globe 50027 Wi-Fi Smart Water Leak Sensor Instruction Manual
- June 5, 2024
- globe
Table of Contents
SMART WI-Fl WATER SENSOR
SKU 50027
Instruction Manual
OPERATING INSTRUCTIONS
Check out the installation video on our website: globe- electric.com/smart
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. READ ALL INSTRUCTIONS BEFORE
USE.
WARNING – To reduce the risk of fire, electric shock, or serious personal
injury:
- Do not immerse or expose the main body in/to water or other liquids.
- This product is not intended for use by children and contains small parts that may pose a choking hazard to children under the age of three. Keep the product out of the reach of children and pets.
SPECIFICATIONS
- Required battery: lx CR2-3V
- Standby current:13 pA
- Working current:115 mA-120 mA
- Wireless type: 2.4 GHz
- Wireless range: 45 m
- Wireless Protocol:IEEE 802.11b/g/n
WHAT’S IN THE BOX
PRODUCT INFORMATION
HOW TO POWER THE SENSOR
- Remove the holder from the main body. Twist the top half of the sensor counterclockwise. Once the casing is off, remove the small plastic tab on the battery terminal. The battery will be connected and the sensor will automatically be in pairing mode.
- If not in pairing mode press and hold the power/reset button for 5 seconds until flashing rapidly.
MOUNTING INSTRUCTIONS
- When you select your mounting location, make sure the surface area is clean.
- During the mounting process, ensure the metal contacts on the probe are facing downwards.
There are 2 options for mounting:
Option 1:
You can simply place the water sensor on a flat surface without mounting the
holder.
Option 2:
Remove the holder from the main body. Select your location and mount the
holder using the included screw and wall anchor. Once installed, insert the
main body and plug in the probe.
BATTERY HANDLING AND USAGE
WARNING: Keep batteries away from children and pets.
-
Follow the battery manufacturer’s safety and usage instructions.
-
Insert the battery observing the proper polarity (+/-) as indicated inside the battery compartment.
CAUTION: Failure to properly align the battery polarity can cause personal injury and/or property damage. -
Remove a spent or discharged battery from the product. Remove the battery when not using the product for an extended period.
-
Never throw batteries into a fire. Do not expose batteries to fire or other heat sources.
DISPOSAL OF USED BATTERIES:
The battery may contain hazardous substances which could endanger the
environment and human health. Used batteries shall not be treated as municipal
waste, but left at the appropriate collection point for recycling. For more
information about the collection and recycling of used batteries, please
contact your local municipality or waste disposal service.
- Use type CR2-3V battery.
- Install only new batteries of the same type in your product.
- Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak.
- The danger of explosion if the battery is incorrectly replaced.
- Batteries should be recycled or disposed of as per state and local guidelines.
BATTERY REPLACEMENT
- Remove the holder from the main body.
- Twist the top half of the sensor in the counterclockwise rotation.
- Remove the spent battery and place the lx CR2-3V battery into the battery compartment, correctly observing the polarity indications (+/-)
- Replace the top half of the sensor by rotating it clockwise.
LIMITED WARRANTY
This device is warranted for
1 year from the date of purchase. If it fails before that time, we will replace it. Send Globe Electric the sensor, proof of purchase, and register receipt along with your complete name and address. See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT CAUTION:
This device is intended for indoor use or in weather-protected fixtures.
Lithium Battery: 3.0V A size. Do not recharge, crush, disassemble, heat above
85°°C, incinerate, or expose the main body to water. Fire explosion and severe
burn hazards may ensue. This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with a
minimum distance of 20 cm between the radiator & your body.
User Manual Notice for Licence-Exempt Radio Apparatus
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-3 (B).
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator & your body.
Since 1932, Globe has taken pride in offering products of the highest quality,
and a level of service unparalleled in the industry. Should you encounter any
difficulties, have any questions or simply wish to offer us your valuable
feedback, you may contact us in the following ways:
Toll-Free Telephone:1-888-543-1388
(North America Only) /Toll-Free
Fax:1-800-668-4562 (North America Only)
E-Mail: info@globe-electric.com / Mail:
Globe Electric Customer Service Department 150 Oneida, Montreal, Quebec,
Canada H9R 1A8 Please visit our website to discover other quality Globe
products:
http://www.globe-electric.com
FCC RESPONSIBLE PARTY
Globe Electric 1-888-353-1388 15301
Shoemaker Ave Norwalk, CA 90650
www.globe-electric.com
50027 07-019-20
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>