Bonsenkitchen CG8001 Coffee Grinder Electric Instruction Manual

CG8001 Coffee Grinder Electric
Instruction Manual

Read this manual thoroughly before using it and save it for future reference www.bonsenkitchen.com

IMPORTANT SAFEGUARDS

Before using the electrical appliance, the following basic precautions should always be followed including the following:

• Read all instructions.

• Before use check that the voltage of the wall outlet corresponds to the one shown on the rating plate.

• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.

• If the supply cord is damaged it must be replaced by the manufacturer or an authorized service agent or a qualified technician in order to avoid a hazard.

• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

• Care shall be taken when handling the sharp cutting blades, emptying the bowl, and cleaning.

• Do not let the cord hang over the edge of a table or hot surface.

• Do not immerse the motorized base in liquid, or place it in the dishwasher. Damage to the unit will occur if submerged in liquid or filling the liquid into the container. Only the top cover may be immersed.

• Close supervision is necessary when your appliance is being used near children or infirm persons.

• Ensure fingers are kept well away from moving parts.

• Do not remove the cover until the blade has completely stopped.

• Do not attempt operation without the cover being in place.

• Do not run the appliance without load.

• The use of accessories not recommended by the manufacturer may cause injuries to persons.

• Immediately turn off the appliance and send it to the authorized service agent for repair if abnormal sound, abnormal taste, excessive heat, and smoke are found during use.

• Remove the dust and other foreign objects from the appliance before use.

• It is forbidden to disassemble, repair, and rebuild the body.

• After each use, turn the ground control to the “1” position and ensure that the motor stops completely before disassembling.

• Do not plug and unplug the appliance with wet hands or wet towels.

• Do not drag or bind the power cord.

• Do not shake or drop the appliance strongly.

• Check the grinding chamber for the presence of foreign objects before using.
  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• Misuse may cause potential injury.

• Do not operate the appliance for other than its intended use.

• Do not use outdoors.

KNOW YOUR coffee grinder

BEFORE THE FIRST TIME

1. Carefully unpack your coffee grinder and remove all packing materials.
2. To remove any dust that may have accumulated during packaging.
3. Rinse the bean box, bean box lid, ground coffee container lid, and ground coffee container with water, and then dry thoroughly.

Caution: Never immerse the body in water for cleaning and do not fill the grinding unit with water for cleaning.

OPERATION

I. Grind coffee beans automatically

1. Place the coffee grinder on a flat surface.
2. Check and make sure that the coffee channel outlet cover must be closed well (see Fig.1), otherwise, the grinding unit can be not installed well and the appliance can not work.
3. Install the grinding unit onto the upper body as follows: Firstly, align the “symbol on the grinding unit with the “symbol on the upper body (see Fig.2), then rotate the grinding unit clockwise until the “symbol aligns with the “symbol (see Fig.3). If you want to remove the grinding unit, firstly run the coffee grinder to finish grinding the beans in the bean box, then press down the release button and simultaneously turn the grinding unit anticlockwise to remove the grinding unit from the upper body. NOTE: The grinding unit is equipped with a microswitch so that it must be assembled in position before the operation, or the appliance will not work.
4. Install the bean box onto the bean box holder as follows: Firstly, align the “ ” symbol on the bean box with the “ ” symbol on the upper body (see Fig.4), then rotate the bean box clockwise until the “ ” symbol on the bean box aligns with the ” **** ” symbol on the bean box holder (see Fig. 5). If you want to remove the bean box, firstly run the coffee grinder to finish grinding the beans in the bean box, then rotate the bean box counterclockwise for 90°to remove the bean box from the bean box holder.
5. Pour the appropriate amount of coffee beans into the bean box, it must be noted the number of coffee beans shall not exceed 240g.
6. Close the bean box lid.
7. Put the ground coffee container (with lid in position) on the ground coffee container holder. Ensure that the opening of the ground coffee container shall align with the ground coffee outlet.
8. Turn the grind control dial to select your desired grind size. Turn it to the left, and the ground coffee will be finer and finer, while the ground coffee will be coarser and coarser when turning the grind control dial to the right.
9. The ground coffee amount is determined by the grinding time, and you can select your desired grinding time by following Table 1. If you do not want to adjust the grinding time, the appliance will work under the default grinding time.
   Table 1

10. Connect the appliance with the power source, the indicator of the Start/Stop button blinks three times, and then it illuminates solidly.

11. Press the Start/Stop button, its corresponding indicator blinks, then the appliance starts to run.
    NOTE:
    (1). The appliance will enter into the sleep state if there is no operation within 90 seconds after the plugin.
    (2). You can press the Start/Stop button to make the appliance stop running at any time during the grinding process.
    (3). The appliance must rest for 30 minutes if it is operated for 3 minutes continuously. And it is suggested to operate this appliance for less than 90s per time and a rest time of at least 90 seconds must be maintained between continuous two cycles.
    (4.) The appliance can not work for 6 minutes continuously within 10 minutes, and it must rest for 30 minutes if the working time exceeds 6 minutes.

12. When desired grinding time is reached, the coffee grinder will stop working automatically and the indicators of the “Start/Stop button” and the selected ground coffee amount will illuminate solidly. And all the indicators will turn off and the appliance will enter into sleep mode if there is no operation within 90 seconds. To reactivate the appliance, press any button.
    NOTE: The maximum amount of ground coffee container is 130g, make sure the ground coffee shall not overflow.
    NOTE: After finishing grinding, pour the ground coffee into another container to avoid overflow if you need to continue grinding.

13. Unplug the appliance, remove the ground coffee container lid and pour out the ground coffee directly.

I. Grind coffee beans automatically

1. Follow the operations of Steps 1-6 of “Grind coffee beans automatically”.
2. Turn the grind control dial to select your desired grind size.
3. Connect the appliance with the power source.
4. Install the funnel bracket onto the appliance well and then put the pressurized portafilter onto the funnel bracket and then push the pressurized portafilter forward to fix it well in position (See Fig.6).
5. Press the Start/Stop button, then the appliance starts to run.
6. When the desired amount of ground coffee is got, remove the pressurized portafilter from the funnel bracket, then the appliance will stop working and the indicator of the Start/Stop button will illuminate solidly. All the indicators will turn off and the appliance will enter into the sleep mode if there is no operation within 90 seconds. To reactivate the appliance, press any button.

CLEANING AND MAINTENANCE

CAUTION: Be sure to unplug this appliance and make it cool down completely before cleaning. To protect against electrical shock, do not immerse the cord, plug, or body in water or liquid, and do not fill the grinding unit with water for cleaning. After each use, always make sure the plug is first removed from the wall outlet.

1. Disassemble the bean box by following the operation mentioned above, and then rinse the bean box, bean box lid, ground coffee container, and ground coffee container lid with water, and dry them thoroughly.

2. Disassemble the grinding unit by following the operation mentioned above, then detach the ground coffee outlet cover and clean the residual coffee powder on the grinding wheel and grinding blade with a brush, and then pour the residual ground coffee out. Finally, replace the grinding unit well in place. The grinding unit can not be put into the dishwasher for cleaning.
   NOTE: Please operate carefully as the grinding wheel & grinding blade are a sham. Before removing the grinding unit, make sure that all the coffee beans in the bean box are ground completely, do not rinse the grinding unit with water.

3. Wipe the body with a wet cloth and then dry it completely. 4. When do not use the appliance, store it in a dry and cool environment.

GRINDING TIPS

1. The coarse ground coffee is generally used for percolators and coffee urns. Medium ground coffee is used for drip coffee makers and steam-type espresso machines. Fine ground coffee is used for espresso machines with an electric pump.
2. For the freshest, most flavorful coffee, grind only enough for the pot you are making. Coffee beans keep up to 2 months in the freezer in an airtight container and can be ground while still frozen. ground coffees left in your grinder can become stale and affect the flavor of freshly ground coffee. Be sure to clean the grinding chamber, blades, and grinding wheel after each use.
3. This grinder can only grind dry, brittle foods. It will not grind anything moist, extremely hard, or gummy such as whole ginger, chocolate, sesame seeds or oily spices such as cinnamon, cloves, or nutmeg. Do not grind peanuts or grains such as wheat, rice, barley, or dried corn. Attempting to grind any of these foods may damage the unit. Never use it to chop ice cubes.
4. Freshly ground peppercorns have a strong aroma and taste that may affect the flavor of coffee beans ground afterward. You may want to purchase a separate grinder if you plan to grind peppercorns.

ENVIRONMENT-FRIENDLY DISPOSAL

You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal center.

Register your product at www.bonsenkitchen.com to get more perks!

Follow us @bonsenkitchen
BRONSON ELECTRONICS INC.
: 5805C Peachtree Corners East
Norcross, GA, 30092
: 1-888-965-8032
: support@bonsenkitchen.com
www.bonsenkitchen.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>