INVISACHARGE SL019 Wireless Charger User Manual
- June 3, 2024
- INVISACHARGE
Table of Contents
INVISACHARGE SL019 Wireless Charger
The InvisaCharge product is designed for charging mobile phones through a surface of 15 to 50mm thickness. It is compatible with all Qi standard mobile phones. It can charge through any non-metal surface, such as wood, plastic, glass, porcelain, granite, Dekton, etc. and support fast charging.
Packing List:
- Wireless charger x 1
- U-shaped tray x 1
- Power adapter x 1
- Desktop Sticker x 1
- Movable Magnet x 1
- U -shaped cardboard with fixed magnet x 1
- Cable Clips x 3
- Anti theft screws x 2
- Manual x 1
INSTALLATION STEPS
- Align the center of the desktop sticker with the center of the U-shaped cardboard by using the two magnets.
- Tear off the paper on the surface of the U-shaped cardboard. Align and stick U-shaped tray to the underside of the countertop
- Remove the U-Shaped cardboard and insert the wireless Charger into the U-Shaped tray. (Screws are Optional)
- Switch on power and place the mobile phone on the top of the desktop sticker to start wireless charging. (Cable clips are optional)
System Parameters:
- Model SL019 Wireless Charger
- Input Voltage/Current: 19V/0.94.A
- Output Power, 10w (Max)
- Valid Charging Distance: 15mm-50mm 5,
- Color: Black
- Frame Material: ABS + PC
- Dimensions: 154mm x 110mm x 10mm
Tips:
- The charger will stop automatically when a metal or other foreign object is in the charging area. Remove the object to continue Charging.
- If charging is stopped with unknown reason, just move the mobile phone away and then place it back in the charging area.
- LED indicator instructions
LED Light | Reason and Indicators |
---|---|
Blue Light Blinking | Standby |
Blue Light Always On | Working |
Red Light Rapid Blinking | Foreign object detected or Phone is to close to |
Charger – Min 3mm
Distance is required
NOTES:
- Please install the InvisaCharge according to the instructions to ensure the proper operation of the charger.
- Please do not install on or near a metal. desk, near metal rails, or screws in the vicinity of charger.
- Do not place any metal objects, including ID card, bank card, bus pass and other digital IC cards, in the charging area.
- To avoid damage, please do not place the device in a wet, hot, or cold environment.
- Please do not place the device directly under the sunlight or close to any heating equipment, such as a microwave oven, roaster and/or water heater.
- Do not disassemble the device or place it in any liquid to avoid damage and/or electrocution.
- Do not toss, press, or puncture the device. High external pressure will cause damage to the device
- Please keep the charging area clean for best charging efficiency.
- The device electromagnetic field may interfere with some implanted medical devices, such as pacemaker, cochlear implant and/or hearing-aid. Please consult InvisaCharge manufacturer if you use such implants at warranty@invisacook.com.
- Please follow the local recycling guidelines when discarding this product
- Please keep the device and accessories out of the reach of children.
- For best performance, please use the accompanied power adapter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>