COSTWAY MU70009 61-Key Electronic Keyboard Piano with Lighted Keys and Bench User Manual

MU70009 61-Key Electronic Keyboard Piano with Lighted Keys and Bench
User Manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.

Please give us a chance to make it right and do better!

Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!

Follow Costway

Contact Us!
Do NOT retum this item.
Contact our friendly customer service department for help first.

E-mail
US:cs.us@costway.com
UK:cs.uk@costway.com

Please read all instructions carefully and keep It for future reference.
Waring!
Attention: The Product Is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.

WARNING:
CHOKING HAZARD- Small parts.
Not for children under 3 years.

General Warnings:
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly Installed, Incorrect Installation can lead to danger.
We recommend that, where possible, all Items are assembled near to the area In which they will be placed In use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, and place the product always on a flat, steady, and stable surface.

NOTICE
Please read over the NOTICE before use!

NOTICE

• A dedicated power adapter shall be used, and in case of adaptor damage, replace it immediately
• The keyboard can only be disassembled by professionals, and no change can be made to the internal structure. In case of any functional abnormality during the performance, stop performing immediately and send the keyboard to professionals for maintenance.
• When connecting the keyboard to another device, ensure both the keyboard and the device to be connected are powered off before connection.
• Do not tum and keep the volume to the maximum or to an uncomfortable degree for a long time when performing
• Keep the keyboard away from the heat sources to protect its parts from damage.
• Prevent liquid, dust, small particle, and other foreign matters from entering the case of the keyboard, which may result in an element short circuit.
• Pull out the plug before cleaning the keyboard, and do not pull out the plug with a wet hand.
• Please use a dry and soft cloth to clean the keyboard. Paint, alcohol, or other chemical solvents shall not be used for cleaning, for which may damage the keyboard surface.
• Please pull out the plug after performing or when the keyboard is left unused for a long time.

Package Contents

• 61-Key Lighting Electric Keyboard Piano with LCD Display X 1 pc
• Keyboard Stand X 1 pc
• Stool X 1 pc
• Power Adaptor X 1 pc
• Headphone X 1 pc
• Microphone X 1 pc
• Music Stand X 1 pc
• Installation Manual X 1 pc

Panel Control and External Ports

Top panel control

Rear panel port

Preparations before Playing

Power adaptor
A dedicated power adapter shall be used. Connect the output end of the adaptor to the power port on the rear panel of the keyboard, and then the other end to the power  socket. (Note: the input voltage of the adaptor shall be compatible with the power supply voltage)

Audio output/ external headphone

• Audio output: Firstly, turn off the keyboard and the external audio devices, secondly, connect one end of the audio cable to the PHONES/OUTPUT port on the rear panel of the keyboard, and then connect the other end to the audio input port of the audio devices.
• Headphone connection: When connecting a headphone to the PHONES/OUTPUT port on the rear panel of the keyboard, the loudspeaker will be disabled automatically.  In this way,  you can play the keyboard without disturbing others.
  Note! When using the headphone, do not turn up and keep the volume to the maximum for a long time, which may cause hearing loss.

Mic Input and Audio Input

• Mic input: Connect a microphone to the MIC port to start singing and playing.
• The Keyboard has the stereo input function. Sound signals from mobile phones, MP3 players, computers,s, and other audio devices can be input into the keyboard system for playing. Firstly turn off the Keyboard, then, connect one end of the audio cable to the output port of an audio device, and the other end to the AUDIO INPUT port on the rear panel of the Keyboard, finally, turn on the keyboard.

Playing MP3 music
Insert a U disk into the UDISK port on the rear panel of the Keyboard for MP3 music playing.
Support 32G (max.).

• Press the [ ] bottom to adjust the volume.
• Press [ ] to go to the previous track, press [ ] to go to the next track, [ ] play/pause a track, [ ■ ]stop a playing track,[ ] to cycle through the repeat modes for continuous, random, or single playback.
• Press [Effect] to adjust the effect among Common, Pop, Rock, Jazz, and Classical. The keyboard is defaulted to be in common effect.

Basic Playing Method

Press [Power On/Off], and the keyboard will light up from both sides, and the LCD display will turn on and show the current Tone, tempo, and other status. Then you may operate the Keyboard as required.

Key lighting
The Keyboard has a luminous function, under the mode of playing, training, and playing a demo song, the light hint will be provided. The luminous function is defaulted to be enabled, press [KEY LIGHTING] to enable or disenable the luminous function.

Master volume adjustment
Press [MASTER VOL+/-] to turn up or turn down the master volume. “VOLUME” and the current volume level will be shown on the display. Press [MASTER VOL+/-] simultaneously to reset to the default value. The master volume can also control the accompaniment volume.

Accompaniment volume adjustment
Press [ACCOM VOL+/-] to turn up or turn down the master volume. “RC-VOLUME” and the current volume level will show on the display. Press [ACCOM VOL+/-] simultaneously to reset to the default value.

Timbre selection
The Keyboard provides 255 timbres, from “000” to “254”, for your selection. When turning on the keyboard, the timbre selection function will be enabled automatically, and  “TONE” and the current timbre number will show on the displays. When under other states, press [TIMBRE] to enable the Tone selection function. The Tone is defaulted to be  “000”, and it can be adjusted by pressing the corresponding number buttons or pressing the “+” /”-“button.

Playing Percussion
This Keyboard provides 61 kinds of keyboard percussions. Press [KEYBOARD PERCUSSION] to convert the key to a percussion key. Each key corresponds to one percussion instrument. Press this button again to disenable the keyboard percussion function.

Playing demonstration songs
50 demo songs have been stored in the Keyboard, from “000” to “049”, for your selection.
Press [DEMO SONG] to play all demonstration songs in order, the luminous key will flash to the melody, and “SONG” and the current demo song number will show on the display.
Press the number buttons or”+”/” buttons to select the demonstration song.
When pressing [TIMBRE] during the demonstration song playing process, “TONE” will show on the display, press the number buttons or the”+”/-“button within 3 seconds to select other Tones for playing the demonstration song.
Press [START/ STOP] or press [DEMO SONG] again to stop playing the demonstration song.

Auto Rhythm

Rhythm selection
This Keyboard provides 255 rhythms, from “000” to “254”, for your selection, and the rhythm is defaulted to be “000”. Press [RHYTHM] to enable the rhythm selection function. “RHYM” and the current rhythm number will show on the display. Then you can press the number buttons or the “+” /”- • buttons to select other rhythms.

Rhythm control

1. Rhythm enabling
   ♦Press [START/STOP] to start the accompaniment rhythm.
   ♦ Press [SYNC], “SYN” will show on the display and the four-beat points will flash simultaneously, then play any key in the chord key zone (the 1st-19th key, from left), the accompaniment rhythm will be enabled.

2. Interlude
   After the accompaniment rhythm is activated, press [FILL-IN] to have a temporary rhythm play during the accompaniment rhythm. If press and hold [FILL-IN], the temporary rhythm will continue.

3. Stop rhythm
   During the accompaniment rhythm, press [START/STOP] to stop the accompaniment rhythm.

Metronome
The metronome contains four tempos, 1/4, 2/4, 3/4, and 4/4, respectively. Press the [METRONOME] continuously to select the four tempos. Press the [METRONOME]  button again to stop the tempo.

Tempo adjustment
Press [TEMPO+/-] to increase or decrease the rhythm speed. Press the two buttons simultaneously to reset to the default value.

Auto Bass Chord

Single chord
Under the state that the rhythm is enabled, press [SINGLE CHORD], and “SIN” will show on the display, and then you can play a single chord on the keys in the chord zone of the keyboard.

Fingered chord
Under the state that the rhythm is enabled, press the [FINGERED CHORD] button. “FIN” will show on the display, and then you can play a fingered chord on the keys in the chord zone of the keyboard.

Chord OFF
Press [CHORD OFF] to disenable the single chord or the fingered chord function.

Single Chord Fingering

Fingered Chord Fingering (C Key)
(The C key fingered chord fingering is as shown in the following figure, and the rest can be obtained by analogy)

Chord Timbre
During single chord or fingered chord accompaniment, you can press [CHORD TIMBRE] to change the chord tone, and press [CHORD TIMBRE] again to resume the original chord tone.

Status memory function

With the status memory function, you can save the tone, rhythm, tempo and other parameters to be changed during playing, for fast shifting. This keyboard is equipped with 3  status memories, which can be flexibly called at any time during playing.

Storage of status memory
Set the tone, rhythm, tempo, and chord as required, and then press the [MEMORY] button and one of [MEMORY 1] to [MEMORY 3) to save the current status.

Calling of status memory
Press any one of [MEMORY 1) to [MEMORY 3) to call the setting parameters saved under this memory to replace the current status.
No power failure protection is provided for the saved contents, and the saved contents will be lost after the electronic keyboard is restarted after a power cut.

Effect Control

Transposing function
With the transposing function, you can play music of other tunes with the C-tune fingering method. Press the [TRANSPOSE-] to decrease the tone by a half-tone (minor second),  and the tune in the C-tune keyboard zone will change to B-tune. Press the [TRANSPOSE+) to increase the tone by a half-tone (minor second), and the tune in the C-tune keyboard zone will change to #C tune or bD tune. When pressing the [TRANSPOSE-] twice, C-tune will shift to bB-tune, when pressing the [TRANSPOSE+) for five times, C-tune will shift to F-tune. Press [TRANSPOSE+] and [TRANSPOSE-] simultaneously to recover to C-tune “00”. Press [TRANSPOSE+) and [TRANSPOSE -] to adjust the level from “P-6″ to”P6”.

Sustain function
Press [SUSTAIN], “SUS” will show on the display, and the sustain effect will be activated.
Press this button again to disenable the sustain effect.

Vibrato function
Press [VIBRATO], “VIB” will show on the display, and the vibrato effect will be activated.
Press this button again to disenable the vibrato effect.

Keyboard splitting function
Press [SPLIT) to enable the keyboard splitting function, “SPLIT” will show on the display. 24 keys on the left of the keyboard will split with the remaining keyboard. While the left keyboard zone will increase by one octave and maintain the original tone, the right keyboard zone will decrease by one octave to maintain the same pitch as the left keyboard zone. The tone of the right keyboard zone can be set as needed so different tones can be played by the left and right keyboard zones at the same time.
Press [SPLIT) again to disenable this function.

Recording and Rhythm Programming

The training I: One Key
Press [ONE KEY] to enable the One Key training function, “LEARN”, “SONG” and the song number will show on the display, and then press the “+”/”-” button to select the song to be learned.
The luminous keyboard will light on according to the main melody notes, indicating the note to be played, and you can perform by following the guidance of the lighted key.
Single Key training aims at duration learning, and there is no requirement for pitch or correctness. This mode allows mistakes when playing the keys, but the keyboards still play correct notes, and the luminous keys will light on according to the correct notes while the key zone in the display will also show the correct notes.
After one song is finished, repeat the current song to be learned.
Press [Start/Stop] or press [ONE KEY] to disenable the training function.

Training II: Follow
Press [FOLLOW] to enable the following function, “LEARN”, “SONG” and the song number will show on the display, and then press the “+/-” button to select the song to be learned.
With the [FOLLOW] function, you can learn by following the correct playing notes. You can play according to the demonstration song, the key will light on according to the melody notes, indicating the notes to be played, and you can play correctly by following the guidance. You can also learn how to play by following the indicators in the key zone of the display. It will wait for you to play the correct note before it moves to the next one.
Notes: Under this state, the Keyboard plays only the correct notes, and gives no response to the wrong notes.
Press [START/STOP) or press [FOLLOW) to disenable the training function.

Training Ill Ensemble
Press [ENSEMBLE] to enable the Ensemble training function, “LEARN”, “SONG” and the song number will show on the display, and then press the “+”/”-” button to select the song to be learned.
The Ensemble training aims at the correct and comprehensive learning of the song duration and notes. The keynote will be shielded for the ensemble. The luminous keyboard will light on according to the main melody notes, indicating the note to be played, and you can perform by following the guidance of the lighted key. You need to play the correct note according to the correct duration of the song. If you fail to play within 3 seconds, the keyboard will automatically play the keynote, and the keyboard zone on the screen will display the correct note and tempo.
After one song is finished, repeat the current song to be learned.
Press [START/STOP] or press [ENSEMBLE) to disenable the training function.

Timbre Table

Rhythm Table

Assembly Instruction of Keyboard Stand

ATTENTION:ADULT ASSEMBLY REQUIRED HTYPESTAND

Attach Section (B) to (D) and(C) using the appropriate screw (F). Repeat this process for the other side section.

Fastening screws (F) for adjusting to the suitable height of keyboard legs.

Find Section (D) & (E).Align the holes on the base of (D) to the holes on (E). Use nut (I) and bolt (H) to connect the two sections. Use correct tools to ensure a firm attachment. Repeat this process for the other side section.

Attach two sections (B) to section (A) using four (F) screws to create the upper section.
Fastening screws(G)for fixing the keyboard on the stand.

Welcome to visit our website and purchase our quality products!

With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich 

• Reward Points
  

• Exclusive Customer Service
  

• Personalized Recommendations
  

• Permanent Shopping Cart
  

• Order History

We would like to extend our heartfelt thanks to all of our customers for taking the time to assemble this product and giving us valuable feedback.

http://www.costway.com/hysalesrule/qr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>