COSTWAY SP37466 3.75HP Electric Folding Treadmill User Manual
- June 5, 2024
- COSTWAY
Table of Contents
- Products Quality Guarantee
- Safety Instructions
- Special Safety Instructions
- Assembly Instructions
- Configuration List
- Exploded-View
- Exploded-View Chart List
- Components Assembly
- Assembly Instructions
- Products Structure
- Instructions for Use
- Operation System Instructions
- Failures and Processing Methods
- Belt Adjustment and Maintenance
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
http://www.costway.com/hysalesrule/qr
SuperFit
USER’S MANUAL
Treadmill
SP37466
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.
Products Quality Guarantee
We ensure that this product is made of high-quality material. In normal use, if there is a problem, we will be responsible for the warranty. The warranty time is one year (from the date of purchase). If there is any quality problem with the products you purchase, please contact our customer service within 12 months. Please do not deal with it without permission. We guarantee the following parts: Frame, wire, armrest, foam, motor, moving wheel, etc.
The following conditions are not covered by the warranty.
- Damage is caused by the external reason
- Use non-factory original parts
- Handle it in the incorrect way users.
- Don’t follow the instructions
- Easy-broken parts, normal wear without warranty and replacement, such as running belt.
This warranty is only valid for private use in the family. It is not suitable
for professional training such as gyms.
If you need to purchase non-warranty parts, please contact customer service.
Please provide the following information when purchasing:
- The instructions
- Treadmill model
- Parts No.
- Certification of purchase date
Please do not send the products to our company without the confirmation of our
customer service.
Our company does not afford any expenses for sending the products back without
permission.
Safety Instructions
Many safety questions had been considered in the design and manufacture of this product, but please follow the instructions below just in case. We do not accept any consequences arising from abnormal operations.
To ensure your safety and avoid accidents, please read the instructions carefully before using them.
- Please consider your physical condition and properly and regularly train to ensure that you have enough physical strength for training when starting training with this product. Mistakes or excessive training will not benefit our health.
- This product is not suitable for children. Do not use if you feel unwell physically or mentally unless they are under the supervision or direction of a person responsible for their safety regarding the use of the product. Children should be monitored to make sure they do not play with the equipment.
- This product is suitable for family use, is not suitable for professional training and testing, and cannot be used for medical purposes.
- The heart rate display site of this product provides clinical data.
- If the power cord is damaged, it must be replaced by the manufacturer or professional maintenance personnel to avoid danger.
- Please check all parts before use to ensure that screws and nuts are locked.
- Please wear comfortable tight clothes to avoid the clothes being hung by the machine. Don’t let children or pets play around in case of accidents.
- Please put the product on smooth, clean, and flat ground. Make sure there are no sharp objects nearby. Keep away from water and heat sources.
- Keep your hands away from all moving parts. Do not put your hands and feet in the gap under the running belt.
- This product is only for one person at a run time.
- Make sure screws and bolts are tightened after assembly.
- Please use the accessories provided by the original factory, a Rigorous private replacement.
- This product is HC grade, with a maximum weight of 265 lbs
- There should be at least a 39.3X78.7 inch safe area behind the treadmill when in use.
Special Safety Instructions
The Power
-
Choose a place in reach of a socket when placing the treadmill.
-
Plug the power cord directly into the socket. No looseness is allowed.
-
Please use a qualified socket to avoid the danger. If the plug and socket are not compatible.
-
Please do not move the socket. Please let the electrician take care of it.
-
The voltage 110VAC power will be supplied.
-
Do not let the power cord come into connecting with the roller. Do not put the power on the running belt. Do not use damaged plugs.
-
Please remove the plug from the socket before cleaning and maintenance.
Warning: Failure to unplug may result in personal injury and device damage. -
Please inspect each part before using.
-
Please do not use the product outdoors in high temperatures and sunshine.
-
Please turn off the machine and unplug it when you leave
Assembly Instructions
- Please read the assembly instructions carefully before assembly.
- Take out all the packing materials and put them on the clean floor, so that you can check them and make your installation more convenient.
- Carefully check that all parts are complete according to the packing list.
- Please pay attention to safety when you are using tools or carrying them. Please do not install according to your personal preference.
- Please make sure tools and packing materials are kept away from children. Plastic and foam are dangerous to children.
- Assemble the product according to the instructions. Please read the assembly steps and instructions carefully.
- This product must be carefully installed by the adults, if necessary, please ask a professional to install it.
Warning: Carefully install the product. Do not damage the product Children are not allowed to use this product
Configuration List
Parts Tray
Exploded-View
Here are the assemblies which are shown in the detail sheet as follows the table
Serial No
| Parts Name And Specification| Qty| | Serial No| Parts Name And Specification|
Qty
---|---|---|---|---|---|---
1| Acrylic panel| 1| 11| Hand Grip Heart Rate Piece| 4
2| Display Upper Cover Fixing Frame.| 1| 12| Hand Grip Heart Rate Piece Upper
Plastic Cover| 2
3| Display Lower Cover Fixing Frame| 1| 13| Hand Grip Heart Rate Piece Lower
plastic Cover| 2
4| Upper Plastic Cover For Electronic Display| 1| 14| Safety Key Assembly| 1
5| Electronic Display Welding Frame| 1| 15| PU Handlebar| 2
6| Down Plastic Cover For Electronic Display| 1| 16| Rear Roller| 1
7| 80 3W Speaker| 4| 17| Running Board| 1
8| Speaker Plastic Cover| 4| 18| Running Belt| 1
9| Wooden Pattern Fixed Plastic| 1| 19| Front Roller| 1
10| Rotation Button| 2| 20| Edging Fixed Clips| 8
Exploded-View Chart List
Serial No
| Parts Name And Specification| OW| | Serial No| Parts Name And Specification|
Qty
---|---|---|---|---|---|---
21| Ftightleft Edging| 2| 41| Incline Molar| 1
22| Motor Cover| 1| 42| Elevating Frame| 1
23| Down Controller| 1| 43| Bottom Base| 1
24| Overload Protector| 1| 44| Right Upright Cover| 1
25| Powersotm| 1| 45| Foldable Gas Pressure Bar| 1
26| Hesagoa Soda Pearl Roux] Head Screw M8’40 Mal Tooth)| 2| 46| Hexagon
Socket Plain Round Head Screw M8’16| 2
27| Front Horizontal Pipe Decorative Cover| 2| 47| Flat Washer kW| 8
28| Running Deck Main Welding Frame| 1| 48| Hexagon Socket Plain Round Head
Screw M8’45| 6
29| Bottom Sealing Plate| 1| 49| Left Upright| 1
30| motor| 1| 50| Right Upright| 1
31| %/gibbed belt| 1| | |
32| ShocfcAbsonstion Pad| 4| | |
33| Right Edging Decorative Cover| 1| | |
34| Rear Moving wheel| 2| | |
35| Rear Tail Cover| 1| | |
36| Left Edging Decorative Cover| 1| | |
37| Self4apping and self-drilling screw ST4.2•18| 6| | |
38| Left Updght Omer| 1| | |
39| Rubber Floor Mat M10’20| 6| | |
40| movinowned| 2| | |
| | | | |
This parts list of the above configuration is the highest quality parts for this series of products.
Components Assembly
Assembly Instructions
Assembly with QRS wrench during assembly Stepl: Full Treadmill Installment Hold the handlebar of the display stand and slowly pull it up to the fixing bolt hole.
NOTE: do not clip the data line of the electronic display on the right
side when pulling up the instrument stand.
Display bracket will be fixed and locked with the washer of M816 screw. Hold
the handlebar of the meter bracket to erect its parts which will be locked
with screws 0(M816) and U washer (M8*45)
Step 2: Bottom Base Decorative Cover Installation
Fix the left and right side covers on both sides of the base with a screw.
Then tighten.
NOTE: please firstly lock hole a with screws (ST4.216), and then lock holes b and c with screws (ST4.2*16). Left and right are the same
Products Structure
Treadmill Movement Instructions
- When you fold the treadmill. Hold the side of the base with your feet and pull the armrests back with your hands to tilt the machine backward.
- The whole treadmill moves.
After the folding, please move to a place where children are not easy to play, and avoid the child touching the gas spring casing, so that the running platform falls and bruises then cause unnecessary accidents.
Instructions for Use
You must use a power socket with a ground wire for safety when you use a treadmill.
- Insert the power plug into the socket, and turn on the power switch a (light turns red) “Din sound will be appear on the dashboard window display. Put the safety key in the yellow area of the dashboard, and the treadmill will work normally. Please fasten the safety key clip on the clothes when using.
- To avoid accidents on the treadmill, the safety key can be pulled at any time and the motor stop operating immediately to prevent falling.
Please put safety key back and start the program again when you want to use it again.
• Folding Treadmill
Folding the treadmill can save more space. Before folding, please turn off the
power switch and unplug the power cord. Lift the treadmill by hand until the
treadmill is caught by the gas spring sleeve.
• Put down the treadmill
As shown in the figure, with the foot lightly stepping on the gas spring
casing, the running board will slowly fall to the ground. Be careful. Do not
let your child be around when you follow this step to avoid being crushed.
Operation System Instructions
-
Electronic Meter Function Instruction
• PO is manual program for users. P1-P12 is the built-in automatic training program.
• Speed range: 0.6-10.5mph ;Incline:0-15%
• System self-check, abnormal information prompt function.
• MP3 Function (Optional).
• Fan Function (Optional).
• HRC function (Optional). -
Digital Tube Window Display Instructions
• -SPEED” ” PULSE” window: Displays speed/heart rate values.
• “TIME” “CALORIES” window: Displays time/calories values.
• “DISTANCE” ” INCLINE” window: Display distance/incline value. -
Keys operating instructions
• “PROG”: Program selection key. Under stopping state, Loop selection program PO-P12.
• “MODE” It is a normal MODE when it is selected to the initial state of manual MODE, Press MODE to select the countdown MODE in manual MODE —Countdown distance MODE — >Countdown calories MODE — >Positive timing MODE. Reset key for countdown time default value (30minutes) in P1-P12.
• “START”: START/STOP keys, START the treadmill in stopping state, STOP the treadmill in running state.
• “STOP”: STOP key, Press the STOP key to slowly stop in the running state.
• Speed Increment/Decrement Key, In the state of stopping or measuring fat is the key of setting parameters; in the state of running is the key of speed increment/decrement;
• “QUICK SPEED” : 7, 4 mph quick speed key, in the running state of the treadmill, directly set the speed as the key to specify the value.
• A Incline increment key
• v Incline decrement key
• “QUICK INCLINE”: 5, 10 Incline keys, directly set incline as specified value while running. -
Safety key function instructions The safety key is composed of light touch switch, clothes clip and nylon rope.
In any state, as long as the safety key is out of position, the treadmill stops running, the electronic meter keyboard is forbidden to operate.
And the screen displays “e-07” with a prompt sound. After placing the security lock every time, the screen will display “0” for seconds, and then enter the system default working state. -
User’s Guide
• Insert the power cord plug into the 15A power socket with safety grounding, turn on the power switch, the electronic meter screen is fully displayed with the prompt sound, and then identify the safety key.
• Put the safety key in the position of electronic meter, Clip the clothes clip to the clothes on the chest, and the screen will be fully displayed for 2 seconds before entering the default working state; all counters are reset, set value is reset, and the treadmill is in the positive timing mode of manual program P0. -
Press ” PROG” to cycle select a program: PO-P12. 1.”PO” is a user-defined program.
Press “MODE” to cycle select four training modes. The training speed and slope are set by the user. Training mode
1: Time counting, Time, Distance, Calorie counting, turn off the setting function Training mode
2: Countdown, Time window flashes under the setting state. Press “+”and”-” to modify the setting value. Training mode
3:Calorie count, The calorie window flashes under the setting state and press “+” and “-” to modify the setting value.
The setting range is 20-990 CAL, and the default value is 50 CAL. Training mode
4: Count down distance, Distance window flashes in the setting state, Press the “+” and “-” keys to modify the set value.
The setting range is 1.00-99.0mile, and the default value is 1 mile.
2.P1-P12 is the system setting program, which only trains in the countdown MODE.
Time window flashes under the setting state, Press “+” and “-” to modify the setting value.
Press “MODE” key reset to the default value, the setting range is 5-100MIN, the default value is 30:00;
Failures and Processing Methods
Problem and Codes| Possible Reasons|
Methods
---|---|---
System don’t work| A. Not connected or turned on power| Connect the power, or
turn the power switch to °ON” position
B. The safety key is not in place| Put the safety key in the correct position
C. The transformer is not plugged in properly or the transformer is not good|
Check and connect transformers or replace transformers
D. Circuit breakers| Check system input and output terminal and communication
line
Suddenly stop in
normal condition| A. Safety key drop| Put the safety key in correct position
B. System abnormal| Ask the repairman to deal with it
Keys Failure| Key invalid| 1. Replace the keypad and keyboard line
2. Replace the motherboard
3. Replace the electronic meter
E-01| A. Poor communication line connection on| Reconnect the line and check
that the port is plugged in or the line is replaced
B. Electronic meter defective| Replace electronic meter
C. Transformer defective| Check and replace transformer
D. Motor control defective| Replace controller
E-02| A.Motor wire and motor defective| Replace motor
B. Poor connection between motor wire and controller or defective
controller| Check and reconnect or replace controller
E-03| A. Optical sensors is not installed correctly| Check and reconnect
B. Defective optical sensors| Replace Optical sensors
C. Poor connection between optical sensor and controller| Check and reconnect
D. Defective controller| Replace controller
E05| A. Overcurrent protection| Replace controller
B.Damage to motor| Replace the motor
E-07| The electronic meter did not detect the safety key signal| key position
1. Check the safety
2 Reset the safety key assembly
3. Replace electronic meter
No Heart Rate Record| A. Hand holding wire in wrong place
B. Poor Hand Grip Line| Check the holding wire Replace a hand grip line
C. Circuit failure of electronic system| Replace electronic meter
Incomplete
Information in
Electronic Meter| A. The screw of display board is loose| Tighten the screws
B. System failure| Replace electronic meter
The product is designed to be reliable and easy to use. If you have problems,
please read the following questions carefully.
Problem: Meter does not display Solution: Check if the power cord is
plugged in, the plug is loose, and the power switch is turned on.
Problem: Sudden power outage during use Solution: Check if the power cord
is securely connected and the overcurrent protector is disconnected.
Problem: When the treadmill moves up and down, it suddenly closes.
Solution: Check that the power cord connected to the outlet is long enough.
Problem: Running belt is not in the middle Solution: Check if the
treadmill is placed on a flat surface and the running belt is adjusted. Refer
to the adjustment process of the running belt.
If the problem is not within the above, and you are not sure how to solve it,
please contact us in time, please do not handle it privately.
Belt Adjustment and Maintenance
1. Belt Adjustment:
Belt adjustment and tension performs two functions:
The distance between belt and motor cover from left to right with+-5MM,then
needed to be adjusted.
Adjust belt by speed not more than 4KM/H
A, Running belt is shifting to the right:
Using hex key provided, turn the right bolt clockwise or left bolt
counterclockwise.
B, Running belt is shifting to the left Using hex key provided, turn the left
bolt clockwise or right bolt counterclockwise.
Running belt is slipping during use:
Slight running belt slipping is normal while using for a period, using the hex
key provided, turn both left and right rear roller adjustment bolts in the
same distance.
See the correct running belt shown as below:
A, The distance between running belt and board is :
Within 15-20mm—-Normal Over 20mm—-needed to be adjusted Under 15mm needed to
be adjusted
B. The speed for running belt is 5Km/h, Hold on the handrail, stand on the
side rail, one foot on the belt but without slipping—It is normal.
Cleaning:
Routine Cleaning of your unit will extend the life of your unit.
Warning!
To prevent electric shock, be sure the power to the treadmill is OFF and the
unit is unplugged from the wall electrical outlet before attempting any
cleaning or maintenance.
After each workout: wipe off the console and other treadmill surfaces with a
clean, water-dampened soft cloth to remove excess sweat. After each workout.
Lubrication:
It is recommended that the walking board be checked periodically (around 3
months) for lubrication Using hex lift the belt and insert the silicone oil
about 20 grams to spray smoothly (adjust belt before lubrication)
Important Terms
Warning
Please talk to your doctor before you start an exercise program. Please be
sure to consult your doctor or a professional before you start if you are over
the age of 35 or not feeling well, and this is your first-time fitness
exercise. Please follow the instructions to install and use this product.
Cautions
-
Please choose a bright and well-ventilated place to install the treadmill.
-
Please keep your children and pets away from the treadmill. Do not leave your child alone in the room where the treadmill is kept.
-
Please do not put the treadmill in a damp place. It will cause trouble.
-
Please do not wear clothes that are too long or too baggy for your fitness exercises. In case they are hung on the treadmill.
Usually, wear running shoes or exercise shoes with rubber soles. -
The treadmill is special equipment. Do not modify or as the other user.
-
Please don’t put the treadmill and miscellaneous things together.
-
To be safe, please check the screws and other accessories on the treadmill for locking before using.
-
Please do warm-up before exercise to prevent inquiry.
-
If you feel dizziness, nausea, chest tightness or other abnormal symptoms in the process of exercise, please stop exercising immediately and consult a professional doctor if necessary.
-
Please use the treadmill under the guidance of a professional health physician for a disabled person
This manual is just for reference.
If there is anything wrong, please contact us.
Gymax App Instruction Manual vi 0 2
This document is applicable to the Android version and iOS version of the
official APP of Gymax.
iOS: Search Gymax in App Store to download
Android: search and download from Google Play store
Functions Overview
Gymax App i0S/Android with Gymax platform provides users the control of sports
intelligent device, sports data recording, sports mall, dynamic sharing in
community, system Settings and other functions.
The Main functions
Sign In
Sports Scenes
Sports Mall
Community Dynamic
Settings
Sign in Process
Sign in For the convenience of users, Gymax provides three login methods:
Facebook and E-mail, and iOS users can also Sign in with Apple.Users can quickly sign in to the Gymax App and use it.
Retrieve Password
If E-mail users forget Passwords, users can click ‘Forget Password” on the
mailbox login interface to jump to the Password retrieval interface, and then
reset Passwords.
Edit Information
In the personal information interface, clicking the avatar, users can edit the
avatar and upload the avatar by choosing album or camera.
Sports Scenes
Connecting services On the home page, users can freely choose the device type
to connect. After connecting successfully. users then start the device page.
such as the ‘Treadmills interface.
Starting exercise
Selecting the device page, such as “Start” on the “Treadmill” interface, users
enter the running free, as shown below:
-
Waiting for GyMax to automatically connect to the treadmill.
-
When the connection status sign _ is lit, it means that the APP has successfully connected to the treadmill.
Users click 0 , then the treadmill starts Running and enters the countdown. 3.2.1 GO.
-
The Gymax App synchronizes exercise data, such as mileage, duration, calories, and speed, as users run on the treadmill, and users can start or stop, accelerate or decelerate the treadmill, which intuitively shows users’ current sports ranking and the number of online sports in real-time.
-
When users finish the exercise, the Gymax App will show users’ total mileage.
-
Users can share the sports data with the community or save it to their phone album.
Sports Plan
Users can click “Add More Training Plans’ to Add users own sports plans.
Setting Goals
-
Users can set suitable sports goals.
-
When the goal is reached, the exercise automatically ends.
Training Course
-
Users can select courses in the interface of the training course.
-
And then Start training with a fitness coach.
Exercise Record
The user can view the Exercise data record in the device page. (me•exercise
data)
Sports Mall
Users can purchase satisfied sports devices.
Community dynamic
- In the sports community, users can share dynamic communication with each other.
Settings
System Settings
Users can click “Me” to enter the setup, including unit, feedback, terms of the agreement, privacy agreement and clear cache, etc.
Unit settings (metric or imperial standard)
Users can clean up the system cache according to users’ needs, including Gymax App H5 web page load cache and image load cache.
Feedback
Users can submit suggestions and the problem for improving the product
Welcome to visit our website and purchase our quality products!
With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS, and EFFICIENT SERVICE! US office: Fontana, California UK office: Ipswich
- Reward Points
- Exclusive Customer Service
- Personalized Recommendations
- Permanent Shopping Cart
- Order History
5 Star Rating
We would like to extend our heartfelt thanks to all of our customers for taking the time to assemble this product and giving us valuable feedback.
Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
Follow Costway
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
****Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Seperate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled. Always place the product on a flat, steady, and stable
surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.