solis 1030 Digital Pocket Scale User Manual
- June 5, 2024
- solis
Table of Contents
Solis 1030 Digital Pocket Scale **We congratulate you on buying this
compact precision scale.**
SAFETY NOTES
For reasons of your own well-being, please take the following safety precautions when using electrical appliances:
- The appliance is only suitable for domestic use, not for commercial use.
- This product is not calibrated for commercial or scientific purposes.
- Use the appliance only with two correctly inserted AAA 1,5V batteries.
- The appliance must not be operated near water or other liquids.
- The appliance must not get wet (splash water etc.) resp. be operated with wet hands.
- Keep the appliance away from hot surfaces.
- Always place the precision scale on a dry, clean, horizontal work surface before switching it on.
- Use the precision scale only in rooms and at room temperature.
- Do not shake or move the precision scale during use.
- Place the item you wish to weigh in the centre of the weighing platform in order to accurately obtain its weight.
- Do not overload the appliance, otherwise the scale might be damaged (max. 650g).
- in case the LCD display does not display “0.0” after switching the appliance on, please press the TARE button.
- The batteries have to replaced once “Lo” lights up in the display.
- Always dispose of the batteries in an environmentally responsible way.
- Switch the appliance off with the ON/OFF button after use and before cleaning.
- The appliance should always be covered with a transparent cover when it is not in use. Do not place any items on the appliance or on the transparent cover while the appliance is in storage. Be careful to prevent the appliance from falling down.
- Only clean the scale with a dry or slightly moist towel. Never use aggressive, scouring or corrosive detergents.
- Repairs to this appliance must only be done by authorized service centres (e.g. Solis customer service).
- No liability for damage can be assumed and any guarantee will be voided if the appliance is used for purposes other than the one specified in this user manual, if it is improperly operated or if repair work is carried out unauthorised.
- Persons with limited physical, sensory or mental capabilities, or persons with out the appropriate knowledge or experience, including children, may not use the appliance unless they are supervised by a person responsible for their safety or given instruction by such a person as to how the appliance is to be used. In addition, they must understand exactly what hazards may arise from the use of the appliance and how it can be used in a safe manner. Cleaning and maintenance of the appliance may not be carried out by children unless under supervision.
- Cleaning and maintenance of the appliance must not be done by unsupervised children. The device may not be used or cleaned by children under eight years of age under any circumstances.
- Do not let children play with the appliance.
- Check the appliance before every use to make sure that it is without damage and that no parts have come loose.
BEFORE FIRST USE
Open the battery compartment cover on the bottom of the appliance and insert two AAA 1,5V batteries. Please pay regard to the polarity of the batteries. Push the cover back over the battery compartment so that it audibly locks into place.
STARTING UP
- Place the scale on a dry, clean and even work surface. Switch the scale on with the ON/OFF button, the display first states “88888” and then “0.0g”. “zero” lights up to the left. This indicates that the scale is functioning properly, otherwise, the display would permanently state “88888”.
- Notes: If no weight is placed on the scale, it automatically switches off after 60 seconds. If the scale was overloaded (max. weight: 650g), the display would state “0_Ld”.
- Use the MODE button to set the desired unit of measurement. You can select “g”, “oz”, “ozt” and “ct”. The selected unit of measurement lights up to the right of the number.
- Place the item you want to weigh in the centre of the weighing platform. The correct weight is being displayed when “hold” lights up to the left of the number.
- If before weighing the display does not state “0.0”, press the TARE button to set the display to “0.0”. The indication “zero” lights up in the bottom left corner next to the weight.
- “0.0” is not displayed before Press TARE weighing “0.0” is displayed
- Tip: If you have placed a weight on the weighing platform already and now want to weigh a new weight, you can press the TARE button to set the display back to “0.0”. Only the weight of the second item is displayed not in use resp. after you have finished using it switch the appliance off. Place the transparent cover back on the scale to protect it.
- Note: The appliance switches off automatically 60 seconds after the last use.
Explanation of the LCD display
-
If the scale is overloaded (more than 650 g), “0_Ld” lights up in the display.
-
If the batteries are too weak, “Lo” lights up on the display. In this case, switch the appliance off with the ON/OFF button and change the batteries.
-
If the scale has registered the weight of the item, “hold” lights up in the upper left corner of the display.
CALIBRATION
- For calibration, switch the appliance on with the ON/OFF button and press and hold the MODE button for 3 seconds. “CAL” lights up in the display. Briefly release the MODE button before pressing it again to calibrate ZERO. Press and hold MODE for 3 sec. “CAL” is displayed, press MODE again
- Now, “200.0 g” lights up in the display. Place a weight of 200 g in the centre of the weighing platform. If the calibration is correct, “PASS” lights up in the display. Otherwise, “200.0 g” flashes permanently in the display. If this is the case, please repeat the calibration. Apply 200 g weight Calibration complete
- The calibration process has to be performed carefully and with the utmost delicacy, as it cannot be undone and can only be compensated by another calibration process. If the weight used for the calibration process is not exactly “200.0 g”, the scale will display incorrect weights after calibration.
TECHNICAL SPECIFICATIONS
- Max. weight 650 g
- Scale of measurement 0,1 g
- Overload above 660 g
- Units of measurement g / oz / ozt / ct
- Automatic shutdown 60 seconds
- Batteries 2 x type AAA 1,5V
DISPOSAL
EU 2012/19/EU
Information for correct disposal of the product in accordance with the Euro-pean Directive EU 2012/19/EU At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local com-munity waste collection centres or to a dealer providing this service. Disposing of electrical and electronic equipment separately avoids possible negative effects on the environment and human health deriving from an inappro-priate disposal and enables its components to be recovered and recycled to obtain significant savings in energy and resources. In order to underline the duty to dispose of this equip-ment separately, the product is marked with a crossed-out dustbin. Solis of Switzerland Ltd reserves the right to carry out technical and visual changes and modifications to improve the product at any time.
References
- Solis of Switzerland - Schweiz - Swiss quality household appliances
- Solis of Switzerland - International - Swiss quality household appliances