Delmhorst BDX-30 Navigator Series Moisture Meters User Guide

June 4, 2024
Delmhorst

Delmhorst BDX-30 Navigator Series Moisture Meters

Meter Features

  • Bluetooth app for customizing device and exporting data
  • English, Spanish, French, German, Italian and Russian*
  • Customizable*, color-coded LED’s
  • Built in material, temperature and pin-type correction
  • Adjustable alarm
  • Built in calibration check
  • Compatible with all Delmhorst electrodes
  • Powered by 2 x AA batteries
  • 2 year warranty

Quick Start

  • Turn Meter On and Off
    • Remove tab from inside battery compartment
    • Press any key to wake meter
    • Long press center button to initiate timeout
  • Take a Reading
    • Press Read button from any screen to enter live reading mode
  • Hold a Reading
    • Read button toggles between held and live reading
    • Held readings will blink
  • Save and Export a Reading
    • Press center button to save reading from live or held reading
    • Saved readings will export to EDGETM app when app and meter are connected*

**Delmhorst EDGETM App***

  • Upload readings from meter to app
  • Access to expanded material/species selections, including foreign species sets (applicable meters only)
  • View all readings on a single screen
  • Add timestamp and geotags to readings
  • Exclude outlier readings from statistics
  • Generates plot of all readings
  • Customize LED range
  • Multi-language support for app and meter
  • Export readings to Excel® for additional analysis and report generation

Download the App

Components

  1.  Display Large, easy to read under all conditions
  2.  Read Button Press from any screen to enter live reading mode Press again to toggle between live and held reading
  3.  Navigation Buttons Move between and down into the READ, SET and STATS menus Center button to save readings or changes to settings
  4.  Easy-grip Handle Easily push pins into material ) Colored LEDs Red, yellow, and green LEDs show the relative moisture status Adjustable within the Delmhorst EDGETM App
  5.  Ambient Light Sensor Turns backlight on and off in Auto Backlight mode
  6.  Pins (applicable meters only) Insert integral pins up to 5/16” into material to take reading
  7.  Electrode Connector Connect with any Delmhorst electrode to extend functionality

READ

  • View, hold and save readings
  • Change material/species
  • Adjust alarm set point
  • Set material temperature (applicable meters only)
  • Set insulated vs. non-insulated pins (applicable meters only)

Read Adjustments

  • Up/down to move between
  • Read screen settings
  • Left/right buttons to adjust value

Your Meter

SET

  • Calibration Check: 12.0 +/- 0.2
  • Temperature Units: °F/°C
  • Meter Timeout: 1/4/10 minutes
  • Bluetooth®: ON/OFF
  • Display Brightness: 1-10
  • Backlight: ON/OFF/AUTO
  • Display Contrast: 1-10Delmhorst BDX-30 Navigator Series Moisture Meters 4

Bluetooth® Indicator

  •  Solid
    •  On and connected
  •  Blinking
    •  On and seeking connection
  •  None
    •  Off

STATS

  • Save up to 100 readings
  • Saved readings contain material type, reading value, material temp, and pin type
  • View average, high and low values
  • View last 10 readings

Selection Arrows

  • Left/right to adjust when blinking
  • Center/down to enter current selection

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals