lens 1 (optional)

| Lens Focus: f=3.5mm, Wide Angle: 84°

(Support Auto Focus)

Lens 2

(optional)

| Lens Focus: f=2.8mm,

Wide Angle: 120°

Minimal Illumination| 0.5 Lux @ (F1.8, AGC ON)
Shutter| 1/30s ~ 1/10000s
---|---

White Balance

| Auto, Indoor, Outdoor, One Push, Manual, VAR
Digital Noise Reduction| 2D, 3D digital noise reduction
Backlight Compensation| ****

Support

USB Features
Operate System| Windows 7/8/10, Linux, Mac OS
Color / Compression| ****

YUY2/MJPG/H.264

USB Protocol| UVC 1.1
UVC PTZ| Support (EPTZ)
Input/Output Interface

USB Interface

| 1 x USB 3.0: Type B,

female

Physical Parameter
Input Voltage| 5V (USB Power Supply)
Current Consumption| ****

0.6A

Operating Temperature| -10°C ~ 40°C (14°F ~ 104°F)
Storage Temperature| -40°C ~ 60°C

(-40°F ~ 140°F)

Power Consumption| ****

3W

Size

| 194 x 34 x 42mm

(without bracket)

Net Weight| 0.34 Kg

 Interface and Button

Dimension

Remote Control

Key Description

1. Standby Key
   Press this button to enter standby mode. Press it again to enter normal mode.
   Note: Power consumption in standby mode is approximately half of the normal mode.

2. Number Key
   To set preset or call preset.

3. Key
   Used with other buttons.

4.   Preset Key
   Set preset: Store a preset position.
   [SET PRESET] + Numeric button (0-9): Setting a corresponding numeric key preset position.
   

5. HOME Key
   Confirm menu, enter submenu or lens will back to the middle position after pressed it.

6. Return Key
   Return back the last level menu.
   

7. Zoom Key
   Slow Zoom: Zoom In [+] or Zoom Out [-] slowly
   Fast Zoom: Zoom In [+] or Zoom Out [-] fast
   

8. Left/Right Setting Key
   Press with 1 button and 2 button setting the direction of the Pan-Tilt.
   Simultaneously press L/R Set +1 [STD]: set the Pan-Tilt turn the same direction as the L/R Set.
   Simultaneously press L/R Set +2 [REV]: set the Pan-Tilt turn the opposite direction as the L/R Set.
   

9. Focus Key
   Used for focus adjustment.
   Press [AUTO] adjust the focuses on the center of the object automatically.
   Press [MANUAL] adjust the focus on the center of the object manual.
   MANUAL button, and adjust it with [Far](Focus on far object) and [NEAR] (Focus on near object).

10. Selection Key
    Press the button corresponding to camera you want to operate with the remote control.

11. # Key
    Used with other buttons.

12. IR Remote Control Key
    []+[＃]+[F1]: Address 1
    []+[＃]+[F2]: Address 2
    []+[＃]+[F3]: Address 3
    []+[＃]+[F4]: Address 4

13. Reset Key
    Clear preset: Erase a preset position.
    [CLEAR PRESET] + Numeric button (0-9)

14. Direction Control Key
    After zoom, the lens moves in the direction indicated by the arrow. Press [HOME] button to face the camera back to front.

15. Menu Key
    MENU: enter or exit OSD MENU.

16. BLC (Backlight Compensation) Key
    BLC ON/OFF: Press this button to enable the backlight compensation. Press it again to disable the backlight compensation.
    NOTE:
    Effective only in auto exposure mode. If a light behind the subject, the subject will become dark. In this case, press the backlight ON/OFF button. To cancel this function, press backlight ON/OFF button.

17. PTZ Reset Key
    It only applies to the PTZ cameras.

Menu Settings

MENU

Press the [MENU] button to display the main menu on the normal screen, using the arrow button to move the cursor to the item to be set. Press the [HOME] button to enter the corresponding sub-menu.

• Exposure
• Color
• Image
• Noise Reduction
• Setting
• Information
• Restore Default
• Exit

EXPOSURE

Move the main menu cursor to [EXPOSURE], and press [HOME] key enter the exposure page, as shown in the following figure.

• Mode                     Full Auto
• ExpCompMode   Off
• Gain Limit              6
• Backlight      Off
• DRC Strength       0
• Anti Flicker      50Hz
• Return

Mode: Optional items: Full Auto, Shutter Priority, Bright.

Shutter: Optional items: 1/30s, 1/60s, 1/90s,
1/100s, 1/125s, 1/200s, 1/250s, 1/350s,
1/500s, 1/725s, 1/1000s, 1/1500s, 1/2000s,
1/3000s, 1/4000s, 1/6000s, 1/10000s
(Effective only in Shutter Priority mode).
ExpCompMode: Optional items: On, Off (Effective only in Full Auto mode).
ExpComp: Exposure compensation value,
optional items: -7 ~ 7 (Effective only in ExpCompMode item to On).
Gain Limit: Maximum gain limit, optional items: 0 ~ 15 (Effective only in Full Auto, Bright mode).
Backlight: Optional items: On, Off (Effective only in Full Auto, Bright mode).
Bright: Optional items: 0 ~ 17 (Effective only in Bright mode).
DRC Strength: Optional items: 0 ~ 8. Anti Flicker: Optional items: Off, 50Hz, 60Hz (Effective only in Full Auto, Bright mode).

COLOR

Move the main menu cursor to [COLOR], and press [HOME] key enter the color page, as shown in the following figure.

• WB Mode                  Auto
• AWB Sens              High
• RG Tuning       0
• BG Tuning          2
• Saturation        100%
• Hue                 7
• Return

WB-Mode: White balance mode, optional items: Auto, Indoor, Outdoor, One Push, Manual, VAR.
AWB Sens: The white balance sensitivity, optional items: Low, Middle, High.
R Gain: Red gain, optional items: 0 ~ 255 (Effective only in Manual mode).
B Gain: Blue gain, optional items: 0 ~ 255 (Effective only in Manual mode). colortemp: Optional items: 2500K ~ 8000K (Effective only in VAR mode).
RG Tuning: Red gain fine-tuning, optional items: -10 ~ +10 (Effective only in Auto, One Push, VAR mode).
BG Tuning: Blue gain fine-tuning, optional items: -10 ~ +10 (Effective only in Auto, One Push, VAR mode).
Saturation: Optional items: 60% ~ 200%. Hue: Optional items: 0 ~ 14.

IMAGE

Move the main menu cursor to [IMAGE], and press the [HOME] key to enter the image page, as shown in the following figure.

• Luminance                       7
• Contrast                         8
• Sharpness                       3
• Flip-H                  Off
• Flip-V                        Off
• Gamma                      EXT
• Style                            Default
• LDC                          10
• Return

Luminance: Brightness adjustment, optional items: 0 ~ 14.
Contrast: Contrast adjustment, optional items: 0 ~ 14.
Sharpness: Sharpness adjustment, optional items: Auto, 0 ~ 14.
Flip-H: Image flipped horizontally, optional items: On, Off.
Flip-V: Image Flip Vertical,
optional items : On, Off.
Gamma: Optional items: EXT, Default, 0.45, 0.5, 0.56, 0.63.
Style: Optional items: Default, Norm, Clarity, Bright, PC, Clarity (LED), Face. LDC: Optional items: Off, -10 ~ 10.

NOISE REDUCTION

Move the main menu cursor to [NOISE REDUCTION], and press [HOME] key enter the noise reduction page, as shown in the following figure.

• 2D NR      Close
• 3D NR        2
• Return

2D NR: 2D noise reduction, optional items: Close, Auto, 1 ~ 5.
3D NR: 3D noise reduction, optional items: Close, 1 ~ 8.

SETTING

Move the main menu cursor to [SETTING], and press [HOME] key enter the setting page, as shown in the following figure

• Language                      English
• EPTZ                                 On
• Zoom Limit                     3x
• Uvc EXT                        setting

Language: Optional items: English, Chinese, French.
EPTZ: Optional items: On, Off. Zoom Limit: Optional items: 1.5x, 2x, 3x, 4x, 8x (Effective only in EPTZ item to On). Uvc EXT setting: Optional items: Enable or disable the H264, Bulk and Audio.

 INFORMATION

Move the main menu cursor to [INFORMATION], and press [HOME] key enter the information page, as shown in the following figure.

• Version            8.4.062
• Model            O11.V
• Date         2020-03-02

RESTORE DEFAULT

Move the main menu cursor to [RESTORE DEFAULT], and press [HOME] key enter the restore default page, as shown in the the following figure.

Yes
No

Yes: Confirm restore factory settings.
No: Cancel restore factory settings.
Note: Press [HOME] button to confirm, all parameter restore default, include IR Remote Address

Maintenance and Troubleshooting

Camera Maintains

• Use soft cloth to clean camera cover.
• Please use the soft dry cloth to clean the lens. If the camera is very dirty, clean it with diluted neuter detergent. Do not use any type of solvents, which may damages the surface.

Unqualified Application

• No shooting extreme bright object for a long time, such as sunlight, etc.
• No operating in unstable lighting conditions, otherwise image will be flickering.
•  No operating close to powerful electromagnetic radiation, such as TV or radio transmitters, etc.

Troubleshooting

Image

Image have jitter when the camera lens at max-multiple

1.  Check whether the camera installed position be stable.
2.  Check whether have vibrating machinery or object near the camera.

Control
The remote control cannot control the camera

1. Check and replace the new battery for the remote control.
2.  Check whether the camera working mode is correct.
3.  Check whether the address of the remote control can match the camera.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>