COSTWAY SP37501 Kick Scooter User Manual
- June 5, 2024
- COSTWAY
Table of Contents
COSTWAY SP37501 Kick Scooter
Kick Scooter
This Scooter is easy to operate and practical and can be used anywhere.
Quickly fold for easy storage.
Fast and Eco-Friendly: It helps save your time while also being
environmentally friendly. Thank you for choosing our Scooter.
- Handles
- Rapid tightening lever for handles
- Steering column spring button
- Brake/Mudguard
- Locking lever for the folding mechanism
- Handle spring button
- Handlebar stem
- Rapid tightening lever for steering column
- Steering column
- Folding mechanism
- Rapid tightening lever for the folding mechanism
- Plastic stopper
- Handle locking mechanism
Please take note of the following assembly instructions To avoid all risk of accidents linked to the folding and Unfolding operations of your scooter for example: getting your finger stuck).
How to assemble
Scooter assembly
A-Take out the plastic plug
Use the tools in the accessory bag to remove the plastic stopper (12). so that
the handles (1). can be inserted into the Handle locking Mechanism (13).
B-Unfolding the steering column
Open the rapid tightening lever(11), then push the locking lever(5) forward to
unlock the folding mechanism(10). Then lift up the steering column(9) until it
reaches the vertical locking position (you should hear a “click” of
engagement), then firmly tighten the rapid tightening lever(11).
C-Positioning the handles
Take the two handles(1) out of their plastic cover, and insert them into the
right and left parts of the stem(7). For each of the two handles, you should
hear a click”, indicating that the handles are engaged. Check that the two
spring buttons(6) are effectively out and visible. For the scooter with
suspension, open the handle quick-release lever(2) and follow the instructions
below before tightening it firmly.
D-Adjusting the handlebar height
Open the steering column rapid tightening lever(8), adjust the height of the
handlebars until you hear a “click”, indicating engagement in one of the two
indexed positions, then firmly tighten the steering column rapid tightening
lever(8).
How to fold
Folding the scooter
E-Folding down the handlebars
Open the steering column rapid tightening lever (8), press in the Steering
column spring button (3), lower the handlebars, then Tighten the steering
column rapid tightening lever (8).
F-Packing away the handles
For each handle (1), press in the spring button (6), take the Handle (1) out
from its place in the stem (7), and put it in its Plastic cover.
G-Folding the steering column
Open the rapid tightening lever(11), then push the locking lever(5) towards
the front to unlock the folding mechanism(10). It will be easier to unlock if
you push the steering column(9) forwards, then lower the steering column(9)
until you reach the locking position, and then tighten the rapid tightening
lever(11). 
WARNING: In order to prevent the stepping plate and the steering column from falling off when the product is strongly shaken or lifted, please connect the stepping plate and the steering column with the adhesive hook and loop tape after the product is folded(As shown in the picture).
Recommendations for use
Before each use, check that your scooter is correctly assembled. There must be a “click at each moment of engagement in the vertical locking position of the steering column, the rapid tightening of the steering column, and of the folding mechanism. Please note: the brake may become hot during use. Do not touch it after see.
Advice for use
- This product is not a toy. It is a sports and entertainment product.
- To brake, use your pushing foot to press on the brake.
- As the majority of serious accidents take place during the initial month, take the time to learn the basics of the sport.
- For safety, we advise you to use this appliance with protective equipment, Such as the helmet, elbow pads, knee pads, and gloves.
- The maximum weight of the user is 100kg.
- This scooter can only be used by one person at a time.
- Respect the current Highway Code.
- Avoid places with heavy traffic or that are too busy.
- Avoid using the scooter on slippery or wet surfaces
- Avoid steep slopes, and ensure that the brake is in good working order. Always wear shoes (for example training shoes).
- Take care to always keep two hands on the handlebars.
- Do not change the purpose of this product. This scooter is not intended for acrobatic use. Do not use it to jump over obstacles.
- In all situations, take care both of yourself and others.
- You are advised not to use the scooter at night.
Maintenance
Regularly check that the various screwed parts are tight, particularly the
wheel axles, the collapsible axis, the brake shaft, and the head tube locking
collar and suspension, because of the self-tightening screws or other
attachment may lose their effectiveness. Always replace used parts with
original parts. Keep the scooter in a dry, dust-free place. Do not modify or
transform the scooter, specifically the steering column and socket, the stem,
the folding mechanism, and the brake.
Check the condition of the bearings and wheels regularly, and replace them if necessary.