BASETECH 2299021 ZD-70D Pencil Shape Soldering Iron User Manual
- June 3, 2024
- BASETech
Table of Contents
BASETECH 2299021 ZD-70D Pencil Shape Soldering Iron
Operating instructions
Base tech ZD-70D Pencil Shape Soldering Iron
Item no. 2299021
Intended use
The product is a soldering iron. A grounded power cable provides additional
safety during use. It comes with a soldering iron stand and connects directly
to a mains power outlet.
This product is intended for indoor use only. Do not use it outdoors. Contact
with moisture must be avoided at all costs.
For safety and approval purposes, do not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the
product may be damaged. In addi- tion, improper use can result in short
circuits, fires, electric shocks or other hazards. Read the instructions
carefully and store them in a safe place. Always provide these operating
instruc-tions when passing the product on to a third party. This product
complies with statutory national and European requirements. All company and
product names contained herein are trademarks of their respective owners. All
rights reserved.
Delivery content
- Soldering iron
- Soldering tip
- Stand
- Operating instructions
Latest product information
Download the latest product information at
www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Symbols in this document
- The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric shock.
- The symbol with the exclamation mark in the triangle is used to indicate important information. Always read this information carefully.
Safety information
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
Important safety information
- This device is not intended to be used by persons (including children) with reduced physical, sensory or mental abilities or lack of experience and/or lack of knowledge unless they are supervised by a person responsible for their safety or have received instructions on how to use the device.
- Children should be supervised to ensure that they do not play with the device.
- Cleaning and maintenance work may only be carried out by children if they are under constant supervision.
General information
- This product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. It may become a dangerous play-thing for children.
- Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, steam, and solvents.
- Do not place the product under any mechanical stress.
- If it is no longer possible to operate the product safely, stop using it and prevent unauthor-ised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or has been exposed to considerable transport-related stress.
- Please handle the product carefully. Jolts, impacts, or a fall, even from a low height, can cause damage to the product.
- Consult an expert when in doubt about the operation, safety or connection of the appliance.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
- If you have questions that remain unanswered by these operating instructions, contact our technical support service or other technical personnel
Electrical connection
- The mains socket must be located near to the device and be easily accessible.
- Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains socket using the intended grips.
- For safety reasons, always unplug the device during thunderstorms.
- Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or subjected to mechanical stress. Avoid excessive thermal stress on the mains cable from ex-treme heat or cold. Do not modify the mains cable. Failure to adhere to these instructions may lead to damage of the mains cable. A damaged mains cable can cause a deadly electric shock.
- Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains socket. Never use the product if the mains cable is damaged.
- To prevent risks, damaged power cables may only be replaced by the manufacturer, a professional workshop appointed by the manufacturer, or a similarly qualified person.
- Never connect or disconnect power plugs when your hands are wet.
- Always lay the cables so that nobody can trip over or become entangled in them. Risk of injury.
Usage
- Never touch the barrel or tip of the soldering iron during use. There is a risk of burns!
- Never use the soldering iron to heat up liquids.
- Never solder live electrical components or parts. Always switch off the power before-hand.
- Do not cover or fasten any items to the soldering iron. Otherwise there is a risk of fire.
- Touching or soldering capacitors (or similar components) or leads/cables that are con-nected to capacitors may cause a fatal electric shock! Capacitors may stay charged for several hours after you switch off the power supply!
- Always solder on non-flammable surfaces. Protect other materials nearby from damagethrough heat.
- Risk of fire or explosion! Do not use around or near explosive or flammable materials.
Turn the power off and place the soldering iron on the stand while taking breaks or not using the device.
Work safety
- Only work with sufficient lighting at your workstation.
- Ensure proper ventilation during soldering. Solder or solder flux can be harmful.
- Wash your hands thoroughly after working with solder. This is particularly important when using lead-based solder.
- Do not put soldering alloys into your mouth. Do not eat or drink during soldering.
- Wear suitable protective clothing and safety goggles when soldering. Liquid/splashing sol-der may cause serious burns or eye damage.
- For installations in industrial facilities, follow the accident prevention regulations for electri-cal systems and equipment of the government safety organization or the corresponding authority for your country.
Soldering stand
Do not overbend or adjust the height too many times as this may break the
metal.
Cleaning and care
- Always keep the tip tinned before switching off or storing for any period of time.
- Never clean the tip with coarse, abrasive materials like files.
- If oxide forms on the soldering tip, rub it lightly with sandpaper, wipe it clean and heat it again immediately. Then, tin the tip to prevent re-oxidation of the wettable surface.
- Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause damage to the housing and malfunctioning.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its service life, dispose of the product in accordance with the applicable regulatory guidelines. You thus fulfil your statutory obligations and contribute to environmental protection.
Technical Data
Rated input …………………………….. 230 V/AC, 50 Hz,
Power ……………………………………. 20 W
Heat-up time …………………………… 5 – 10 minutes
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is
prohibited. This publication represent the technical status at the time of
printing.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>