AVE Q26 Smart Watch User Manual
- June 5, 2024
- AVE
Table of Contents
AVE Q26 Smart Watch
Brief Introduction
-
Appearance
-
Charging
-
Strap installation method
-
Packing List
Watch1
User Manual1
Charging base*1 -
Battery Parameters
Type of battery: Lithium polymer battery
Battery model: CH382224
Battery capacity: 200mAh
Charging voltage: 4. 2V
Basic Operations
- Long press the button for 4 seconds to power on or power off, short press to return to main interface.
- On the main interface, press and hold for 3 seconds to switch the dial.
- On the main interface, swipe down to show Bluetooth, battery volume and shortcut menu.
- On the main interface, swipe up to show incoming messages and tap to read the content.
- On the main interface, swipe right to show function list.
- On the main interface, swipe left to show c ommon functions.
APP Download and Installation
-
Scan the QR code as follows or access to major application markets to download and install “GloryFit”.
GloryFit -
After APP has been downloaded, start new user registration or third-party login with basic personal nformation.
-
Start to bind the watch
-
After the watch binding is completed, start function setting in the APP based on individual habits.
Basic Functions
Main interface/dial
Long press for 3 seconds to switch the dial on the main interface
Exercise status
Record current walking steps, distance, calories in real time
Body temperature monitoring
Switch to the body temperature interface to measure the body surface
temperature and actual body temperature in time
Heart rate monitoring
switch to the interface of heart rate monitoring, current heart rate will be
automatically measured, swipe to exit the measurement. Real-time heart rate
measurement can be activated or inactivated in the APP.
Blood oxygen saturation monitoring
Tap on blood oxygen saturation monitoring to start the measurement, the watch
will vibrate to remind measurement completed.
Blood pressure monitoring
The current high and low pressure can be measured in time, and can be
synchronized to the APP
Sleep monitoring
switch to sleep monitoring interface to check the sleep last night. When you
fall asleep by wearing the watch, the deep sleep, light sleep and total
sleeping hours will be automatically recorded.
Weather
When it’s connected to the APP, the weather conditions of that day and next
week will be displayed.
Message reminding
The latest 8 messages will be saved, tap to read or click to delete.
24 sport modes
Tap on the sport mode to enter the sport list, tap on the selected sport mode
to start measurement, swipe right to pause, stop or continue.
DND mode
DND period can be set in the APP, the mode can be activated or inactivated in
the watch
Brightness adjustment
Tap on “+” and “-” to adjust brightness, four levels available
Find Phone
tap on Find Phone and the phone will ring as reminding without lighting up the
screen.
Setting
dial selection, about, shutdown, reset
Music control
Play music on phone, tap to control on watch, pause/play, previous, next
Stopwatch
Tap to access stopwatch and click to start, stopwatch can be paused, continued
or reset.
Countdown
Tap to access Countdown, select time or swipe up to set countdown time
Flashlight
Tap to activate Flashlight mode and swipe right to exit
Other reminding functions:
Incoming call reminding /Message reminding/ Alarm reminding Sedentary
reminding /Goal reaching reminding
Notes:
- Avoid strong impact, extreme heat and sun exposure.
- Do not disassemble, repair or modify the device without authorization.
- This device is charged with 5V 500MA power supply. Over-voltage power supply is strictly forbidden for charging.
- Charging is prohibited in the case of water stains.
- This product can only be used for electronic consumer monitoring instead of medical purposes, the measurement data is for reference only.
Note: The company reserves the right to modify the user manual without any notifications in advance. It’s normal that some functions may be different in specific software versions.