JBL SCL-1 2-way Dual 12-inch (300mm) Custom LCR Loudspeaker User Guide
- June 5, 2024
- JBL
Table of Contents
SCL-1
2-Way Dual 12-inch (300mm) Custom LCR Loudspeaker
Features
- 2-way dual 12-inch (300mm) Flagship LCR the loudspeaker delivers unparalleled performance in large theater rooms
- Optimized for custom installation behind projection screens and in custom cabinetry
- Timbre matched to all SCL loudspeakers and specially designed to be used with the SSW-1 subwoofer
- Patented D2430K 3-inch (75mm) dual Teonex® annular ring diaphragm, dual voice coil compression driver with dual neodymium motor structures mated to large coverage, HighDefinition Imaging (HDI™) horn precision molded out of Sonoglass®
- Dual 12″ (300mm) cast-frame Carbon Cellulose Composite Cone (C4) woofers in patented Complementary Bass Alignment System (CBAS™) enclosure design
- Bi-amplifier, bi-wire, and network bypass capability with installer configurable crossover
- Heavily braced black vinyl-clad cabinet built from 1-inch thick MDF with cloth-wrapped, edge to edge metal frame grille with magnetic attachment
Specifications
| Type | 2-way in-room loudspeaker |
|---|---|
| Low-Frequency Drivers | Dual 12-inch (300mm) Black Carbon Cellulose Composite |
Cone (C4) cast-frame woofers
High-Frequency Driver| 3″ (75mm) dual annular Teonex® ring-diaphragm
compression driver with dual neodymium motor structures mated to Sonoglass®
HDIT’ horn
Recommended Amplifier Power (Full bandwidth)| 500 WRMS, minimum
Recommended Amplifier Power (80Hz HPF)| 500 WRMS, minimum
Impedance| 4 Ohm
Loudspeaker Sensitivity| 94dB/2 83V/1m
Frequency Response| 40Hz — 24kHz (-6dB), 3rd order LF roll-off
Crossover Frequency| 775Hz
Coverage area, -6dB @ 10kHz| Approximately 120 degrees horizontal x 100
degrees vertical
Coverage area, -6dB @ 20kHz| Approximately 90 degrees horizontal x 70 degrees
vertical
Enclosure Type| Complementary Bass Alignment System (CBAS ‘ )
HF Level Controls| 3 Position – No grille, With grille, or With screen
Grille Dimensions| 47.98″ H x 19″ W x 0.787″ D (1218.7mm x 482.6mm x 20mm)
Product Dimensions| 47.98″ H x 19″ W x 14.49″ D (1218.7mm x 482.6mm x 368.1
mm)
Input Type| Dual sets of gold-plated spring-loaded binding posts
Product Weight| 177.5 lb (80.5kg)
Shipping Weight| 306.5 lb (139kg)
Shipping Units of Measure| Each
Warranty| 5 Years
|
---|---
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.jblsynthesis.com
© 2021 HARMAN International Industries, Incorporated. All rights reserved. JBL Synthesis is a registered trademark of HARMAN International Industries, Incorporated registered in the United States and/or other countries. Features, specifications, and appearance are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>