INVENTUM MK750 Milk Frother Instruction Manual

: June 5, 2024
: INVENTUM

Table of Contents

INVENTUM MK750 Milk Frother
safety instructions
appliance description
before the first use
heating milk
cleaning & maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INVENTUM MK750 Milk Frother

safety instructions

The appliance is intended solely for domestic use within the home.
Attention! Avoid touching hot surfaces, especially the outside of the appliance when the appliance is in use.
Do not exceed the maximum level. By exceeding the filling capacity, the jug may overflow.
Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance.
Never let the power cord of the appliance hang over the edge of a table or counter, touch hot surfaces or become knotted.
Never place this appliance on or near a hot gas or electric burner or where it could touch a heated oven or microwave. Do not allow this appliance to touch curtains, wall coverings, clothing, dishtowels or other flammable materials during use.
Always use the appliance on a secure, dry, level surface.
Never leave the appliance unattended when in use.
Always carry out regular checks of the power cord to ensure no damage is evident. Should there be any signs that the cord is damaged in the slightest degree, the entire appliance should be returned to the Customer Service Department. For your own safety, only use theaccessories and spare parts from the manufacturer which are suitable for the appliance.
For your own safety, only use the accessories and spare parts from the manufacturer which are suitable for the appliance.
Always return the appliance after a malfunction, or if it has been damaged in any manner to the Customer Service Department for examination, repair or adjustment as special purpose tools are required.
Never unplug it from the socket by pulling on the cable.
Always ensure that your hands are dry before handling the plug, switch or power cord.
The appliance is not intended to be operated by means of an external timer or a separate remotecontrol system.
This appliance shall not be used by children from 0 to 8 years. This appliance can be used by children over the age of 8 and above if they are continuously supervised.
This appliance can be used by people with reduced physical, sensory or mental capabilities or lack of experience or knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Keep the appliance and its cord out of reach of children aged less than 8 years.
Cleaning and maintenance shall not be made by children.
Children should be supervised to ensure that they do not play with the appliance.
Unplug the appliance as soon as you have finished using it and when you are cleaning it.
If an extension cord is used, check the marked electrical rating of the extension cord to the electrical rating on the appliance. Make sure that it can not be pulled on by children or tripped over unintentionally.
Should you decide not to use the appliance anymore, make it inoperative by cutting the power cord after removing the plug from the socket. We also recommend making all potentially dangerous parts of the appliance harmless, particularly for children who might be tempted to play with it.
Never use the appliance if it is not working properly, or if it has been damaged. Any intervention other than cleaning and normal maintenance by the customer must be carried out by an approved service centre.
Never immerse any part of the main body, lid, power cord and plug in water or any other liquid to protect against electrical hazards.
If the appliance is used for other purposes than intended, or is it not handled in accordance with the instruction manual, the full responsibility for any consequences will rest with the user. Any damages to the product or other things are not covered by the warranty.

appliance description

Lid with sealing ring
Milk jug
Frothing and heating
Cold frothing
Base with heating element
Maximum indication for heating milk MAX
Maximum indication for frothing MAX
Minimum indication
Mixer (heating)
Whisk (frothing)

before the first use

Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any visible damage, possible from transportation. Place the appliance on a stable and heat resistant surface. Clean the milk jug, the lid, the whisk and the mixer with warmsoapy water. Dry the parts thoroughly. Make sure that the parts are completely dry. Wipe the exterior with a soft damp cloth and dry thoroughly. Thappliance is only suitable heating and frothing milk. Never fill theappliance with other drinks.

preparing milk foam

Check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance and plug the appliance in. Lift the lid and fit the whisk in the jug. Fill the desired amount of milk into the jug. Do not exceed the maximum of the lower max. mark MAX 200 ml. Frothed milk expands and causes the pitcher to overflow if filled up too high. The minimum capacity is 75 ml. Put the lid back on the jug and place the appliance on the base.
Frothing and heating
Press the button to start the preparation. The red control light in the button will light up and the whisk will start turning. Depending on the filling volume, the preparation stops automatically after 90 to 140 seconds. The control light goes out.
Just frothing
Press the button to start the preparation. The blue control light in the button will light up and the whisk will start turning. Depending on the filling volume, the preparation stops automatically after 120 seconds. The control light goes out. After the preparation is completed, remove the lid upwards and pour or ladle the milk foam into a cup or bowl. After having used the frother, clean the appliance as describedin the chapter Cleaning & Maintenance.

heating milk

Lift the lid and fit the mixer in the jug. Fill the desired amount of milk into the jug. Do not exceed the maximum of the top max. mark MAX 400 ml. Put the lid back on the jug and place the appliance on the base. Start the preparation by pushing the button . The red control light will burn and the mixer will start turning. Depending on the filling volume, the preparation stops automatically after 90 to 140 seconds. The control light goes out. After the preparation is completed, remove the lid upwards and pour the hot milk into a cup. After having used the appliance, clean it as described in the chapter Cleaning & Maintenance. Allow the appliance to cool down for 2 to 4 minutes before using it again.

cleaning & maintenance

Before cleaning always unplug the appliance and let it cool down completely. Clean the appliance immediately after every use.Take the milk jug of the base and remove the whisk or the mixerby pulling it straight upwards. Clean the milk jug, the lid, the whisk and the mixer with warm soapy water. Dry the parts thoroughly. Rinse the inside of the milk frother with hot water. Make sure you remove all the milk residue from the inside. It is not hygienic andcan be harmful. The parts cannot be cleaned in the dishwasher. Never immerse the appliance, the power base, the power cord or plug in water or other liquids. Wipe the outside of the appliance with a damp cloth regularly