Alecto DVC136IP Surveillance Camera User Manual
- June 5, 2024
- Alecto
Table of Contents
Alecto DVC136IP Surveillance Camera
OVERVIEW
- lens cover
- antenna
- infrared LEDs
- indication LED
- light sensor
- lens
- antenna connection
- cabinet
- microphone
- power supply connector
- LAN network connector
- SD card slot
- reset button
- QR-code
INSTALLATION
- Insert a micro SD card (required for firmware updates).
- Connect the LAN network if necessary, or use WiFi.
- Connect the AC adapter to the power socket (5V) of the camera. Wait 2 minutes for the camera to start up.
- Press the reset button until the indicator LED starts flashing.
See Quick Starters Guide for registering the camera to the app.
motion detection
BEWEGINGSDETECTIE – MOTION DETECTION
Voorkom valse melding.
- Verminder de detective 2M gevoeligheid.
- Mijden van 3M boomkruinen, borstels en bladeren uit de buurt van het detectiegebied met een afstand van 3 meter.
- Verwijder kleine en schommelende voorwerpen die het kijkgebied kunnen blokkeren.
- Reduce detection sensitivity. • Keeping treetop, brushes, and leaves away from the 3-meter diameter detection area.
- Remove small and swaying objects that may block the viewing area
DECLARATION OF CONFORMITY
Hereby, Hedo declares that the radio equipment type Alecto DVC136IP is in
compliance with directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://DOC.hesdo.com/DVC136IP-DOC.pdf
Frequentie : 2407 – 2475 MHz
Maximum Vermogen : < 20 dBm
TECHNICAL SPECIFICATIONS.
- Image Sensor :CMOS Sensor
- Display Resolution :1080P (Full HD)
- Lens :4.1mm Glass Lens
- Mini. Illumination :0 Lux (With IR Illuminator)
- Viewing Angle :110º
- Input Built-in :microphone
- Output Built-in :-
- Audio Compressioin :PMC
- Image Compression :H.264
- Resolution :1080P(1920×1080), VGA(640 x 480)
- Flip Mirror Images:flip and mirror adjustable by the user
- Supported Protocol :TCP/IP,UDP, HTTP, HTTPS, SMTP,
- WPA/WPA2
- Wireless Standard :IEEE 802.11b/g/n,
- Bluetooth 4.0 (For Wi-Fi Pairing Only)
- Frequentie range :WiFi(H20): 2412-2472 MHz
- WiFi(H40): 2422-2462 MHz
- Transmitted power:WiFi 18 dBm EIRP
- Date Rate 802.11b :11Mbps (max), 80211g: 54Mbps (max.),
- 802.11n: 150Mbps (max.)
- Wireless Security :AES128, WPA & WPA2 Encryption
- Ethernet:10/100Mbps
- Pan/tilt Angle:-
- Infrared Light:15 IR LEDs, Night visibility up to 5 meters
- Alarm Input / Output :-
- TF/SD card:External up to 128 GB
- (Kingston or Transcend)
- Power Supply : DC 5 V/1.5A (adapter)
- :Kuantan, KT12W050150EU
Power adapter for indoor use only
Shen Zhen Kuanten limited.
The fourth industrial zone Park, Second Building Two Floor 201#, XiTian
Village, Gongming Town, GuangMing New Town, 518106 Shenzhen City, Guangdong,
People’s Republic of China.
- Input voltage : 100-240Vac
- Input frequency : 50/60Hz
- Output voltage constant: 5V
- Output current constant: 1,5A
- Output power constant: 7,5W
- Average active efficiency: 81,85%
- Efficiency at low 10% load: 77,87
- Input power no load : 0,065W
- Operate Temper. :-10°C ~ 50°C (14°F ~ 122°F)
- Operating Humidity :20% ~ 85% non-condensing
- Storage Temper. :-20°C ~ 60°C (-4°F ~ 140°F)
- Operating Humidity :0% ~ 90% non-condensing
- Certification :CE, FCC, RoH
WWW.ALECTO.NL
SERVICE@ALECTO.NL
Hesdo, Australiëlaan 1, 5232 BB,
‘s-Hertogenbosch, The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>