COSTWAY FP10017 Countertop Dishwasher 6 Place Setting User Manual
- June 5, 2024
- COSTWAY
Table of Contents
USER’S MANUAL
DISH WASHER
FP10017
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first. Replacements
for missing or damaged parts will be shipped ASAP!
Follow Costway
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
US: cs.us@costway.com
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled. Always place the product on a flat, steady and
stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
IMPORTANT SAFEGUARDS
- Read the user manual carefully before using the appliance. Contact customer service if necessary.
- Do not disassemble the appliance by yourself.
- Plug the appliance into a grounded socket. A grounded socket can reduce the current at most when accidental leakage occurs and can provide users with the most protection.
- Do not use the appliance during thunderstorms.
- The drain pipe should not be hung more than 40cm (15.7″ ) over the appliance. Doing so may cause drain pipe blockage, and water or electricity leakage.
- Check if the appliance is installed well before running the appliance, please check if the water pipes and power cord is connected properly.
- Tableware with sharp ends should be placed downward to avoid hurting users when taking them out.
- Do not operate the appliance if its power cord is damaged, please contact customer service for help.
- Do not keep the door of the appliance open to prevent the appliance from falling due to the imbalance.
- Do not cover the wall socket with any foreign objects. Do not connect the appliance to an outer timer, plug it into a multi-slot socket or a socket that is not grounded. Doing so may cause damage or injuries.
- Dishwasher detergent and polishing detergent should be placed beyond children’s reach due to the danger of children playing or accidentally eating this acidic/alkaline detergent.
- Do not run the appliance in a humid environment in case of triggering electricity leakage or getting rusty.
- Tableware may be hot after washing in the appliance, please remove them around 30 minutes after the procedure ends.
- The appliance runs automatically. Do not inject or pour water into the appliance during working in case of overflowing and causing malfunctions.
- Do not move or tilt the appliance during working in case of triggering water or electricity leakage.
- Do not open the door of the dishwasher in case hot steam in it may get you injured. For putting in or taking out tableware, please press the stop button, open a gap to let out steam, and wait for 10 seconds.
- Children should not play with the dishwasher. Keep them away from the appliance especially when the door of it is open.
- Unplug the plug from wall socket and disconnect the water pipes for not using it for a long time.
- Do not clean the dishwasher with corrosive detergent to avoid damage to the dishwasher.
- Do not use detergents other than exclusive ones for dishwashers.
- Cut the ribbon on the power cord and the water pipe with flat scissors when unpacking the package in case of hurting the pipes and cords.
- Use warm/cold water as a water source. Please use water-rated at 120°F
- Protective plastic bags should be kept from children and cut into pieces for disposal.
Grounding instruction
- This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of an electric shock by providing a path of least resistance to electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug.
- The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
- Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
- Check with a qualified electrician or service representative if you are in doubt about whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
- Please do not use a power strip.
PACKAGE LIST & SPECIFICATIONS
What’s in the package
Name | Quantity |
---|---|
Dishwasher | 1 |
Bowl basket | 1 |
Cutlery basket | 1 |
Injection pipe | 1 |
Ferrule | 1 |
--- | --- |
User manual | 1 |
Drain pipe | 1 |
Screws | 2 |
Specifications
Dimension | 21.7″ x 17.7″ x 19.7″ |
---|---|
Water pressure | 5.8 -145PSI |
Inlet water temperature | 120°F |
Rated voltage | AC 120V |
Current frequency | 60Hz |
Rated power | 870W |
Waterproof level | IPX1 |
Capacity | 6 place setting + 6 serving pieces |
Implementation standards | UL749 |
OVERVIEW
INSTALLATION INSTRUCTIONS
1. The dishwasher can be placed on a flat table or inserted into a cabinet
1.1 In a cabinet:
Dimension diagram(Unit: inch)
Attention:
a. The hole that holds the drainpipe is up to the position of the sewage
system.
b. The material of the cabinet should be heat-resistant and moisture-proof
c. The shade on the side of the cabinet is the recommended area for the hole
holding the drain pie. The hole size should be 2.36″ x 2.36″ which is 15.7″ up
from the bottom of the cabinet.
1.2 Free placement on the table; leave space for opening the door
2.1 Injection pipe installation
The injection pipe connects to the injection valve of the dishwasher and the
corner valve of the pipe or tap. The injection pipe is supplied with the
dishwasher. Attention: Please use the supplied new injection pipe to connect
with tap and valve. The old and damaged pipe may cause water leakage.
2.2 Drain pipe installation
Insertion installation
2.2.1 Put the ferrule on the drainpipe, the pipe onto the corresponding port,
and lock the drainpipe with ferrule.
2.2.2 When inserting the dishwasher into the cabinet, put the drain pipe
through the hole on the wall of the cabinet.
2.2.3 For insertion installation, the top of the drainpipe should be placed
above the water detector port.
2.2.4 Insert the drain pipe into the port of the water detector.
WARNING: Certain internal parts are intentionally not grounded and may
shock only during servicing. Service Personnel — Do not contact the following
parts while the appliance is energized: drain pump.
2.2.5 Do not twist the drain pipe.
2.2.6 When extending the drainpipe, the extended part of it should not be over
5 meters 116.4 ft) in case of affecting the washing effect.
Placing the dishwasher on the table
3. Dishwasher fixation and placement
Installation diagram
3.1 Place the dishwasher levelly in case of triggering overflowing and by
rotating the adjustable electricity leakage. The ventilator screw was placed
on the rug.
3.2 Adjust the balance of the appliance (Rotate clockwise to elevate shown in
the figure should not be and counterclockwise to lower)
3.3 Fix the appliance with screws on both sides after inserting it into the
cabinet and leveling.
1 Remove the lid on both sides of the appliance for putting screws on them.| 2 Put a screw through the fixing hole on the sides of the appliance and fix it onto the plates of the cabinet.| 3 Put lids back on the screws.
Check following conditions after installation:
- Whether the dishwasher is placed levelly and fixed well.
- Whether the power cord is connected and plugged into the grounded socket.
- Whether the drain and injection pipe is connected well.
- Whether protective materials and accessories inside are removed completely.
Kindly reminder:
- Keep the user manual and accessories for further use.
- Every appliance has passed the water test in the factory. It is normal if you found some water left in the appliance. Please feel free to use it. Use the rapid cleaning program 2-3 times before first household use.
OPERATING INSTRUCTIONS
- Control panel use
1.1 Icons on the Control panel
Attention: The power indicator light shines when the appliance is plugged
into a socket under normal circumstances.
1.2 Start an oroaram
** When you want to change the program during dishwasher operation, press
the On/Off to shut down the dishwasher and restart it, then select a new
program.
1.3 Child lock**
In order to prevent children from touching the program button which affects
the normal working procedure, you can press the Child Lock button for 3
seconds to turn on this function. When the Lock icon shines on the control
panel, the rest of the program buttons will be locked until pressing the Child
Lock button for 3 seconds again to unlock them.
1.4 Delay start
1.5 program reference
Program| Applicable scene| Dishwasher detergent powder(g)| Run time
(Hour. Minute)
---|---|---|---
| Suitable for washing tableware with a medium amount of greasy dirt This
program is the energy efficiency recommendation program| 11.5+
11.5| Around
2:25
| Suitable for washing tableware in daily life with less run time| 23| Around
1:10
| Suitable for washing tableware with heavy greasy dirt| 23| Around
2:10
| Suitable for washing tableware with a smooth surface such as glassware| 23|
Around
1:40
| Suitable for rinsing tableware with little dirt and grease/ tableware unused
for a long time.| None| Around
0:25
Tips: To get better washing results when using the Eco program, it is recommended to put ½ detergent powder directly into the interior of the dishwasher and % of it into the contributor.
DETERGENT AND TABLEWARE
-
Detergent powder/ pod (Dishwasher exclusive)
1.1. Function and amount Use exclusive detergent powder and a pod for a dishwasher for removing grease and food residues on the tableware. The amount of detergent depends on the actual conditions of the tableware. If there are many sets of tableware in the dishwasher and too much dirt on them, the recommended amount of detergent powder is 23 gram.
1.2 Detergent use****1. Press the button| 2. Open the detergent| 3. Put a certain amount| 4. Close the detergent powder box on the contributor box of detergent powder/ pod into the box box
Tips: The appliance may emit a sound when the door of the detergent box opens and touches the interior door of the dishwasher during working. It is the common procedure of the appliance and please don’t worry about it.
-
Rinse aid
2.1 Rinse aid use
The rinse aid must be put into the dishwasher for the first use and the amount of it should be around 100 ml. The rinse aid can help dry tableware after washing and make them shine as new. It is consumable which requires adding when the indicator light is on.
Adjust the gear according to the amount of tableware. The higher the gear is, the more amount of rinse aid will be put into the dishwasher. Switch down the gear and run the rapid wash if high gear results in an extra smooth coating on the tableware. -
Bowl basket use
Attention: Do not pile up tableware in case of edges are stacked up to result in blocking water from the spray arm. -
Types of tableware
Applicable for: ceramic tableware, glass tableware, and stainless steel tableware. Tableware which is often used in daily life can all be washed by the dishwasher. But different types of detergent and different temperatures may have various influences on tableware made of different materials.
Other types of tableware:
• Precious metal, color ceramic glaze, and aluminum tableware: The coating of these types of tableware may become abrasive after cleaning in the dishwasher.
• Wooden tableware: Easy to deform and get broken at high temperatures.
• Plastic tableware: Please refer to the instructions for tableware in case of plastic tableware may get deformation easily after heating.
• Cleaning cloth: May cause the dishwasher to malfunction.
• Metal tableware: May get rusty after washing in the dishwasher.
-
Tableware placement
• Large residues such as bones, fishbone and vegetable leaves, etc on the tableware should be removed before putting tableware into the dishwasher
• Do not pile up the tableware, place them one by one into each groove.
• Tableware should be tilted against the basket with dirty spot sides at the bottom which is easy for washing with water. Do not place tableware horizontally or upside down in case of collecting water on them.
• Please stick spoons and forks into the spoon basket.
• Tableware are not supposed to be placed outside of the basket and enter the spinning area of the spray arm. In that case, they may block the spray arm which affects the washing result.
• Do not put extremely tiny tableware into the basket in case it may slip out of the basket and be drained with the dirty water out of the dishwasher.
• When you put the bowl basket back into the dishwasher, make sure the sharp end of the tableware does not damage the door seal.
• Make sure not to touch or clean the coating of the bowl basket with an abrasive tool or sharp ends of objects. In case that bowl basket may get rusty after its coating is damaged.
• Knives and other tableware with sharp ends should be placed horizontally or sharp ends put downward to avoid getting injuries when taking them out of the dishwasher
• After putting the bowl basket into the dishwasher, please rotate the spray arm to check if they can work normally.
MAINTENANCE AND CLEANING
It is recommended that check the interior of the dishwasher and clean it regularly. Use some citric-acid detergent with a wet cloth to clean crevices such as corners under the door seal. For cleaning the interior of the dishwasher, please use dishwasher detergent and refer to the detailed instructions for detergent. Do not use washing powder to replace dishwasher exclusive detergent.
-
Remove the filter cup
1. Rotate the filter cup counterclockwise to remove the filter cup.
2. Remove the stainless steel filter at the same time. -
Rinse
****1 Rinse the filter under the tap after removing the dust on it. It is recommended that use a soft brush for cleaning instead of a steel or stainless brush in case of damaging the stainless part of the system.| 2. Rinse the filter cup and filter with water.| 3. After rinsing the filter cup, put it back to the dishwasher and turn it clockwise to fix it until the triangle sign on the filter cup matches the sign on the stainless filter.
-
Spray arm cleaning
1. After removing the bowl basket, pull the lower spray arm up to get rid of the buckle.
2. Top sprayer, open spiral head of sprayer clockwise
3. Check if there is a blockage on the water outlet of spray arms. If so,
please use a sharp tool to unblock it and try to rinse the outlet with water.
MAINTENANCE GUIDE
- Error code
Error code will be displayed in the screen when the dishwasher malfunctions.
Error code | Possible cause | Potential solutions |
---|---|---|
E01 | Thermistor short circuit | Contact customer service for help |
E02 | Thermistor short circuit | Contact customer service for help |
E03 | The appliance can’t heat the water | Do not place the tableware leveled in |
case they may collect water resulting in the lack of water which fails to heat
in the dishwasher.
E04| Water suction malfunctions| Contact customer service for help
E05| Overflow| 1. Lean the appliance for 30°-45° to empty water in its bottom
and restart.
2. Check if the drain hose is hung too high.
3. Check if the drainpipe is blocked, twisted, or placed under heavy objects.
4. Check if the drainpipe malfunctions.
5. Contact customer service for help.
E06| Abnormal heating| Contact customer service for help
El 0| Abnormal suction| 1. The tap is not open completely.
2. The water flow is slow/ water pressure is low.
3. Being started multiple times under circumstances of lacking water.
4. Contact customer service for help.
- Troubleshooting
Problem | Possible cause | Potential solutions |
---|---|---|
Washing powder/ pods remain in the dishwasher | 1. The water outlet of the | |
spray arm is blocked so that detergent powder can not get rinsed thoroughly. |
Unblock outlet on spray arm and run the dishwasher on Rapid program to rinse
foam on tableware.
2. Too much detergent powder was put or the size of the washing pod is not
small enough.| Run the Rapid program to rinse tableware with water. Put the
recommended quantity of detergent into the dishwasher according to the manual
at the next time.
3. Bad detergent powder/ pod was used.| Run the Rapid program to rinse
tableware with water. Please check if the detergent expires. Or try with other
brands of detergent.
4. Washing powder/ pod was not put into the correct position.| Refer to the
“Detergent adding method”.
Some water and condensation remain in the inside of the dishwasher| This is
normal which won’t affect the result.|
Foam remains in the dishwasher| Too much detergent powder was put or the size
of washing pod is not small enough.| When there is little foam left in the
dishwasher, open the door to make it disappear naturally. When there is too
much foam in the dishwasher, please clean it with tools manually.
Run any programs after removing foam manually for 3 minutes, and repeat this
process until all foam disappears.
Problem| Possible cause| Potential solutions
---|---|---
Tableware is still wet| 1. Tableware is not placed correctly as they may be
stacked up.| Refer to the “Tableware placement introductions”.
2. The washing process has not done yet.| Wait for the process to complete.
3. The program it ran was Rapid/ Fruit.| There is no drying procedure in
these two programs.
4. Did not choose the Preserve function.| To restart the dishwasher and run
the Preserve Program.
The power button does not work| 1. The button does not work while all of the
display icons are not on. The possible reason is that the appliance is not
plugged in or the electricity goes out.| Please plug the appliance it the
grounded, WWI model and make sure Rs voltage corresponds to the mains
2. There is water or oil on the button or hands.| Clean the button or hand
and keep them cty
3. The Child lock function may be on.| Unlock the child lock.
4. Press the button too short.| Press the button for 1 second to start.
not functioning Buttons are tioning except On/Off button| 1. The door
is open.| Make sure the door is shut.
2. Oil or water Is on the finger or button.| Keep your hands and buttons
dry and clean.
3. The Child lock function may be on.| Unlock the child lock.
4. PCB of door lock malfunctions| Contact customer service.
The Faucet icon shines when using the manual injection.| 1. The tap is not
open or the water stops running.| Make sure the tap is on with running water.
2. The flow meter malfunctions.| Contact customer service for help.
3. The injecting valve malfunctions.| Contact customer service for help.
The Faucet icon shines when using the automatic injection.| 1. There is no
water in the water tank or the pipe is not immersed in the water.| Add water
into the container and make sure the pipe is immersed in the water.
2. The filter of suction pipe is blocked.| Clean the filter of the suction
pipe.
3. The flow meter malfunctions.| Contact customer service for help.
It takes much longer to inject automatically.| It is a normal phenomenon of
injecting automatically.|
Impact sounds emit during operating| Inappropriate placement of tableware
causing the spray ann hit with tableware.| Take out tableware and put it back
to the correct position according to the ‘Tableware placement introductions’.
Problem| Possible cause| Potential solutions
---|---|---
Tableware is not cleaned thoroughly| 1. Inappropriate placement of tableware
causes them to pile up.| Refer to “Tableware placement introductions”.
2. The selected program is incorrect.| Select the appropriate program.
3. The detergent is not exclusive to dishwasher detergent or the amount of
detergent is too little.| Use the dishwasher detergent and put the correct
amount of detergent according to the reference.
4. The filter is not installed well hence food residues get into the
filtering system.| Remove the spray arm and check the filter. Install the
filter well and pull the ring firmly.
5. The outlet of the spray arm is blocked.| Unblock the water outlet of the
spray arm.
6. The spray arm is stuck.| Check if tableware is placed inappropriately and
block the spray arms.
7. Food residues dried on the tableware which are hard to remove.| Immerse
tableware in the water for a while before putting them into the dishwasher.
8. There may be power outage during the washing procedure.| Restart the
washing program.
9. Some sort of food is hard to clean such as steamed egg.| It would be
better to clean tableware with steel wool before putting them into the
dishwasher.
There is much water left in the appliance when not in use| 1. The drain pipe
is hung too high.| Please lower the drain pipe.
2. The drain pipe is twisted, blocked, or put under heavy objects.| Unblock
and stretch the pipe, and remove heavy objects from it.
3. The water level in the container exceeds the platform holding the
dishwasher.| The water level in the container should not exceed the platform
holding the dishwasher.
4. The drain pump malfunctions.| Contact customer service for help.
5. The injecting valve malfunctions.| Contact customer service for help.
Welcome to visit our website and purchase our quality products!
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS, and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
- Reward Points
- Exclusive Customer Service
- Personalized Recommendations
- Permanent Shopping Cart
- Order History
5 Star Rating
We would like to extend our heartfelt thanks to all of our customers for
taking time to assemble this product and giving us valuable feedbacks.
THANK You
http://www.costway.com/hysalesrule/qr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>