TESY HL-213V Fan Heater Instructions

HL-213V Fan Heater
1800-2000W/220-240V ~50Hz
Instructions Manual

IMPORTANT SAFETY PRECAUTIONS:

WARNING!

• Please read this manual before operating the appliance and keep it at a safe place for future reference. In case the appliance is obtained by a new owner, it should be transferred together with its manual.
• CAUTION: Children under 3 years of age should be kept away from the appliance unless they are under constant supervision. Children from 3 to 8 years of age are allowed to operate the on/off button ONLY, provided that the appliance is installed and ready for operation and such children have been supervised and instructed in the safe operation of the appliance and they understand all related risks. Children from 3 to 8 years of age MUST NOT: connect the plug to power sockets, make adjustments, clean it or carry out user maintenance operations. This appliance can be used by children older than 8 years of age and by people with reduced physical, sensor, and mental capabilities, as well as by people with insufficient experience and knowledge provided they are supervised or instructed in the safe operation of the appliance and understand the related risks. Children should not be allowed to play with the appliance. Cleaning and user maintenance operations must not be carried out by children without supervision.
• CAUTION: Some of the appliance parts may get very hot during operation and thus cause burns to users. In case there are children and vulnerable people in the room, special attention should be paid.
• WARNING: In order to avoid overheating, do not cover the appliance!
• The appliance should not be positioned right under a power socket!
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
• Before connecting the fan heater, you should check if the voltage on the technical information plate corresponds to the voltage of the main electrical system of the place of use /at home or in the office/. The appliance is intended for the voltage, shown on the technical information plate.
• This appliance must be used only with its main function, which it was intended for, i.e. heating of domestic premises. Every different usage is considered incorrect and hence dangerous. The manufacturer does not assume responsibility for breakdowns, caused by incorrect and unreasonable usage. Non-adherence to the safety precautions will render the guarantee invalid.
• Do not leave your home, while the appliance is turned on: assure that the switch is in position OFF(0) (turned-off) and the thermostat switch is in position – minimum. Always disconnect the plug of the device from the socket.
• Keep inflammable objects like furniture, cushions, bedding, paper, clothes, curtains, etc. at a distance of a minimum of 100cm away from the fan heater. Do not use the device in areas of usage and storage of inflammable substances.
• Do not use the device in combustible areas /for example near inflammable gases and aerosols/ – there is a great risk of explosion and fire!
• Do not insert or allow any objects to get into the ventilation openings (inlets and outlets), because that can cause a break-down of the appliance or any other damage.
• The appliance is not suitable for animal breeding and is intended only for domestic use!
• Keep the air inlet and outlet free from any objects: you should keep a clear distance of at least 1m in front and 50cm behind the heater. Do not allow any objects to get into the air inlet or outlet because that can cause electrical shock, fire, or damage to the heating element.
• The most common reason for overheating is the accumulation of dust and dirt in the appliance. You should clean regularly ventilation openings with a vacuum cleaner. Before cleaning you must disconnect the appliance from the mains. Keep the fan heater always clean.
• You should never touch the appliance with wet or moist hands – there is a danger to your life!
• In order to disconnect the plug from the socket-outlet when necessary, the socket should be accessible all the time!
• You must never pull the electric cord or the appliance itself when disconnecting from the mains
• Warning! The air outlet gets hot when the appliance is operating (more than 80°С).
• Do not cover the appliance. If the appliance is covered there is a danger of overheating.
• Do not use the fan heater in close proximity to the bathroom, shower, or swimming pool.
• The electrical system to which the appliance is connected must be provided with an automatic safety fuse. The distance between the sockets and the appliance (in a turned-off state) must be at least 3mm.
• Grounding is forbidden! After unpacking and before use you must check if the mechanical parts and their gear are in a good state. If you have any doubts you should not use the appliance and search for advice from a qualified electrician.
• If the appliance is damaged or not functioning properly you must stop it and not try to repair it yourself. For any type of repairs, you must consult the Service Center for post-sale help. There you will have your damaged part replaced with an original spare one. Not obeying this instruction will compromise the appliance’s safety.
• If you decide to stop using an appliance of that kind it is recommended to make it unusable as you cut the electric cord, after you have disconnected it from the mains. It is also recommended all hazards, related to the appliance be checked. That is very important if there is a chance the discarded appliance to be used for play by children.
• You should never keep the appliance unnecessarily plugged in. Disconnect the appliance from the mains if you do not intend to use it for a long time.
• In order to avoid any overheating of the electric cord, it is recommended to unreel the whole electric cord.
• Warning: Do not use this appliance with a programmer, counter, or another device that can automatically turn it on because if the appliance is covered or incorrectly positioned there is a danger of fire.
• Place the electric cord in such a way that it does not hamper the movement of people and not be stepped on! You must use only approved connection blocks, which are suitable for the appliance, i.e. there is a sign of compliance!
• The electric cord must not be in touch with the hot parts of the appliance!
• You must never move the appliance by pulling it by its electric cord. You must never use the electric cord for moving other objects.
• Do not reel the electric cord around the appliance! Do not use the appliance with its electric cord reeled – this is also valid if a cable drum is used!
• Do not press the cord and do not stretch it by sharp edges. Do not place the cord over hot plates or on the open fire!

PACKAGE

• After unpacking the appliance you should check if it is not damaged during transportation and if all the components are included! In case you find out any damage or incomplete package you should connect with your authorized retailer!
• Do not discard the original packing box! It could be used to store the appliance during transportation in order for damages to be avoided!
• The disposal of the packing material should be done in the appropriate way! Children should be prevented from playing with polyethylene bags!

ASSEMBLY

• This appliance does not require any special assembly.
• The air inlets and outlets of the appliance must never be covered or hampered!
• The appliance is intended to be used over the horizontal floors! It is forbidden to be mounted on a wall or ceiling!
• You must never place the appliance below socket outlets!
• The appliance is not suitable to be used in a bathroom.

We thank you for choosing the HL-213V fan heater. This is a product, which provides heating at 1000W or 2000W in cold weather in accordance with the desired temperature conditions in the room. The appliance will provide long- life service if being correctly maintained and taken care of in accordance with the manual.

MAINTENANCE

• Turn the thermostat switch clockwise (to the right) until it gets to its final position.
• Summer service (ventilation only): turn the switch to position .
• Reduced power heating: turn the switch(to the right) to setting І (1000W).
• Full power heating: turn the switch (to the right) to setting ІІ (2000W).
• Turning-off: turn the switch (to the left) to set .

ADJUSTMENT OF THE HEATING CONTROLLER

When the room temperature gets to its desired condition you should turn the right-hand switch of the heating controller in a counter-clockwise direction to the position in which the appliance turns off but not more than that. The adjusted that way temperature will be automatically regulated and kept at a permanent level by the heating controller.

CLEANING

• You must first turn off the appliance and disconnect its plug from the socket. Do not use abrasive detergents!
• Clean the body with a wet cloth, vacuum cleaner, or brush!
• You must never submerge the appliance underwater – there is life danger!
• If the appliance should not be used for a certain period of time it must be secured from excessive dirt and dust by placing it in its original package.
• You must never place the hot appliance in its package!

WARNING

• Do not use the appliance next to the shower, bath, shower room, swimming pool, etc.
• The appliance always should be used in an upright position.
• Do not use the fan heater for laundry drying. Never cover the inlet and outlet grating (there is a risk of overheating). The appliance must be placed at a distance of a minimum of 50 cm from furniture and other objects.
• The appliance must be placed so that its control switches are not in the hand range of persons using the bath or shower.
• Do not use the appliance in rooms smaller than 4 square meters.

OVERHEATING PROTECTION

The in-built overheating protection automatically turns the appliance off in case of an error! In that situation, the plug must be disconnected from the mains and the control switch put in position “0”. After a short period of cooling the appliance is ready for operation (in about 10-15 minutes)! If that error is repeated – consult an authorized service at your location.
Instructions for environment protection
Electric appliances out of use contain valuable materials and hence must not be disposed of in domestic dumbs! We kindly ask you for cooperation and an active role in the preservation of natural resources by disposing of the appliance at the organized buy-back locations (if there are any).

TABLE 2: INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS
Model identifier(s): 1.HL-213V 2000W/220-240V~ 50Hz

Maximum continuous heat
output (indicative)| Pmax,C| 2.000| kW| Electric heat charge control, with room and/or outdoor temperature feedback heat
charge control, with integrated thermostat| [yes/no]
Auxiliary electricity consumption| | | | Fan-assisted heat output| [yes/no]
At nominal heat output| elmax| 1.970| kW| Type of heat output/room temperature control (select one)| –
At minimum heat output| elmin| 0.981| kW| Single-stage heat output and no room temperature control| [no]
In standby mode| el SB| 0.000| kW| Two or more manual stages, no room temperature control| [no]
| With mechanic thermostat room temperature control| [yes]
With electronic room temperature control| [no]
With electronic room temperature control plus day timer| [no]
With electronic room temperature control plus week timer| [no]
Other control options (multiple selections possible)|
Room temperature control, with presence detection| [no]
Room temperature control, with open window detection| [no]
With distance control option| [no]
With adaptive start control| [no]
With working time limitation| [no]
With black bulb sensor| [no]

TESY Ltd – Head office
1166 Sofia, Sofia Park,
Building 16V, Office 2.1. 2nd Floor
PHONE: +359 2 902 6666,
FAX: +359 2 902 6660,
office@tesy.com

References

• TESY Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>