eti Thermadata 4 Channel Data Logger User Guide
- June 5, 2024
- eti
Table of Contents
THERMADATA ® 4 CHANNEL LOGGER
Quick Start Guide
SOFTWARE
Install ThermaData Studio which can be downloaded free from
etiltd.com/tdstudio. For further queries, please contact our technical sales
on 01903 202151 or technical@etiltd.com
Please note: ThermaData 4 Channel Logger is only compatible WITH
ThermaData studio version 6.0.0 and above.
SETTING UP THE LOGGER
-
Connect the Instrument to the PC using a USB C lead.
-
Select the ‘ThermaData® ’ tab from the top menu bar.
-
Select ‘Instrument settings’ option.
-
Select the correct serial number from the drop-down list.
-
Set instrument name
-
Select the High/Low Alarm Limits for each sensor, and set each input name.
-
Turn off any inputs that are not required by unticking the appropriate input.
-
Select a reading interval rate.
-
Choose Instrument Behaviour.
– Untick to disable multiple logs
– Untick to mute audible Alarm -
Select a Start method and fill in the options associated with it.
-
Select a Stop method and fill in the options associated with it.
-
Please note: Start and Stop methods are only available when the instrument is not in multiple log mode.
-
Click the ‘Send Settings’ button and a confirmation window will appear.
-
If a manual START method was chosen, either press ‘Start’ within the Instrument Settings window or press the START button on the instrument. If START AT TIME was chosen then the instruments display will show the time it will automatically start at.
-
With the instrument connected via USB, the status found in the bottom left of the settings window will display the current amount of logs and readings as well as the current condition of the instrument.
BATTERY CHANGE
This instrument is fitted with 3 x AAA Alkaline 1.5V non-rechargeable batteries. Failure to use the same type of battery could result in errors with the instrument.
READING THE LOGGER
- Connect the Instrument to the PC using the USB C lead.
- Open ThermaData Studio.
- Select the ‘Home’ tab from the top menu bar.
- Select the ‘Download’ option.
- Select the correct serial number from the drop-down list.
- A download bar will load across the screen.
- Chose a save file location, rename the file (if required), and select Save.
- A graph and Data Summary will appear within ThermaData Studio.
- To view individual readings, select the ‘Data’ option found in the ‘Home’ tab. For a detailed explanation of all functionality please go to ThermaData Studio and select the ‘Help’ icon in the top right corner.
BUTTON FUNCTIONALITY
| START STOP
• Single Press when LCD display “PrE5 to Strt”
• With multiple log enabled, press for 5 seconds to stop a log.
---|---
| DISPLAY LOCK
• Single Press to switch LCD display from a sensor 1 & 2 to sensors 3 & 4
• Press for 5 seconds to lock the current display.
| MUTE
• Single Press to silence the audible alarm.
Full detailed operating instructions can be found within the ThermaData Studio Software.
GUARANTEE
This instrument carries a two-year guarantee against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of ETI, be either repaired or replaced without charge. This guarantee does not apply to probes, where a six-month period is offered. The product guarantee does not cover damage caused by fair wear and tear, abnormal storage conditions, incorrect use, accidental misuse, abuse, neglect, misapplication, or modification. Full details of liability are available within ETI’s Terms & Conditions of Sale at etiltd.com/terms. In line with our policy of continuous development, we reserve the right to amend our product specification without prior notice.
WARNING: IPA and other solvents may cause damage to the case and screen of this instrument.
ACCESSORIES/RELATED ITEMS
USB-C Interface Lead | 812-510 |
---|---|
Protective Boot & Stand | 830-258 |
AAA Alkaline 1.5V Batteries | 839-924 |
For a full range of Thermocouple Probes, please visit thermometer.co.uk
Manufactured by
Electronic Temperature Instruments Ltd
Worthing · West Sussex · BN14 8HQ
01903 202151 · sales@etiltd.com ·
etiltd.com
545-294/14.07.21
Documents / Resources
| eti
Thermadata 4 Channel Data
Logger
[pdf] User Guide
Thermadata 4 Channel Data Logger, 4 Channel Data Logger, Data Logger
---|---
References
- Buy Thermometers & Digital Temperature Meters - Made in UK - ETI
- ThermaData Studio Software
- Buy Thermometers & Digital Temperature Meters - Made in UK - ETI - ETI Thermometer Shop
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>