VEVOR ZWE-DDJ-SS-11 Height Adjustable Desk User Manual
- June 13, 2024
- VEVOR
Table of Contents
- VEVOR ZWE-DDJ-SS-11 Height Adjustable Desk
- Product Information
- Product Usage Instructions
- ASSEMBLY PRECAUTIONS
- USE PRECAUTIONS
- TECHNICAL SPECIFICATIONS
- PACKAGE CONTENTS
- ASSEMBLY STEPS
- Height Adjustment Controller Operation
- Detailed introduction of key functions
- Error Code Instructions
- COMPLETION
- Documents / Resources
VEVOR ZWE-DDJ-SS-11 Height Adjustable Desk
Product Information
- Model No.: ZWE-DDJ-SS-11, ZWE-DDJ-SS-12
- Main Material: Steel + Board
- Color: Brown + Black
- Product Dimensions (LxWxH): 1200 x 600 x 1270 mm
- Packing Size (LxWxH): 1285 x 380 x 150 mm
- Net Weight: 29.2 kg
- Gross Weight: 31.2 kg
Product Usage Instructions
Assembly Precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Lifting Flat Table.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts on a clear work area.
Use Precautions
- This product is not a toy. Do not allow children to play with or approach this item.
- Use as intended only. Do not sit or stand on the table.
- Inspect before every use. Do not use it if parts are loose or damaged.
- Use only on flat, level, and hard surfaces.
- We continue to be committed to provide you tools with competitive price.
- Save Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us.
- compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
- You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
- This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
- The appearance of the product shall be subject to the product you received.
- Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
WARNING:
- Please read this manual carefully before using the product. Failure to do so may result in serious injury. SAVE THIS MANUAL
ASSEMBLY PRECAUTIONS
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Lifting Flat Table.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts on a clear work area.
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy. Do not allow children to play with or approach this item.
- Use as intended only. Do not sit or stand on the table.
- Inspect before every use. Do not use it if parts are loose or damaged.
- Use only on flat, level, and hard surfaces.
TECHNICAL SPECIFICATIONS
Model| ZWE-DDJ-SS-11
ZWE-DDJ-SS-12
---|---
Adapter Rating(s)| 100-240V~, 50/60Hz, 1.5A
Main Material| Steel + Board
Color| Brown + Black
Product Dimensions (LxWxH)| ****
1200 x 600 x 1270 mm
Packing Size
(LxWxH)
| 1285 x 380 x 150 mm
Net Weight (kg)| 29.2
Gross Weight (kg)| 31.2
PACKAGE CONTENTS
ASSEMBLY STEPS
- STEP1 Foot installation
- STEP2 Motor installation
- First, insert the motor from the end of the hexagonal rod without a bump to the other end with a bump.
- Then, insert the convex end of the motor into leg B together with the motor. Tighten the motor on leg B with the screws shown in the picture.
STEP3 Drive rod installation
- After completing the previous step, insert leg C into the hex stick.
- If the holes are misaligned, hold the motor by hand and adjust the hex rod to rotate slightly so that the hex rod can be inserted into leg C.
STEP4 Beam installation
STEP5 Side wing installation
STEP6 Panel splicing
STEP6 Panel splicin 2
STEP7 Bookshelf installation
STEP8 Panel installation
STEP9 Accessories installation
STEP10 Line connection
STEP11 Drawer installation
Height Adjustment Controller Operation
- LED Display:
- Press any key once to wake up the LED display.
- UP Key:
- Press and hold the UP key to raise the desk.
- Down Key:
- Press and hold the DOWN key to lower the desk.
- Memory Kev:
- You must complete the Initialization Process to reset your desk before using it for the first time.
Detailed introduction of key functions
Reset
After running to the lowest height position, press and hold for 7 seconds. When the LED screen “rst” and “E-1” flash alternately, release the ↓ key, and press and hold the key again. After the desktop runs down to the lowest mechanical zero point, go back 5mm, the LED screen displays the lowest height value, and the reset is completed.
Set memory height
Press the S key once, and the height value will start flashing. At this
time, press the 1, 2, and 3 keys to save the current height to the
corresponding position.
Execute memory height
In normal state, press the number key to call up its corresponding height, and the lifting table will automatically run to the corresponding position.
Lock key S
- Press and hold the S key for 3 seconds. When the LED screen displays “SET”, learn to open the S key. Press the number key 3 to enter the lock screen state. At this time, the LED screen flashes and displays “OFF”.
- When the screen is locked, press and hold the S key for 3s, and the LED screen displays the height value. At this time, release the S key to complete the unlocking.
Restore factory settings S
- Press and hold the S key for 9 seconds, release the S key when the LED screen displays “FAC”, and operate the S key again to restore the factory settings.
Error Code Instructions
COMPLETION
- Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
- Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America
- SHUNSHUN GmbH
- Römeräcker 9 Z2021,76351
- Linkenheim-Hochstetten,Germany
- Pooledas Group Ltd
- Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
- Support and E-Warranty Certificate https://www.vevor.com/support
- Technical Support and E-Warranty Certificate https://www.vevor.com/support
NEED HELP? CONTACT US!
- Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com
Documents / Resources
|
VEVOR ZWE-DDJ-SS-11 Height Adjustable
Desk
[pdf] User Manual
ZWE-DDJ-SS-11 Height Adjustable Desk, ZWE-DDJ-SS-11, Height Adjustable Desk,
Adjustable Desk
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>