WERNER 1.27m Safety Chain For Megastep GRP Ladder User Guide
- June 13, 2024
- WERNER
Table of Contents
WERNER 1.27m Safety Chain For Megastep GRP Ladder
Product Information
The safety chain is designed for use with the Megastep range of GRP ladders. It is a replacement part used to enhance safety and stability while using the ladder.
Tools Required:
- Tool 1
- Tool 2
Product Usage Instructions
Note: These instructions assume you are fitting a replacement safety chain. If you need to remove a damaged safety chain, follow steps 4 and 5 in reverse.
Step 1:
Identify the left side of the ladder.
Step 2:
Attach part C to the left side of the ladder using tool A and B. Use two of
part C for this step.
Step 3:
Attach part C to the right side of the ladder using tool A and B. Use one of
part C for this step.
Step 4:
Attach part C to both the left and right sides of the ladder using tool A and
B. Use one of part C for each side.
Step 5:
Continue attaching part C to both sides of the ladder until you have used all
eight parts.
Step 6:
The safety chain is now securely fitted to your Megastep GRP ladder.
Overview
NOTE: These instructions show how to fit a replacement safety chain to the MEGASTEP range of GRP ladders. If required, the removal of a damaged safety chain can be achieved by following steps 4 and 5 in reverse.
Contents
-
A x 1
-
B x 2
-
C x 8
Tools Required
Assembly Instruction
PN127548-01 ©WernerCo Rev. A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>